Ultra-high mobility in defect-free poly(3-hexylthiophene-2,5-diyl) field-effect transistors through supra-molecular alignment
Source abstract
Abstract
Abstract Performance enhancement of organic field-effect transistors (OFETs) based on solution-processable conjugated polymers (CPs) holds critical significance for the realization of cost-effective commercial applications such as organic light-emitting diode displays. One of the most critical performance parameters is the charge-carrier field-effect mobility (μFET) that is significantly influenced by the molecular arrangement in a CP. In this article, floating film transfer method (FTM) is utilized for the deposition of a CP––defect-free poly(3-hexylthiophene-2,5-diyl) (DF-P3HT)––which results in the formation of aligned supra-molecular assemblies. When applied as the active layer in OFET devices, μFET reaching as high as 8.0 cm2/V.s (6.3 cm2/V.s on average) is obtained. The value of μFET observed in the current study is the highest value reported so far for P3HT based OFETs (∼5 times higher as compared to when DF-P3HT is deposited using spin coating).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Hole mobility of 3.56 cm2 V−1 s−1 accomplished using more extended dithienothiophene with furan flanked diketopyrrolopyrrole polymer10.1039/C5TC01595B ↗
2. Influence of alkyl chain branching positions on the hole mobilities of polymer thin-film transistors10.1002/adma.201202689 ↗
3. Highly π-extended copolymers with diketopyrrolopyrrole moieties for high-performance field-effect transistors10.1002/adma.201201318 ↗
4. A stable solution-processed polymer semiconductor with record high-mobility for printed transistors10.1038/srep00754 ↗
5. High-mobility field-effect transistors fabricated with macroscopic aligned semiconducting polymers10.1002/adma.201305084 ↗
6. Klauk · 2006
7. 25th anniversary article: organic field-effect transistors: the path beyond amorphous silicon10.1002/adma.201304346 ↗
8. Nathan · 2006
9. Integrated optoelectronic devices based on conjugated polymers10.1126/science.280.5370.1741 ↗
10. Flexible organic transistors and circuits with extreme bending stability10.1038/nmat2896 ↗
11. Organic transistors in optical displays and microelectronic applications10.1002/adma.200903559 ↗
12. An OTFT-driven rollable OLED display10.1889/JSID19.4.316 ↗
13. Soluble and processable regioregular poly (3-hexylthiophene) for thin film field-effect transistor applications with high mobility10.1063/1.117834 ↗
14. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
15. Nalwa · 1997 · vol. 4
16. High mobility organic field-effect transistors based on defect-free regioregular poly(3-hexylthiophene-2,5-diyl)10.1016/j.orgel.2016.08.002 ↗
17. Enhancement of carrier mobility along with anisotropic transport in non-regiocontrolled poly(3-hexylthiophene) films processed by floating film transfer method10.1016/j.orgel.2016.08.003 ↗
18. The influence of mechanical rubbing on the field-effect mobility in polyhexylthiophene10.1063/1.1530720 ↗
19. Performance enhancement of poly(3-hexylthiophene-2,5-diyl) based field effect transistors through surfactant treatment of the poly(vinyl alcohol) gate insulator10.1039/C4CP02245A ↗
20. Effect of macromolecular parameters and processing conditions on supramolecular organisation, morphology and electrical transport properties in thin layers of regioregular poly(3-hexylthiophene)10.1016/j.synthmet.2006.04.012 ↗
21. Backbone arrangement in “friction-transferred” regioregular poly(3-alkylthiophene)s10.1021/ma025887t ↗
22. Toward precision control of nanofiber orientation in conjugated polymer thin films: impact on charge transport10.1021/acs.chemmater.6b04202 ↗
23. Charge-transport anisotropy due to grain boundaries in directionally crystallized thin films of regioregular poly (3-hexylthiophene)10.1002/adma.200802722 ↗
24. Interfacial insertion of a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) layer between the poly(3-hexylthiophene) semiconductor and cross-linked poly(vinyl alcohol) insulator layer in organic field-effect transistors10.1088/0022-3727/47/7/075102 ↗
25. 2D versus 3D crystalline order in thin films of regioregular poly(3-hexylthiophene) oriented by mechanical rubbing and epitaxy10.1002/adfm.201101139 ↗
26. Orientation characteristics of non-regiocontrolled poly(3-hexyl-thiophene) film by FTM on various liquid substrates10.1088/1742-6596/704/1/012005 ↗
27. Influence of backbone structure on orientation of conjugated polymers in the dynamic casting of thin floating-films10.1016/j.tsf.2016.11.015 ↗
28. A comparative study of spin coated and floating film transfer method coated poly(3-hexylthiophene)/poly(3-hexylthiophene)-nanofibers based field effect transistors10.1063/1.4894458 ↗
29. Enhancement of transport characteristics in poly(3-hexylthiophene) films deposited with floating film transfer method10.1143/APEX.2.111502 ↗
30. Controlling factors for orientation of conjugated polymer films in dynamic floating-film transfer method10.1166/jnn.2017.12816 ↗
31. Optical and transport anisotropy in poly (9,9'-dioctyl-fluorene-alt-bithiophene) films prepared by floating film transfer method10.1143/JJAP.51.055802 ↗
32. Macroscopic self ordering of solution processible poly(3,3’’’-dialkylquaterthiophene) by floating film transfer method10.1063/1.4817288 ↗
33. IEEE Standard for Test Methods for the Characterization of Organic Transistors and Materials, IEEE Std 1620TM-2008, New York.
34. A general relationship between disorder, aggregation and charge transport in conjugated polymers10.1038/nmat3722 ↗
35. Large modulation of carrier transport by grain-boundary molecular packing and microstructure in organic thin films10.1038/nmat2570 ↗
36. Polymer-dielectric molecular interactions in defect-free poly(3-hexylthiophene): dependence and consequences of regioregularity on transistor charge transport properties10.1088/1361-6641/aa75c7 ↗
37. Brown · Phys. Rev. B · 2003 · 67 · 06420310.1103/PhysRevB.67.064203 ↗
38. Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight10.1021/ma047415f ↗
39. The Scherrer formula for X-ray particle size determination10.1103/PhysRev.56.978 ↗
40. The oligothiophene-based field-effect transistor: how it works and how to improve it10.1063/1.345238 ↗
41. Charge transport in polymeric transistors10.1016/S1369-7021(07)70018-4 ↗
42. On the role of single regiodefects and polydispersity in regioregular poly(3-hexylthiophene): defect distribution, synthesis of defect-free chains, and a simple model for the determination of crystallinity10.1021/ja210871j ↗
43. Correlation between photovoltaic performance and interchain ordering induced delocalization of electronics states in conjugated polymer blends10.1021/acsami.6b05541 ↗
44. Mobile ionic impurities in poly(vinyl alcohol) gate dielectric:possible source of the hysteresis in organic field-effect transistors10.1002/adma.200701479 ↗
45. Increased mobility from regioregular poly (3-hexylthiophene) field-effect transistors10.1063/1.1568526 ↗
46. Enhanced mobility of poly (3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents10.1021/cm049617w ↗
47. Enhancement of field-effect mobility due to surface-mediated molecular ordering in regioregular polythiophene thin film transistors10.1002/adfm.200400054 ↗
48. Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic10.1038/nmat2291 ↗
49. High mobility top-gated poly (3-hexylthiophene) field-effect transistors with high work-function Pt electrodes10.1016/j.tsf.2010.01.026 ↗
50. High performance airbrushed organic thin film transistors10.1063/1.3360230 ↗
51. Low-voltage poly (3-hexylthiophene)/poly (vinyl alcohol) field-effect transistor and inverter10.1109/TED.2012.2187904 ↗
52. Gate dielectric surface treatments for performance improvement of poly(3-hexylthiophene-2,5-diyl) based organic field-effect transistors
53. Study of poly(3-hexylthiophene)/cross-linked poly(vinyl alcohol) as semiconductor/insulator for application in low voltage organic field effect transistors10.1063/1.4809285 ↗
54. Modification of the charge transport properties of the copper phthalocyanine/poly(vinyl alcohol) interface using cationic or anionic surfactant for field-effect transistor performance enhancement10.1088/0022-3727/48/33/335104 ↗
55. Transition from bulk transport to surface transport in organic field effect transistors10.1103/PhysRevB.81.085305 ↗
56. Current–voltage characteristics in organic field-effect transistors. Effect of interface dipoles10.1016/j.chemphys.2014.11.015 ↗
57. Poly(vinyl alcohol) gate dielectric surface treatment with vitamin C for poly(3-hexylthiophene-2,5-diyl) based field effect transistors performance improvement10.1016/j.orgel.2014.11.015 ↗