journal article·2019-04

Enhanced efficiency and light stability of planar perovskite solar cells by diethylammonium bromide induced large-grain 2D/3D hybrid film

Xin Huang, Wentao Bi, Pengcheng Jia, Yang Tang, Zhidong Lou, Yufeng Hu, Qiuhong Cui, Yanbing Hou, Feng Teng

Publisher page

Abstract

Abstract In this work, diethylammonium bromide (DABr) is used in planar perovskite solar cells to post-treat methylammonium iodide (MAPbI3) films to fabricate high quality 2D/3D perovskite hybrid films. DABr treatment not only induces the small crystals secondary growth into large crystals, which lead to the formation of large-grain 3D perovskite films, but also forms a 2D DA2PbI4-xBrx capping layer on the MAPbI3 surface. The 2D DA2PbI4-xBrx capping layer improves the moisture stability of the films. The larger grains and better crystallized 2D/3D perovskite films with fewer defects and interfacial contact between TiOx layer and active layer are beneficial to eliminate the light soaking effect and enhances the light stability. Transient PL spectra reveal that the 2D layer can act as an interface modification layer to promote the photogenerated carrier dissociation and hole extraction. By applying MAPbI3 and 2D/3D perovskite film as light absorbers in PVSCs, we are able to enhance PCE from 14.37% to 18.30%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization10.1038/ncomms8586 ↗
2. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
3. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
4. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
5. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
6. NREL efficiency Chart, https://www.nrel.gov/pv/assets/pdfs/pv-efficiency-chart.20181214.pdf.
7. Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite10.1039/C7TA00366H ↗
8. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
9. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
10. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
11. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
12. Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates10.1038/ncomms3761 ↗
13. Elimination of the light soaking effect and performance enhancement in perovskite solar cells using a fullerene derivative10.1039/C6EE01337F ↗
14. Facile fabrication of large-grain CH3NH3PbI3-xBrx films for high-efficiency solar cells via CH3NH3Br-selective Ostwald ripening10.1038/ncomms12305 ↗
15. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells
16. Effects of organic cation additives on the fast growth of perovskite thin films for efficient planar heterojunction solar cells10.1021/acsami.6b06633 ↗
17. Largely enhanced VOC and stability in perovskite solar cells with modified energy match by coupled 2D interlayers10.1039/C7TA11295E ↗
18. High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells10.1038/nature18306 ↗
19. 2D homologous perovskites as light-absorbing materials for solar cell applications10.1021/jacs.5b03796 ↗
20. Self-assembled TiO2Nanorods as electron extraction layer for high-performance inverted polymer solar cells10.1021/cm5028833 ↗
21. Optimized interface and recrystallized grains by CsBr treatment for enhanced photovoltaic performance of perovskite solar cells10.1016/j.jpowsour.2018.04.008 ↗
22. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
23. Dynamic study of the light soaking effect on perovskite solar cells by in-situ photoluminescence microscopy10.1016/j.nanoen.2018.02.024 ↗
24. High-performance inverted planar heterojunction perovskite solar cells based on lead acetate precursor with efficiency exceeding 18%10.1002/adfm.201601175 ↗
25. Synthesis and crystal chemistry of the hybrid perovskite (CH3NH3)PbI3 for solid-state sensitised solar cell applications10.1039/c3ta10518k ↗
26. Fabrication of perovskite films using an electrostatic assisted spray technique: the effect of the electric field on morphology, crystallinity and solar cell performance10.1039/C5NR08350H ↗
27. Reversible halide exchange reaction of organometal trihalide perovskite colloidal nanocrystals for full-range band gap tuning10.1021/acs.nanolett.5b01430 ↗
28. Influence of halide composition on the structural, electronic, and optical properties of mixedCH3NH3Pb(I1−xBrx)3perovskites calculated using the virtual crystal approximation method10.1103/PhysRevB.94.125139 ↗
29. Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface10.1039/C6EE03182J ↗
30. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers10.1039/C4EE01138D ↗
31. One-Year stable perovskite solar cells by 2D/3D interface engineering10.1038/ncomms15684 ↗
32. Ligand-stabilized reduced-dimensionality perovskites10.1021/jacs.5b11740 ↗
33. Perovskite energy funnels for efficient light-emitting diodes10.1038/nnano.2016.110 ↗
34. Transforming hybrid organic inorganic perovskites by rapid halide exchange10.1021/acs.chemmater.5b00281 ↗
35. First-principles study of novel two-dimensional (C4H9NH3)2PbX4 perovskites for solar cell absorbers10.1021/acs.jpclett.7b00003 ↗
36. Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells10.1039/C6EE00409A ↗
37. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
38. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
39. Restrained light-soaking and reduced hysteresis in perovskite solar cells employing a helical perylene diimide interfacial layer10.1039/C8TA02584C ↗
40. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
41. The effect of the microstructure on trap-assisted recombination and light soaking phenomenon in hybrid perovskite solar cells10.1002/adfm.201602519 ↗
42. Photovoltage behavior in perovskite solar cells under light-soaking showing photoinduced interfacial changes10.1021/acsenergylett.7b00212 ↗
43. Revealing underlying processes involved in light soaking effects and hysteresis phenomena in perovskite solar cells10.1002/aenm.201500279 ↗
44. Impact of the electron-transport layer on the performance of solution-processed small-molecule organic solar cells10.1002/cssc.201402171 ↗
45. Hybrid perovskites for photovoltaics: charge-carrier recombination, diffusion, and radiative efficiencies10.1021/acs.accounts.5b00411 ↗
46. Charge-carrier dynamics in vapour-deposited films of the organolead halide perovskite CH3NH3PbI3−xClx10.1039/C4EE01358A ↗
47. Temperature-dependent charge-carrier dynamics in CH3NH3PbI3Perovskite thin films10.1002/adfm.201502340 ↗
48. Charge-carrier dynamics in organic-inorganic metal halide perovskites10.1146/annurev-physchem-040215-112222 ↗
49. Correlated electron-hole plasma in organometal perovskites10.1038/ncomms6049 ↗
50. Masters · 2008
51. Layer-by-Layer assembly of sintered cdsexte1–x nanocrystal solar cells10.1021/nn3009189 ↗
52. Hybrid perovskite/perovskite heterojunction solar cells10.1021/acsnano.6b01535 ↗
53. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
54. Enhanced performance in inverted polymer solar cells employing microwave-annealed sol-gel ZnO as electron transport layers10.1016/j.orgel.2016.12.031 ↗
55. On the differences between dark and light ideality factor in polymer:fullerene solar cells10.1021/jz4012146 ↗