Enhanced UV stability of perovskite solar cells with a SrO interlayer
Source abstract
Abstract
Abstract We investigated strontium oxide (SrO) as an interlayer material to enhance the UV stability of a CH3NH3PbI3 perovskite solar cell. Moisture and over 400 nm wavelength of light were excluded to investigate the effect of UV light only. Two different interlayer fabrication processes were examined to optimize the performance of this solar cell. Devices fabricated by dipping for 30 min in SrO solution exhibited photoconversion efficiencies of 15.5%, whereas those fabricated with 60-min dipping showed photoconversion efficiencies of 15% and exhibited local Sr agglomeration. Devices with SrO displayed lower initial efficiencies than those without any SrO layer (17.6%), However, a device without SrO retained only 34.4% of its initial efficiency after 100 h of UV exposure. In contrast, SrO-incorporated devices retained almost 60.0% of their initial efficiency. Severe μ-PL mapping intensity degradation was observed in devices that did not include the interlayer, but no degradation was observed in those with the SrO interlayer. This can be attributed to the passivation of the degradation sites by SrO.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. NREL Efficiency Chart. http://www.nrel.gov/ncpv/images/efficiency_chart.jpg.
2. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
3. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
4. Optical properties of organometal halide perovskite thin films and general device structure design rules for perovskite single and tandem solar cells10.1039/C4TA05237D ↗
5. Electro-optics of perovskite solar cells10.1038/nphoton.2014.284 ↗
6. Complex refractive index spectra of CH3NH3PbI3 perovskite thin films determined by spectroscopic ellipsometry and spectrophotometry10.1021/jz502471h ↗
7. Refractive index and extinction coefficient of CH3NH3PbI3 studied by spectroscopic ellipsometry10.1364/OME.5.000029 ↗
8. Charge-Carrier dynamics in vapour-deposited films of the organolead halide perovskite CH3NH3PbI3-xClx10.1039/C4EE01358A ↗
9. General working principles of CH3NH3PbX3 perovskite solar cells10.1021/nl404252e ↗
10. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
11. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
12. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
13. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
14. Temperature-assisted rapid nucleation: a facile method to optimize the film morphology for perovskite solar cells10.1039/C7TA06334B ↗
15. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
16. Efficient monolithic perovskite/silicon tandem solar cell with cell area > 1 cm(2)10.1021/acs.jpclett.5b02686 ↗
17. Perovskite-perovskite tandem photovoltaics with optimized band gaps10.1126/science.aaf9717 ↗
18. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
19. Efficient monolithic perovskite/perovskite tandem solar cells10.1002/aenm.201602121 ↗
20. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
21. Effects of surface blocking layer of Sb2S3 on nanocrystalline TiO2 for CH3NH3PbI3 perovskite solar cells10.1021/jp500449z ↗
22. UV degradation and recovery of perovskite solar cells
23. Intrinsic thermal instability of methylammonium lead trihalide perovskite10.1002/aenm.201500477 ↗
24. Electric-field-induced degradation of methylammonium lead iodide perovskite solar cells10.1021/acs.jpclett.6b01176 ↗
25. Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification10.1039/C5EE03522H ↗
26. Retarding charge recombination in perovskite solar cells using ultrathin MgO-coated TiO2 nanoparticulate films10.1039/C4TA03684K ↗
27. Enhancement of photovoltaic performance of perovskite solar cells by modification of the interface between the perovskite and mesoporous TiO2 film10.1016/j.solmat.2016.05.004 ↗
28. Solvothermal synthesis of hierarchical TiO2 microstructures with high crystallinity and superior light scattering for high-performance dye-sensitized solar cells10.1021/acsami.7b07321 ↗
29. Mesoporous SnO2 electron selective contact enables UV-stable perovskite solar cells10.1016/j.nanoen.2016.10.055 ↗
30. Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells10.1126/science.aam6620 ↗
31. Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells10.1038/ncomms3885 ↗
32. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
33. Enhanced energy conversion efficiency of the Sr2+-modified nanoporous TiO2 electrode sensitized with a ruthenium complex10.1021/cm010609e ↗
34. Quantitative Carrier lifetime measurement with micron resolution10.1063/1.3462433 ↗
35. Analysing the effect of crystal size and structure in highly efficient CH 3 NH 3 PbI 3 perovskite solar cells by spatially resolved photo-and electroluminescence imaging10.1039/C5NR05308K ↗
36. Tailored SrTiO 3/TiO 2 heterostructures for dye-sensitized solar cells with enhanced photoelectric conversion performance10.1039/C5TA02556G ↗
37. Mixed cation hybrid lead halide perovskites with enhanced performance and stability10.1039/C7TA00042A ↗