Effect of processing additive 1,8-octanedithiol on the lifetime of PCPDTBT based Organic Photovoltaics
Source abstract
Abstract
The effect that processing additives have upon the lifetime of PCPDTBT-based OPVs has been investigated. The results show conclusively that whilst ODT processing additive enhances the initial performance of PCPDTBT:PCBM OPVs, it is detrimental to their long term performance, when measured under light soaking at 1 Sun of irradiance. Results are shown for both encapsulated and non-encapsulated devices. Topographical and morphological measurements made using AFM and small- and wide-angle X-ray scattering of active layers show that there are greater morphological changes of devices fabricated with the 1,8-octanedithiol upon light soaking, revealing a relatively venerable morphology of the active layer processed with the additive, when subject to light soaking.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Lead candidates for high-performance organic photovoltaics from high-throughput quantum chemistry–the Harvard Clean Energy Project10.1039/C3EE42756K ↗
2. Optimisation of PCPDTBT solar cells using polymer synthesis with Suzuki coupling10.1016/j.solmat.2011.03.022 ↗
3. The role of processing in the fabrication and optimization of plastic solar cells10.1002/adma.200802559 ↗
4. Free energy control of charge photogeneration in polythiophene/fullerene solar cells: the influence of thermal annealing on P3HT/PCBM blends10.1002/adfm.200800727 ↗
5. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
6. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
7. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
8. “Plastic” solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
9. Bulk heterojunction bipolar field-effect transistors processed with alkane dithiol10.1016/j.orgel.2008.08.017 ↗
10. You · Nat. Commun. · 2013 · 4 · 144610.1038/ncomms2411 ↗
11. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
12. Influence of processing additives to nano-morphology and efficiency of bulk-heterojunction solar cells: a comparative ∗review10.1016/j.solener.2010.10.012 ↗
13. Pd-catalysed direct arylation polymerisation for synthesis of low-bandgap conjugated polymers and photovoltaic performance10.1002/marc.201200368 ↗
14. Effect of hole transporting layers on the performance of PCPDTBT: PCBM organic solar cells10.1088/0022-3727/45/12/125102 ↗
15. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
16. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
17. Encapsulation of pentacene/C organic solar cells with AlO deposited by atomic layer deposition10.1063/1.2751108 ↗
18. Cyclopentadithiophene based polymers – a comparison of optical, electrochemical and organic field-Effect transistor characteristics10.1039/b924126d ↗
19. Charge carrier lifetime and recombination in bulk heterojunction solar cells10.1109/JSTQE.2010.2044978 ↗
20. 1,8-octanedithiol as a processing additive for bulk heterojunction materials: enhanced photoconductive response10.1063/1.2969405 ↗
21. A small/wide-angle X-ray scattering instrument for structural characterization of air-liquid interfaces, thin films, and bulk specimens10.1107/S0021889809043271 ↗
22. Competition between fullerene aggregation and poly(3-hexylthiophene) crystallization upon annealing of bulk heterojunction solar cells10.1021/nn2010816 ↗
23. Organic photovoltaics based on a crosslinkable PCPDTBT analogue; synthesis, morphological studies, solar cell performance and enhanced lifetime10.1039/c3ta11002h ↗
24. Improving device efficiency of polymer/fullerene bulk heterojunction solar cells through enhanced crystallinity and reduced grain boundaries induced by solvent additives10.1002/adma.201101274 ↗