Phase separation-driven stratification in conventional and inverted P3HT:PCBM organic solar cells
Source abstract
Abstract
We have used neutron reflectivity to investigate the stratification of poly(3-hexylthiophene) (P3HT) and phenyl-C 61 -butyric acid methyl ester (PCBM) blend films. Films were spun-cast on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and titanium oxide (TiOx) layers to mimic the procedures followed for the fabrication of conventional and inverted organic photovoltaics respectively. The resultant scattering length density profiles reveal a PCBM-rich layer is formed in the vicinity of PEDOT:PSS or TiOx, while PCBM is depleted at the free surface of the film. PCBM segregation close to the substrate is further enhanced by annealing. This stratification is considered to be favorable only for inverted devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A review on the development of the inverted polymer solar cell architecture10.1080/15583724.2010.515764 ↗
2. Structural complexities in the active layers of organic electronics10.1146/annurev-chembioeng-073009-100851 ↗
3. Surface-directed spinodal decomposition10.1103/PhysRevLett.66.1326 ↗
4. Lamellar structure in a thin polymer blend film10.1016/0032-3861(94)90223-2 ↗
5. Wetting at polymer surfaces and interfaces10.1016/S0079-6700(02)00080-1 ↗
6. An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films10.1038/nmat1476 ↗
7. Surface segregation and self-stratification in blends of spin-cast polyfluorene derivatives
8. A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams10.1021/nn200744q ↗
9. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
10. Effects of active layer thickness and thermal annealing on polythiophene: fullerene bulk heterojunction photovoltaic devices10.1063/1.3474654 ↗
11. S. Hotta, Electronic and Optical Properties of Conjugated Molecular Systems in Condensed Phases, Research Signpost, 2003.
12. Humidity and solvent effects in spin-coated polythiophene–polystyrene blends10.1002/app.26012 ↗
13. The morphology of as-cast films of a polymer blend: dependence on polymer molecular weight10.1002/polb.1995.090330815 ↗
14. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
15. Interfacial segregation in polymer/fullerene blend films for photovoltaic devices10.1021/ma100027b ↗
16. Depletion of PCBM at the cathode interface in P3HT/PCBM thin films as quantified via neutron reflectivity measurements10.1002/adma.200903971 ↗
17. Nanoparticle concentration profile in polymer-based solar cells10.1039/B920979D ↗
18. PS-b-P3HT copolymers as P3HT/PCBM interfacial compatibilizers for high efficiency photovoltaics10.1002/adma.201103361 ↗
19. Solvent-induced morphology in polymer-based systems for organic photovoltaics10.1002/adfm.201100945 ↗
20. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
21. Substrate-dependent interface composition and charge transport in films for organic photovoltaics10.1063/1.3149706 ↗
22. Device characteristics of bulk-heterojunction polymer solar cells are independent of interfacial segregation of active layers10.1021/cm200320u ↗
23. Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells10.1021/nl8014022 ↗
24. Optimization of the bulk heterojunction composition for enhanced photovoltaic properties: correlation between the molecular weight of the semiconducting polymer and device performance10.1021/jp207669j ↗
25. Block copolymer as a nanostructuring agent for high-efficiency and annealing-free bulk heterojunction organic solar cells10.1002/adma.201104461 ↗
26. EROS II: a boosted time-of-flight reflectometer for multi-purposes applications at the Laboratoire Léon Brillouin10.1140/epjp/i2011-11109-6 ↗
27. Phase-sensitive neutron reflectometry measurements applied in the study of photovoltaic films10.1063/1.3471583 ↗
28. Co-refinement of multiple-contrast neutron/X-ray reflectivity data using MOTOFIT10.1107/S0021889806005073 ↗
29. Morphological modification induced by external electric field during solution process of organic solar cells10.1016/j.orgel.2011.11.009 ↗