Cyclopentadithiophene–benzothiadiazole oligomers: Synthesis via direct arylation, X-ray crystallography, optical properties, solution casted field-effect transistor and photovoltaic characteristics
Source abstract
Abstract
Abstract This article reports the synthesis, crystallographic structure and OFET and OPV performance of the conjugated oligomer of cyclopentadithiophene (CPDT) with benzothiadiazole (BT). Synthesis of the oligomer composed of the CPDT-BT-CPDT sequence is accomplished using direct arylation reactions. Theoretical and experimental X-ray single crystallography confirms that two CPDT-BT-CPDT molecules are not entirely disordered, but are actually stacking directly across each other at the central BT units with an intermolecular distance of 3.61 A, providing valuable insight into the polymer bulk structure. The performance of the oligomer in OFET devices is investigated by fabricating bottom gate top contact devices and demonstrates a hole mobility of 5.0 × 10−3 cm2 V−1 s−1. OPV devices of the oligomer blended with PC61BM and PC71BM show power conversion efficiency (PCE) of 1.61%. One potential use for the oligomer could be as a sensitiser in a ternary blend with P3HT–PC61BM or PCPDTBT–PC61BM OPVs; the PCE can be relatively increased by 3–9% depending on concentration, primarily as a result of increased short circuit current density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Conjugated polymers for high-efficiency organic photovoltaics10.1039/b9py00325h ↗
2. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
3. Semiconducting polymers: the Third Generation10.1039/b914956m ↗
4. Electroactive materials for organic electronics: preparation strategies, structural aspects and characterization techniques10.1039/b907999h ↗
5. Organic thin-film transistors10.1039/b909902f ↗
6. Photovoltaics from soluble small molecules10.1016/S1369-7021(07)70277-8 ↗
7. Organic semiconductors for solution-processable field-effect transistors (OFETs)10.1002/anie.200701920 ↗
8. Novel small molecules for organic field-effect transistors: towards processability and high performance10.1039/b614393h ↗
9. Efficient vacuum-deposited organic solar cells based on a new low-bandgap oligothiophene and fullerene C-6010.1002/adma.200600658 ↗
10. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
11. A low band gap, solution processable oligothiophene with a dialkylated diketopyrrolopyrrole chromophore for use in bulk heterojunction solar cells10.1063/1.3086897 ↗
12. Ultrahigh mobility in polymer field-effect transistors by design10.1021/ja108861q ↗
13. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
14. Cyclopentadithiophene based polymers – a comparison of optical, electrochemical and organic field-effect transistor characteristics10.1039/b924126d ↗
15. Cyclopentadithiophene–benzothiadiazole oligomers and polymers: synthesis, characterisation, field-effect transistor and photovoltaic characteristics10.1039/C1JM12449H ↗
16. Catalytic intermolecular direct arylation of perfluorobenzenes10.1021/ja062509l ↗
17. C2, C5, and C4 azole N-oxide direct arylation including room-temperature reactions10.1021/ja7107068 ↗
18. Transition-metal-catalyzed direct arylation of (hetero)arenes by C–H bond cleavage10.1002/anie.200902996 ↗
19. Synthesis of thiophene- and bithiophene-based alternating copolymers via Pd-catalyzed direct C–H Arylation10.1021/mz200067s ↗
20. Facile synthesis of 2,5-diarylthiazoles via palladium-catalyzed tandem C–H substitutions. Design of tunable light emission and liquid crystalline characteristics10.1021/ja0289189 ↗
21. Synthesis of Poly(4,4-dialkyl-cyclopenta[2,1-b:3,4-b′]dithiophene-alt-2,1,3-benzothiadiazole) (PCPDTBT) in a direct arylation scheme10.1021/mz300093w ↗
22. Atomistic band gap engineering in donor–acceptor polymers10.1021/ja208917m ↗
23. Polarity-sensitive coumarins tailored to live cell imaging10.1021/ja9050444 ↗
24. Dibenzoborole-containing pi-electron systems: remarkable fluorescence change based on the “on/off” control of the pi–pi∗ conjugation10.1021/ja026689k ↗
25. New conjugated polymers with donor–acceptor architectures: synthesis and photophysics of carbazole–quinoline and phenothiazine–quinoline copolymers and oligomers exhibiting large intramolecular charge transfer10.1021/ma0100448 ↗
26. Synthesis and characterization of new fluorene-acceptor alternating and random copolymers for light-emitting applications10.1016/j.polymer.2005.11.058 ↗
27. Design rules for donors in bulk-heterojunction solar cells – towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
28. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
29. Optimisation of PCPDTBT solar cells using polymer synthesis with Suzuki coupling10.1016/j.solmat.2011.03.022 ↗