journal article·2018-08Open access

Environmentally friendly preparation of nanoparticles for organic photovoltaics

Xun Pan, Anirudh Sharma, Desta Gedefaw, Renee Kroon, Amaia Diaz de Zerio, Natalie P. Holmes, A.L. David Kilcoyne, Matthew G. Barr, Adam Fahy, Melissa Marks, Xiaojing Zhou, Warwick Belcher, Paul C. Dastoor, Mats R. Andersson

Abstract

Aqueous nanoparticle dispersions were prepared from a conjugated polymer poly[thiophene-2,5-diyl-alt-5,10-bis((2-hexyldecyl)oxy)dithieno[3,2-c:3′,2′-h][1,5]naphthyridine-2,7-diyl] (PTNT) and fullerene blend utilizing chloroform as well as a non-chlorinated and environmentally benign solvent, o-xylene, as the miniemulsion dispersed phase solvent. The nanoparticles (NPs) in the solid-state film were found to coalesce and offered a smooth surface topography upon thermal annealing. Organic photovoltaics (OPVs) with photoactive layer processed from the nanoparticle dispersions prepared using chloroform as the miniemulsion dispersed phase solvent were found to have a power conversion efficiency (PCE) of 1.04%, which increased to 1.65% for devices utilizing NPs prepared from o-xylene. Physical, thermal and optical properties of NPs prepared using both chloroform and o-xylene were systematically studied using dynamic mechanical thermal analysis (DMTA) and photoluminescence (PL) spectroscopy and correlated to their photovoltaic properties. The PL results indicate different morphology of NPs in the solid state were achieved by varying miniemulsion dispersed phase solvent.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries)10.1016/j.rser.2014.11.066 ↗
2. The role of renewable energy in climate stabilization: results from the EMF27 scenarios10.1007/s10584-013-0924-z ↗
3. Preface: overview of the forum on solar and renewable energy10.1021/ic058006i ↗
4. [6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells10.1002/aenm.201300425 ↗
5. Kalogirou · 2013
6. Solution-processed cathode interfacial layer materials for high-efficiency polymer solar cells10.1016/j.mattod.2015.02.016 ↗
7. Solubility based identification of green solvents for small molecule organic solar cells10.1002/adfm.201301509 ↗
8. Roll-to-Roll inkjet printing and photonic sintering of electrodes for ITO free polymer solar cell modules and facile product integration10.1002/aenm.201200520 ↗
9. Ultrafast formation of air-processable and high-quality polymer films on an aqueous substrate10.1038/ncomms12374 ↗
10. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
11. Optimization of the power conversion efficiency in high bandgap pyridopyridinedithiophene-based conjugated polymers for organic photovoltaics by the random terpolymer approach10.1016/j.eurpolymj.2017.03.044 ↗
12. A multilayered approach to polyfluorene water-based organic photovoltaics10.1016/j.solmat.2012.03.016 ↗
13. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
14. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
15. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
16. Industrial solvents and liver toxicity: risk assessment, risk factors and mechanisms10.1078/1438-4639-00175 ↗
17. Chlorinated solvents in groundwater of the United States10.1021/es061553y ↗
18. Green-solvent-processed molecular solar cells10.1002/anie.201409208 ↗
19. Green-solvent-processable organic solar cells10.1016/j.mattod.2016.02.019 ↗
20. Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9%10.1039/C7EE00619E ↗
21. Charge generation and morphology in P3HT: PCBM nanoparticles prepared by mini-emulsion and reprecipitation methods10.1039/C5NR06244F ↗
22. Surfactant-free nanoparticulate organic photovoltaics10.1016/j.solmat.2013.10.010 ↗
23. Eco-friendly fabrication of 4% efficient organic solar cells from surfactant-free P3HT: ICBA nanoparticle dispersions10.1002/adma.201402360 ↗
24. Semiconducting polymer nanospheres in aqueous dispersion prepared by a miniemulsion process10.1002/1521-4095(20020503)14:9<651::AID-ADMA651>3.0.CO;2-V ↗
25. Nano-domain behaviour in P3HT: PCBM nanoparticles, relating material properties to morphological changes10.1016/j.solmat.2013.06.003 ↗
26. Tuning of PCDTBT: PC71BM blend nanoparticles for eco-friendly processing of polymer solar cells10.1016/j.solmat.2016.09.008 ↗
27. Aqueous nanoparticle polymer solar cells: effects of surfactant concentration and processing on device performance10.1021/acsami.7b00557 ↗
28. Photoactive donor-acceptor composite nanoparticles dispersed in water10.1021/acs.langmuir.6b04496 ↗
29. Aqueous PCDTBT: PC71 BM photovoltaic inks made by nanoprecipitation10.1002/marc.201700504 ↗
30. Monodisperse conjugated polymer particles by Suzuki-Miyaura dispersion polymerization10.1038/ncomms2085 ↗
31. Light-switchable and monodisperse conjugated polymer particles10.1021/mz400362g ↗
32. Low bandgap semiconducting copolymer nanoparticles by Suzuki cross-coupling polymerization in alcoholic dispersed media10.1002/marc.201500324 ↗
33. Determining the structural motif of P3HT: PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
34. Eco-friendly fabrication of PBDTTPD: PC71BM solar cells reaching a PCE of 3.8% using water-based nanoparticle dispersions10.1016/j.orgel.2016.12.018 ↗
35. A new tetracyclic lactam building block for thick, broad-bandgap photovoltaics10.1021/ja5051692 ↗
36. Poly(4-vinylpyridine): a new interface layer for organic solar cells10.1021/acsami.6b12687 ↗
37. Nano-pathways: bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics10.1016/j.nanoen.2015.11.021 ↗
38. Application of gradient-based Hough transform to the detection of corrosion pits in optical images10.1016/j.apsusc.2015.12.207 ↗
39. Unravelling the thermomechanical properties of bulk heterojunction blends in polymer solar cells10.1021/acs.macromol.7b00430 ↗
40. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO Film as an electron transport layer10.1002/adma.201004301 ↗
41. PCBM concentration dependent morphology of P3HT in composite P3HT/PCBM nanoparticles10.1016/j.cplett.2009.05.066 ↗
42. Correlation between spectroscopic and morphological properties of composite P3HT/PCBM nanoparticles studied by single particle spectroscopy10.1016/j.jlumin.2009.11.031 ↗
43. Water-based nanoparticulate solar cells using a diketopyrrolopyrrole donor polymer10.1039/c3cp55037k ↗
44. Organic solar cells: an overview focusing on active layer morphology10.1007/s11120-005-6397-9 ↗
45. Phase separation in bulk heterojunctions of semiconducting polymers and fullerenes for photovoltaics10.1146/annurev-physchem-040513-103712 ↗
46. The role of miscibility in polymer:fullerene nanoparticulate organic photovoltaic devices10.1016/j.nanoen.2013.03.009 ↗
47. The effect of mesomorphology upon the performance of nanoparticulate organic photovoltaic devices10.1016/j.solmat.2015.02.028 ↗
48. Inverted all-polymer solar cells based on a quinoxaline–thiophene/naphthalene-diimide polymer blend improved by annealing10.1039/C6TA00531D ↗
49. In situ characterization of polymer–fullerene bilayer stability10.1021/ma5021227 ↗
50. The effect of polymer molecular weight on P3HT: PCBM nanoparticulate organic photovoltaic device performance10.1016/j.solmat.2014.05.046 ↗
51. Structure and crystallinity of water dispersible photoactive nanoparticles for organic solar cells10.1039/C5TA04980F ↗
52. DMTA and FTIR investigation of the phase behavior of poly(methyl methacrylate)−Poly(4-vinylphenol) blends10.1021/ma950909f ↗
53. Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair10.1016/j.compositesb.2006.06.002 ↗
54. Relaxation phenomena in polymers
55. Study of crystallinity and thermomechanical analysis of annealed poly(ethylene terephthalate) films10.1016/j.eurpolymj.2008.02.024 ↗
56. Structural hierarchy in melt-processed poly(3-hexyl thiophene)−montmorillonite clay Nanocomposites: novel physical, mechanical, optical, and conductivity properties10.1021/jp055234p ↗
57. Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics10.1063/1.2730756 ↗
58. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
59. P3HT/PCBM bulk heterojunction solar cells: impact of blend composition and 3D morphology on device performance10.1002/adfm.200902247 ↗
60. Dynamic quenching of 5-(2'-ethyl-hexyloxy)-p-phenylene vinylene (MEH-PPV) by charge transfer to a C60 derivative in solution10.1002/app.2106 ↗
61. Fabrication conditions for efficient organic photovoltaic cells from aqueous dispersions of nanoparticles10.1039/C4RA07463G ↗
62. The origin of performance limitations in miniemulsion nanoparticulate organic photovoltaic devices10.1016/j.solmat.2017.09.007 ↗
63. Overcoming microstructural limitations in water processed organic solar cells by engineering customized nanoparticulate inks10.1002/aenm.201702857 ↗
64. Domain compositions and fullerene aggregation govern charge photogeneration in polymer/fullerene solar cells10.1002/aenm.201400116 ↗