journal article·2018-10

Dependence of power conversion properties of hole-conductor-free mesoscopic perovskite solar cells on the loading of perovskite crystallites

Hui Chen, Kangming Li, Huang Liu, Yongli Gao, Yongbo Yuan, Bingchu Yang, Conghua Zhou

Publisher page

Abstract

Abstract Effect of the loading of perovskite crystallites on the power conversion properties of carbon based hole-conductor-free mesoscopic perovskite solar cells is studied by varying the concentration of the perovskite precursor from 0.3 to 1.0 mol/L (at given volume of 30 μL). It is observed that, when the concentration is 0.3 mol/L, poor filling is obtained due to relatively low loading of perovskite, and the perovskite solar cells suffer from huge dispersion in efficiencies and large hysteresis index (averaged at 18.29% and up to 34.61%). With increment of the concentration (from 0.4 to 1.0 mol/L), crystallinity of perovskite crystallites is improved according to X-ray diffraction studies, and the lifetime of photo-generated charge carriers is prolonged as reflected by transient photovoltaic (TPV) detection. Meanwhile, the open circuit voltage rises up from 0.86 (±0.03) V to 0.91 (±0.01) V, and the hysteresis index is reduced from 10.02 (±4.67)% to 1.45 (±2.21)%. However, the film conductance of carbon film is decreased due to the loading of perovskite, which deteriorates the fill factor of the devices. Finally, optimized power conversion efficiency is achieved at moderate concentration or 0.6 mol/L, which is 12.59 (±0.40) %, compared to 11.81 (±0.36) % at 1.0 mol/L. Due to the barrier provided by the carbon film against H2O/O2, all of the devices showed good shelf-stability, though loading of perovskite is varied in these devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Low-temperature processed meso-superstructured to thin-film perovskite solar cells10.1039/c3ee40810h ↗
3. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells10.1038/nnano.2014.181 ↗
4. Air-stable, efficient mixed-cation perovskite solar cells with Cu electrode by scalable fabrication of active layer10.1002/aenm.201600372 ↗
5. Soft-cover deposition of scaling-up uniform perovskite thin films for high cost-performance solar cells10.1039/C6EE01411A ↗
6. Stable organic-inorganic perovskite solar cells without hole-conductor layer achieved via cell structure design and contact engineering10.1002/adfm.201504564 ↗
7. Boron doping of multiwalled carbon nanotubes significantly enhances hole extraction in carbon-based perovskite solar cells10.1021/acs.nanolett.7b00200 ↗
8. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
9. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
10. Planar-structure perovskite solar cells with efficiency beyond 21%10.1002/adma.201703852 ↗
11. 2017
12. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
13. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
14. Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
15. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
16. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
17. Full printable processed mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells with carbon counter electrode10.1038/srep03132 ↗
18. Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells10.1038/ncomms14555 ↗
19. Efficient hole-conductor-free, fully printable mesoscopic perovskite solar cells with carbon electrode based on ultrathin graphite10.1016/j.carbon.2017.05.027 ↗
20. Fully printable perovskite solar cells with highly-conductive, low-temperature, perovskite-compatible carbon electrode10.1016/j.carbon.2017.09.008 ↗
21. Stable monolithic hole-conductor-free perovskite solar cells using TiO2 nanoparticle binding carbon films10.1016/j.orgel.2017.03.005 ↗
22. Efficient and stable planar hole-transport-material-free perovskite solar cells using low temperature processed SnO2 as electron transport material10.1016/j.orgel.2017.12.002 ↗
23. Low-cost and Efficient Hole-Transport-Material-free perovskite solar cells employing controllable electron-transport layer based on P25 nanoparticles10.1016/j.electacta.2016.07.095 ↗
24. Efficient and stable hole-conductor-free mesoscopic perovskite solar cells using SiO2 as blocking layer10.1016/j.orgel.2018.04.008 ↗
25. Efficient, stable and flexible perovskite solar cells using two-step solution-processed SnO2 layers as electron-transport-material10.1016/j.orgel.2018.04.010 ↗
26. Retarding charge recombination in perovskite solar cells using ultrathin MgO-coated TiO2 nanoparticulate films10.1039/C4TA03684K ↗
27. W-doped TiO2 mesoporous electron transport layer for efficient hole transport material free perovskite solar cells employing carbon counter electrodes10.1016/j.jpowsour.2016.12.079 ↗
28. Hole selective NiO contact for efficient perovskite solar cells with carbon electrode10.1021/nl504701y ↗
29. Boosting the efficiency and the stability of low cost perovskite solar cells by using CuPc nanorods as hole transport material and carbon as counter electrode10.1016/j.nanoen.2015.11.034 ↗
30. Low-bandgap mixed tin-lead iodide perovskite absorbers with long Carrier lifetimes for all-perovskite tandem solar cells10.1038/nenergy.2017.18 ↗
31. Mixed-Organic-cation tin iodide for lead-free perovskite solar cells with an efficiency of 8.1210.1002/advs.201700204 ↗
32. Organic-Inorganic copper(II)-based material: a low-toxic, highly stable light absorber for photovoltaic application10.1021/acs.jpclett.7b00086 ↗
33. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
34. Irreversible light-soaking effect of perovskite solar cells caused by light-induced oxygen vacancies in titanium oxide10.1063/1.4994085 ↗
35. Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes10.1021/ja00067a063 ↗
36. Ionic transport in hybrid lead iodide perovskite solar cells10.1038/ncomms8497 ↗
37. Giant switchable photovoltaic effect in organometal trihalide perovskite devices10.1038/nmat4150 ↗
38. Degradation mechanisms of solution-processed planar perovskite solar cells: thermally stimulated current measurement for analysis of Carrier traps10.1002/adma.201502610 ↗
39. Multifunctional benzoquinone additive for efficient and stable planar perovskite solar cells10.1002/adma.201603808 ↗