journal article·2014-08

Metal evaporation dependent charge injection in organic transistors

Yong Xu, Chuan Liu, Huabin Sun, Francis Balestra, Gerard Ghibaudo, Will Scheideler, Yong-Young Noh

Organic Electronics· Volume 15· Issue 8
Publisher page

Abstract

To illuminate a long-term remaining issue on how contact metallization (metal and speed) affects charge injection, we investigated top-contact pentacene transistors using two categories of metals deposited at various rates. Differing from previous studies such as those devoted to morphological influences by microscopy, in this work we concentrated on their electrical characteristics in particular combining the low-frequency noise which provided a direct quantity of trap density and its evolution with respect to contact metal and deposition rate. It turns out that the transistors with noble metal (Au) suffer from metal-diffusion related charge trapping in the pentacene bulk close to the Au/pentacene interface, and this diffusion-limited injection is greatly tuned from bulk to interface by speeding Au deposition which leads to a Schottky-like injection due to the severe thermal damage to the upper pentacene layer. Applying a conventional contacting metal (Cu), however, Ohmic contacts with much fewer traps are always observed regardless of metallization speed. This is attributed to an ultra-thin interlayer of CuxO that guarantees stable Ohmic injection by introducing gap states and protecting the pentacene film so that those transistors appear to be free from Cu metallization. Our results quantitatively show the limiting factors of charge injection for different metals and at various evaporation rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Advanced Memory and Neural Computing · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Toward printed integrated circuits based on unipolar or ambipolar polymer semiconductors10.1002/adma.201205361 ↗
2. Solution-processable organic single crystals with bandlike transport in field-effect transistors10.1002/adma.201002682 ↗
3. Charge injection in solution-processed organic field-effect transistors: physics, models and characterization methods10.1002/adma.201104206 ↗
4. Chemistry and electronic properties of metal–organic semiconductor interfaces: Al, Ti, In, Sn, Ag, and Au on PTCDA10.1103/PhysRevB.54.13748 ↗
5. Role of metal-molecule chemistry and interdiffusion on the electrical properties of an organic interface: the Al–F16CuPc case10.1063/1.1419263 ↗
6. High-performance organic field-effect transistors with low-cost copper electrodes10.1002/adma.200701812 ↗
7. Chemistry, diffusion, and electronic properties of a metal/organic semiconductor contact: In/perylenetetracarboxylic dianhydride10.1063/1.116465 ↗
8. Gated four-probe measurements on pentacene thin-film transistors: contact resistance as a function of gate voltage and temperature10.1063/1.1806533 ↗
9. Effects of metal penetration into organic semiconductors on the electrical properties of organic thin film transistors10.1063/1.2357155 ↗
10. Morphology and thermal stability of metal contacts on crystalline organic thin films10.1002/1521-4095(20020705)14:13/14<961::AID-ADMA961>3.0.CO;2-X ↗
11. Conjugated organic molecules on metal versus polymer electrodes: demonstration of a key energy level alignment mechanism10.1063/1.1532102 ↗
12. Electronic structure symmetry of interfaces between pentacene and metals10.1063/1.1485129 ↗
13. Energy level alignment and interfacial electronic structures at organic metal and organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
14. Electronic structure, diffusion, and p-doping at the Au/F16CuPc interface10.1063/1.1406967 ↗
15. An experimental study of contact effects in organic thin film transistors10.1063/1.2215132 ↗
16. Diffusion of metals in polymers10.1016/S0927-796X(97)00020-X ↗
17. Thickness-dependent structural evolutions and growth models in relation to carrier transport properties in polycrystalline pentacene thin films10.1002/adfm.200700207 ↗
18. Critical impact of gate dielectric interfaces on the contact resistance of high-performance organic field-effect transistors10.1021/jp4023844 ↗
19. , Programmable Point Probe Noise Measuring System.
20. Direct evaluation of low-field mobility and access resistance in pentacene field-effect transistors10.1063/1.3432716 ↗
21. Direct extraction of mobility in pentacene OFETs using C–V and I–V measurements10.1109/LED.2005.854394 ↗
22. Detailed characterization of contact resistance, gate-bias-dependent field-effect mobility, and short-channel effects with microscale elastomeric single-crystal field-effect transistors10.1002/adfm.200801019 ↗
23. Contact resistance in organic transistors that use source and drain electrodes formed by soft contact lamination10.1063/1.1568157 ↗
24. Contact resistance in organic thin film transistors10.1063/1.1639937 ↗
25. Analysis of the contact resistance in staggered, top-gate organic field-effect transistors10.1063/1.2804288 ↗
26. Contact-metal dependent current injection in pentacene thin-film transistors10.1063/1.2813640 ↗
27. Origin of low-frequency noise in pentacene field-effect transistors10.1016/j.sse.2011.01.002 ↗
28. Measurement, analysis, and modeling of 1/f noise in pentacene thin film transistors10.1063/1.3622651 ↗
29. Extraction of low-frequency noise in contact resistance of organic field-effect transistors10.1063/1.3467057 ↗
30. Rhoderick · 1988
31. Band alignment at metal/organic and metal/oxide/organic interfaces10.1063/1.3030979 ↗
32. Morphology and interdiffusion behavior of evaporated metal films on crystalline diindenoperylene thin films10.1063/1.1556180 ↗
33. Charge injection process in organic field-effect transistors10.1063/1.2759987 ↗
34. Film and contact resistance in pentacene thin-film transistors: dependence on film thickness, electrode geometry, and correlation with hole mobility10.1063/1.2197033 ↗
35. Li · 2006
36. Lowering of operational voltage of organic electroluminescent devices by coating indium-tin-oxide electrodes with a thin CuOx layer10.1063/1.1469697 ↗