Investigating the influence of the solution-processing method on the morphological properties of organic semiconductor films and their impact on OLED performance and lifetime
Source abstract
Abstract
Abstract The morphological properties of organic semiconductor films deposited by blade coating and spin coating were investigated. The effect of these solution coating methods in fabricating the hole transport layer (HTL) and emissive layer (EML) of OLEDs was also examined. Transient photoluminescence measurements showed that blade-coated films have longer exciton lifetimes than spin-coated films, indicating that blade coating leads to films with less aggregated and more uniform morphologies. OLEDs with a blade-coated CBP:Ir(ppy)3 EML exhibited an external quantum efficiency (EQE) at 20 mA/cm2 of 8.6% versus 6.4% in case of device with the same structure but with a spin-coated EML. Additionally, the blade coated CBP:Ir(ppy)3-based device showed a decrease in electroluminescence emission peak by about 52% from its initial value after 20 min of electrical aging, whereas for the spin-coated device, the decrease was 74%. The higher efficiency and longer lifetime in the blade coated devices is likely a result of a more uniform or less aggregated film morphology. These findings demonstrate that blade coating is a promising solution-based fabrication technique to enable more efficient and longer-lived small molecule, solution-coated OLEDs and organic optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Flexible blade-coated multicolor polymer light-emitting diodes for optoelectronic sensors10.1002/adma.201606206 ↗
2. Large-area organic solar cells by accelerated blade coating10.1016/j.orgel.2015.03.001 ↗
3. Improving charge injection via a blade-coating molybdenum oxide layer: toward high-performance large-area quantum-dot light-emitting diodes10.1021/acsami.7b19333 ↗
4. Continuous blade coating for multi-layer large-area organic light-emitting diode and solar cell10.1063/1.3636398 ↗
5. Characteristics of solution-processed small-molecule organic films and light-emitting diodes compared with their vacuum-deposited counterparts10.1002/adfm.200801045 ↗
6. Solution processable small molecules for organic light-emitting diodes10.1039/b926348a ↗
7. The path to ubiquitous and low-cost organic electronic appliances on plastic10.1038/nature02498 ↗
8. Fabrication and processing of polymer solar cells : a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
9. Blade coating of Tris ( 8-hydroxyquinolinato) aluminum as the electron- transport layer for all-solution blue fluorescent organic light-emitting diodes10.1016/j.orgel.2015.10.026 ↗
10. Studies of spin-coated polymer films10.1039/b408857n ↗
11. All-small-molecule efficient white organic light-emitting diodes by multi-layer blade coating10.1016/j.orgel.2012.02.001 ↗
12. Multilayer polymer light-emitting diodes by blade coating method10.1063/1.2999541 ↗
13. General application of blade coating to small-molecule hosts for organic light-emitting diode10.1016/j.synthmet.2014.07.003 ↗
14. Stable and efficient blue fluorescent organic light-emitting diode by blade coating with or without electron-transport layer10.1016/j.orgel.2017.06.038 ↗
15. Unmodified small-molecule organic light-emitting diodes by blade coating10.1016/j.orgel.2012.05.017 ↗
16. All-solution-processed blue small molecular organic light-emitting diodes with multilayer device structure10.1016/j.orgel.2009.06.020 ↗
17. Great improvement of operation-lifetime for all-solution OLEDs with mixed hosts by blade coating10.1016/j.orgel.2016.12.003 ↗
18. Highly inverted rapid-drying blade-coated organic solar cells10.1016/j.orgel.2011.12.025 ↗
19. Fully coated semitransparent organic solar cells with a doctor blade-coated composite anode buffer layer of phosphomolybdic acid and PEDOT:PSS and a spray-coated silver nanowire top electrode10.1021/acsami.7b13346 ↗
20. Advantages and disadvantages of vacuum-deposited and spin-coated amorphous organic semiconductor films for organic light-emitting diodes10.1039/C5TC01911G ↗
21. Molecular packing and arrangement govern the photo-oxidative stability of organic photovoltaic materials10.1021/acs.chemmater.5b02341 ↗
22. The root causes of the limited stability of solution-coated small-molecule organic light-emitting devices: faster host aggregation by exciton-polaron interactions10.1002/adfm.201603542 ↗
23. Root causes of the limited electroluminescence stability of organic light-emitting devices made by solution-coating10.1021/acsami.8b00926 ↗
24. Increased electromer formation and charge trapping in solution-processed versus vacuum-deposited small molecule host materials of organic light-emitting devices10.1021/acsami.7b15190 ↗
25. Photostability can Be significantly modulated by molecular packing in glasses10.1021/jacs.6b06372 ↗
26. 12.88% efficiency in doctor-blade coated organic solar cells through optimizing the surface morphology of a ZnO cathode buffer layer10.1039/C8TA08873J ↗
27. Exciton–polaron-induced aggregation of wide-bandgap materials and its implication on the electroluminescence stability of phosphorescent organic light-emitting devices10.1002/adfm.201303840 ↗
28. Organic host materials for phosphorescent organic light-emitting diodes10.1039/c0cs00160k ↗
29. Effect of hole transporting materials on the emission characteristics of soluble processed organic light-emitting devices on the plastic substrate10.1080/15421406.2016.1277490 ↗
30. Exciton-induced degradation of carbazole-based host materials and its role in the electroluminescence spectral changes in phosphorescent organic light emitting devices with electrical aging10.1021/acsami.7b01432 ↗
31. Enhanced stability in inverted simplified phosphorescent organic light-emitting devices and its origin10.1016/j.orgel.2015.03.033 ↗
32. Degradation of PEDOT:PSS hole injection layers by electrons in organic light emitting devices10.1016/j.orgel.2019.03.009 ↗
33. Exciton‐induced degradation of hole transport layers and its effect on the efficiency and stability of phosphorescent organic light‐emitting devices10.1002/adom.201800923 ↗