journal article·2015-08

2,2-Dicyanovinyl-end-capped oligothiophenes as electron acceptor in solution processed bulk-heterojunction organic solar cells

Jianchang Wu, Yuchao Ma, Na Wu, Yi Lin, Jian Lin, Lilei Wang, Chang-Qi Ma

Publisher page

Abstract

Three 2,2-dicyanovinyl (DCV) end-capped A-pi-D-pi-A type oligothiophenes (DCV-OTs) containing dithieno[3,2-b: 2',3'-d] silole (DTSi), cyclopenta[1,2-b: 3,4-b'] dithiophene (DTCP) or dithieno[3,2-b: 2',3'-d] pyrrole (DTPy) unit as the central donor part, mono-thiophene as the pi-conjugation bridge were synthesized. The absorption spectroscopies, cyclic voltammetry of these compounds were characterized. Results showed that all these compounds have intensive absorption band over 500-680 nm with a LUMO energy level around -3.80 eV, which is slightly higher than that of [6,6] phenyl-C-61-butyric acid methyl ester (PC61BM, E-LUMO = -4.01 eV), but lower than that of poly(3-hexylthiophene) (P3HT, ELUMO = -2.91 eV). Solution processed bulk heterojunction "all-thiophene'' solar cells using P3HT as electron donor and the above mentioned oligothiophenes as electron acceptor were fabricated and tested. The highest power conversion efficiency (PCE) of 1.31% was achieved for DTSi-cored compound DTSi(THDCV) 2, whereas PTB7: DTSi(THDCV) 2 based device showed slightly higher PCE of 1.56%. Electron mobilities of these three compounds were measured to be around 10 (5) cm(2) V (1) s (1) by space charge limited current method, which is much lower than that of PC61BM, and was considered as one of the reason for the low photovoltaic performance. (C) 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Semiconducting polymers: the third generation10.1039/b914956m ↗
2. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
5. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
6. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
7. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
8. Molecular materials for organic photovoltaics: small is beautiful10.1002/adma.201305999 ↗
9. Charge injection and transport studies of poly(2,7-carbazole) copolymer PCDTBT and their relationship to solar cell performance10.1016/j.orgel.2012.01.030 ↗
10. Efficiency improvement of solution-processed dithienopyrrole-based A-D-A oligothiophene bulk-heterojunction solar cells by solvent vapor annealing10.1002/aenm.201400266 ↗
11. A narrow optical gap small molecule acceptor for organic solar cells10.1002/aenm.201200372 ↗
12. Ambipolar semiconducting polymers with π-spacer linked bis-benzothiadiazole blocks as strong accepting units10.1021/cm500800u ↗
13. Thieno[3,2-b]thiophene−diketopyrrolopyrrole-containing polymers for high-performance organic field-effect transistors and organic photovoltaic devices10.1021/ja110619k ↗
14. Effect of the fibrillar microstructure on the efficiency of high molecular weight diketopyrrolopyrrole-based polymer solar cells10.1002/adma.201304360 ↗
15. Synthesis and properties of acceptor–donor–acceptor molecules based on oligothiophenes with tunable and low band gap10.1016/j.tet.2009.04.089 ↗
16. Efficient solution processed bulk-heterojunction solar cells based a donor–acceptor oligothiophene10.1039/b925048d ↗
17. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
18. A molecular nematic liquid crystalline material for high-performance organic photovoltaics10.1038/ncomms7013 ↗
19. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
20. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
21. Efficient methano[70] fullerene/MDMO-PPV bulk heterojunction photovoltaic cells10.1002/anie.200351647 ↗
22. Organic non-fullerene acceptors for organic photovoltaics10.1039/c0ee00668h ↗
23. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
24. High mobility, air stable, organic single crystal transistors of an n-type diperylene bisimide10.1002/adma.201104987 ↗
25. Perylene diimide dimer-based acceptor material for highly efficient solution-processed non-fullerene organic solar cells with 4.03% efficiency10.1002/adma.201300897 ↗
26. Perylene diimides based materials for organic solar cells10.1016/j.dyepig.2013.01.020 ↗
27. Oligothiophene-functionalized naphthalimides and perylene imides: design, synthesis and applications10.1039/c2jm16690a ↗
28. Effect of core twisting on self-assembly and optical properties of perylene bisimide dyes in solution and columnar liquid crystalline phases10.1002/chem.200600891 ↗
29. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
30. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
31. Perylene-diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
32. A small molecule non-fullerene electron acceptor for organic solar cells10.1002/aenm.201000024 ↗
33. Rhodanine dye-based small molecule acceptors for organic photovoltaic cells10.1039/C4CC01695E ↗
34. A Rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics10.1021/ja5110602 ↗
35. High performance photovoltaic applications using solution-processed small molecules10.1021/ar400088c ↗
36. Efficiency improvement of solution-processed dithienopyrrole-based A-D-A oligothiophene bulk-heterojunction solar cells by solvent vapor annealing10.1002/aenm.201400266 ↗
37. Macrocyclic triphenylamine based organic dyes for efficient dye-sensitized solar cells10.1016/j.tet.2012.08.027 ↗
38. Dithienosilole-bridged small molecules with different alkyl group substituents for organic solar cells exhibiting high open-circuit voltage10.1039/c3ta11257h ↗
39. A new two-dimensional oligothiophene end-capped with alkyl cyanoacetate groups for highly efficient solution-processed organic solar cells10.1039/c3cc38920k ↗
40. Dithienopyrrole-based oligothiophenes for solution-processed organic solar cells10.1039/c3cc46066e ↗
41. Charge-transfer and energy-transfer processes in pi-conjugated oligomers and polymers: a molecular picture10.1021/cr040084k ↗
42. N. Wu, Q. Luo, Z. Bao, J. Lin, Y.-Q. Li, C.-Q. Ma, Zinc oxide-polymer nanocomposite as cathode buffer layer for high performance inverted organic solar cells, manuscript sumitted for Solar Energy Mater. Solar Cells.
43. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
44. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
45. Single crystals of polythiophene with different molecular conformations obtained by tetrahydrofuran vapor annealing and controlling solvent evaporation10.1021/jp911525d ↗
46. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
47. Polymer electronic materials: a review of charge transport10.1002/pi.2111 ↗
48. Molecular-weight-dependent mobilities in regioregular poly (3-hexyl-thiophene) diodes10.1063/1.1891301 ↗
49. A 3D star-shaped non-fullerene acceptor for solution-processed organic solar cells with a high open-circuit voltage of 1.18V10.1039/c2cc31511d ↗