journal article·2019-05

Enhancing device performance of inverted organic solar cells with SnO2/Cs2CO3 as dual electron transport layers

Van-Huong Tran, Seung Hun Eom, Sung Cheol Yoon, Sung-Kon Kim, Soo-Hyoung Lee

Publisher page

Abstract

Abstract Herein, we introduce for the first time that Cs2CO3 can work with SnO2 based on a facile low-temperature solution-processed as dual electron transport layers (ETL) for enhancing device performance of inverted organic solar cells (iOSCs). Aside from better morphologies, a lower work function of ETLs, and an efficient charge extraction, along with a much lower transport resistance at the interfaces are found for iOSCs using SnO2/Cs2CO3 rather than devices based on the SnO2 only. The iOSC devices with P3HT:PC60BM as an active layer, using SnO2/Cs2CO3 (0.5 mg/ml) as dual ETLs, achieved a champion power conversion efficiency (PCE) of 3.75%, which is >36% higher than that of only the based SnO2 (2.75%). Moreover, their PCEs remained at ∼94% of the initial values after storage for 4 weeks in ambient air without any encapsulations, thus demonstrating the excellent long-term device stability. Notably, for the PTB7-Th:PC70BM systems, we also achieved an impressive champion PCE of 7.78% with using SnO2/Cs2CO3 (0.5 mg/ml) as dual ETLs, meanwhile devices based on SnO2 only exhibited a humble PCE of 4.08%. We believe that SnO2/Cs2CO3 dual ETLs concept can also be applied to other optoelectronic devices such as perovskite solar cells or light-emitting diodes, where an ETL is required to ensure high efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Fundamentals of bulk heterojunction organic solar cells: an overview of stability/degradation issues and strategies for improvement10.1016/j.rser.2017.12.008 ↗
2. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
3. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
4. Long lifetime stable and efficient semitransparent organic solar cells using a ZnMgO-modified cathode combined with a thin MoO3/Ag anode10.1039/C6TA10981K ↗
5. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
6. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
7. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
8. Toward over 15% power conversion efficiency for organic solar cells: current status and perspectives10.1002/smtd.201700258 ↗
9. Polymer solar cells based on inkjet-printed PEDOT:PSS layer10.1016/j.orgel.2009.01.015 ↗
10. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
11. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
12. Inverted organic photovoltaic cells10.1039/C5CS00831J ↗
13. Polyfluorene electrolytes interfacial layer for efficient polymer solar cells: controllably interfacial dipoles by regulation of polar groups10.1021/acsami.6b00637 ↗
14. Polystyrene-block-poly(ionic liquid) copolymers as work function modifiers in inverted organic photovoltaic cells10.1021/acsami.7b17635 ↗
15. Small molecule interlayers in organic solar cells10.1002/aenm.201702730 ↗
16. Highly efficient polyacetylene–based polyelectrolytes as cathode interfacial layers for organic solar cell applications10.1016/j.orgel.2017.12.006 ↗
17. ITO modification for efficient inverted organic solar cells10.1021/acs.langmuir.7b01106 ↗
18. Metal oxides for optoelectronic applications10.1038/nmat4599 ↗
19. Colloidal metal oxide nanocrystals as charge transporting layers for solution-processed light-emitting diodes and solar cells10.1039/C6CS00122J ↗
20. Battery-supercapacitor hybrid devices: recent progress and future prospects10.1002/advs.201600539 ↗
21. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
22. Light-soaking issue in polymer solar cells: photoinduced energy level alignment at the sol-gel processed metal oxide and indium tin oxide interface10.1063/1.4728173 ↗
23. Avoiding photoinduced shunts in organic solar cells by the use of tin oxide (SnOx) as electron extraction material instead of ZnO10.1002/aenm.201600347 ↗
24. Recent advances in tin dioxide materials: some developments in thin films, nanowires, and nanorods10.1021/cr4007335 ↗
25. Room-temperature processed tin oxide thin film as effective hole blocking layer for planar perovskite solar cells10.1016/j.apsusc.2017.11.161 ↗
26. Efficient and stable planar hole-transport-material-free perovskite solar cells using low temperature processed SnO2 as electron transport material10.1016/j.orgel.2017.12.002 ↗
27. Tin oxide (SnOx) as universal “light-soaking” free electron extraction material for organic solar cells10.1002/aenm.201500277 ↗
28. Improved chemical stability of ITO transparent anodes with a SnO2 buffer layer for organic solar cells10.1016/j.solmat.2015.10.005 ↗
29. Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability10.1039/c2jm33445c ↗
30. Development of the morphology during functional stack build-up of P3HT:PCBM bulk heterojunction solar cells with inverted geometry10.1021/am5067749 ↗
31. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
32. Combination of titanium oxide and a conjugated polyelectrolyte for high-performance inverted-type organic optoelectronic devices10.1002/adma.201100266 ↗
33. Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers10.1038/ncomms9929 ↗
34. Overcoming electrode-induced losses in organic solar cells by tailoring a quasi-ohmic contact to fullerenes via solution-processed alkali hydroxide layers10.1002/aenm.201502195 ↗
35. Efficiency improved for inverted polymer solar cells with electrostatically self-assembled BenMeIm-Cl ionic liquid layer as cathode interface layer10.1016/j.nanoen.2015.02.032 ↗
36. Charge-carrier balance and color purity in polyfluorene polymer blends for blue light-emitting diodes10.1002/adfm.201101892 ↗
37. Properties of functional layers in inverted thin film organic solar cells10.1016/j.solmat.2016.10.036 ↗
38. Cesium compounds as interface modifiers for stable and efficient perovskite solar cells10.1016/j.solmat.2017.08.032 ↗
39. A study of tin oxide as an election injection layer in hybrid polymer light-emitting diodes10.1088/0268-1242/29/12/125002 ↗
40. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
41. Solution-processable metal oxides/chelates as electrode buffer layers for efficient and stable polymer solar cells10.1039/C4EE03802A ↗
42. Fabrication of tin oxide film by sol–gel method for photovoltaic solar cell system10.1016/S0927-0248(02)00201-5 ↗
43. Influences of surface roughness of ZnO electron transport layer on the photovoltaic performance of organic inverted solar cells10.1021/jp308480u ↗
44. Energetically favored formation of SnO2 nanocrystals as electron transfer layer in perovskite solar cells with high efficiency exceeding 19%10.1016/j.nanoen.2017.08.041 ↗
45. Low-temperature processed SnO2 compact layer for efficient mesostructure perovskite solar cells10.1016/j.apsusc.2016.06.187 ↗
46. XPS study of the L-CVD deposited SnO2 thin films exposed to oxygen and hydrogen10.1016/S0040-6090(01)00982-8 ↗
47. Cesium carbonate as a functional interlayer for polymer photovoltaic devices10.1063/1.2937202 ↗
48. Evaluation of the Tauc method for optical absorption edge determination: ZnO thin films as a model system10.1002/pssb.201552007 ↗
49. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
50. Fermi level, work function and vacuum level10.1039/C5MH00160A ↗
51. Hybrid solar cells: basic principles and the role of ligands10.1039/C1JM14829J ↗
52. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
53. Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy10.1039/c0cp02249g ↗
54. Electrical properties of the interfaces in bulk heterojunction organic solar cells investigated by electrochemical impedance spectroscopy10.1016/j.electacta.2013.07.152 ↗
55. Properties of interlayer for organic photovoltaics, Mater
56. Photoluminescence of oxygen vacancies and hydroxyl group surface functionalized SnO2 nanoparticles10.1039/C5CP00060B ↗
57. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
58. Towards reliable charge-mobility benchmark measurements for organic semiconductors10.1016/j.orgel.2014.02.008 ↗
59. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗