journal article·2017-09

On the reliability of determination of energies of HOMO levels in organic semiconducting polymers from electrochemical measurements

Juliusz Sworakowski, Krzysztof Janus

Publisher page

Abstract

Abstract Reliability of determination of energies of HOMO levels in semiconducting polymers by the cyclic voltammetry (CV) is assessed. Ionization energies (Ic) as determined by the UV photoelectron spectroscopy (UPS) reported in the literature for 33 polymers are correlated with their oxidation potentials (πox) as determined by CV. It is demonstrated that the resulting correlation does not obey the equation commonly used to derive the HOMO energies from the electrochemical measurements. The equation, best describing the obtained correlation, may be written as I c = ( 1.7 ± 0.2 ) × ( e π o x ) + ( 4.6 ± 0.1 ) eV . It should be noted that the slope of the correlation is much higher than the slope of an analogous correlation determined for small-molecule organic semiconductors. The accuracy of estimation of the energies of HOMO levels from CV experiments is of the order of 0.1 eV at the best.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. 1998
2. Pope · 1999
3. 2007
4. 2009
5. Köhler · 2015
6. Fundamental electronic structure of organic solids and their interfaces by photoemission spectroscopy and related methods, Ch. 7
7. Experimental characterization of interfaces of relevance to organic electronics, Ch. 6
8. Classical ultraviolet photoelectron spectroscopy of polymers10.1016/j.elspec.2009.03.024 ↗
9. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
10. Low-energy inverse photoemission spectroscopy using a high-resolution grating spectrometer in the near ultraviolet range10.1063/1.4822119 ↗
11. Principle and application of low energy inverse photoemission spectroscopy: a new method for measuring unoccupied states of organic semiconductors10.1016/j.elspec.2015.07.003 ↗
12. Cyclic voltammetry - “electrochemical spectroscopy”10.1002/anie.198408313 ↗
13. Bard · 2001
14. Recommendations on reporting electrode potentials in nonaqueous solvents10.1351/pac198456040461 ↗
15. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗
16. Relationship between the ionization and oxidation potentials of molecular organic semiconductors10.1016/j.orgel.2005.01.002 ↗
17. Measurement of the lowest unoccupied molecular orbital energies of molecular organic semiconductors10.1016/j.orgel.2008.12.011 ↗
18. Conjugated polymer energy level shifts in Lithium-ion battery electrolytes10.1021/am505416m ↗
19. On the reliability of determination of energies of HOMO and LUMO levels in organic semiconductors from electrochemical measurements. A simple picture based on the electrostatic model10.1016/j.orgel.2016.03.031 ↗
20. Photo- and semi-conductance in organic crystals. Part V: ionized states in molecular crystals10.1039/jr9570005001 ↗
21. Gutmann · 1967
22. Characterization of the polymer energy landscape in polymer:fullerene bulk heterojunctions with pure and mixed phases10.1021/ja505463r ↗
23. Cross-linkable molecular hole-transporting semiconductor for solid-state dye-sensitized solar cells10.1021/jp500489f ↗
24. Quantifying the extent of contact doping at the interface between high work function electrical contacts and poly(3-hexylthiophene) (P3HT)10.1021/acs.jpclett.5b00444 ↗
25. Investigation of a polythiophene interface using photoemission spectroscopy in combination with electrospray thin-film deposition10.1063/1.2172069 ↗
26. Effect of annealing on the electronic structure of poly(3-hexylthiophene) thin film10.1039/B914100F ↗
27. Surface-directed spinodal decomposition in poly[3-hexylthiophene] and C61-butyric acid methyl ester blends10.1021/nn102899g ↗
28. Orbital line-up at poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene vinylene] (MEH-PPV)/poly(3-hexylthiophene) (P3HT) heterojunction10.1063/1.4905502 ↗
29. Energetics at Au top and bottom contacts on conjugated polymers10.1063/1.2201627 ↗
30. Fermi-level pinning at conjugated polymer interfaces10.1063/1.2168515 ↗
31. Energy level alignment and morphology of interfaces between molecular and polymeric organic semiconductors10.1016/j.orgel.2007.04.010 ↗
32. Photoemission spectroscopy and atomic force microscopy investigation of vapor-phase codeposited silver/poly(3-hexylthiophene) composites10.1021/am900582w ↗
33. Direct determination of the electronic structure of the poly(3-hexylthiophene):phenyl-[6,6]-C61 butyric acid methyl ester blend10.1016/j.orgel.2010.07.023 ↗
34. Full electronic structure across a polymer heterojunction solar cell10.1039/c1jm14968g ↗
35. Temperature dependence of open-circuit voltage and UPS study for P3HT: PCBM organic solar cells10.1109/JPHOTOV.2012.2202877 ↗
36. Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices10.1038/nmat3026 ↗
37. Sputtered nickel oxide thin film for efficient hole transport layer in polymer–fullerene bulk-heterojunction organic solar cell10.1016/j.tsf.2011.10.059 ↗
38. Poly(3-hexylthiophene)/gold nanoparticle hybrid system with an enhanced photoresponse for light-controlled electronic devices10.1002/ppsc.201300005 ↗
39. Photoemission study of the poly(3-hexylthiophene)/TiO2 interface and the role of 4-mercaptopyridine10.1016/j.tsf.2013.11.045 ↗
40. Systematic electrochemical oxidative doping of P3HT to probe interfacial charge transfer across polymer–fullerene interfaces10.1039/C4TA04319G ↗
41. Energy level alignment in polymer organic solar cells at donor-acceptor planar junction formed by electrospray vacuum deposition10.1063/1.4873164 ↗
42. Investigations of efficiency improvements in poly(3-hexylthiophene) based organic solar cells using calcium cathodes10.1016/j.solmat.2011.07.036 ↗
43. Highly disordered polymer field effect transistors: N-alkyl dithieno[3,2-b:2′,3′-d]pyrrole-based copolymers with surprisingly high charge carrier mobilities10.1021/ja803077v ↗
44. Synthesis of poly(3-hexylthiophene) grafted TiO2 nanotube composite10.1016/j.jcis.2009.01.073 ↗
45. Electrochemical bandgaps of substituted polythiophenes10.1039/B301403G ↗
46. Considerations about the electrochemical estimation of the ionization potential of conducting polymers10.1007/s10008-002-0289-0 ↗
47. Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene
48. Design rules for donors in bulk-heterojunction solar cells - towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
49. Molecular weight dependent charge carrier mobility in Poly(3,3″-dioctyl-2,2′:5′,2″-terthiophene)10.1021/jp0624956 ↗
50. Influence of alkyl side-chain length on the performance of poly(3-alkylthiophene)/polyfluorene all-polymer solar cells10.1021/cm100189t ↗
51. Regioregular poly(3-alkanoylthiophene): synthesis and electrochemical, photophysical, charge transport, and photovoltaic properties10.1002/pola.24254 ↗
52. Synthesis and photovoltaic properties of ester group functionalized polythiophene derivatives10.1002/marc.201000711 ↗
53. Optoelectronic properties of hyperbranched polythiophenes10.1021/jp210822s ↗
54. Regioregularity and properties of the poly(3- hexylthiophene) synthesized by palladium catalyzed direct C-H arylation polycondensation under different reaction conditions10.1016/j.synthmet.2014.07.022 ↗
55. Engineering of energy levels for fully conjugated D-A block copolymers via tuning the ratios of donor P3HT and acceptor PNDIT10.1002/cjoc.201500257 ↗
56. Crystallization-induced energy level change of [6,6]-phenyl-C61- butyric acid methyl ester (PCBM) film: impact of electronic polarization energy10.1021/jp506296j ↗
57. The impact of inverse photoemission spectroscopy measurements on regioregular poly(3-hexylthiophene) films10.1063/1.4862327 ↗
58. Contribution to the theory of conducting-polymer electrodes in electrolyte solutions10.1039/ft9938900311 ↗
59. Polymer films on electrodes. Pt. III. Digital simulation model for cyclic voltammetry of electroactive polymer film and electrochemistry of poly(vinylferrocene) on platinum10.1016/S0022-0728(80)80438-4 ↗
60. Polymer-coated electrodes: cyclic voltammetry and chronoamperometry of non-ideal systems - the anodic oxidation of poly(4-vinyl-triphenylamine) films10.1007/BF01093759 ↗
61. Electrochemical characterization of electronically conductive polypyrrole on cyclic voltammograms10.1149/1.2085332 ↗
62. Numerical simulation of the cyclic voltammogram of polyacetylene10.1149/1.2049971 ↗
63. Effect of molecular weight on spectroscopic and spectroelectrochemical properties of regioregular poly(3-hexylthiophene)10.1021/ma970627a ↗
64. Thompson · 2005 · 59
65. Conversion constants for redox potentials measured versus different reference electrodes in acetonitrile solutions at 25°C10.1016/S0020-1693(99)00407-7 ↗
66. Electrochemical and optical studies of the band gaps of alternating polyfluorene copolymers10.1016/j.synthmet.2006.02.013 ↗
67. The cyclic voltammetry of pristine, isomerized, deuterated, and partially hydrogenated “p-type” polyacetylene10.1149/1.2100848 ↗
68. Electronic structure of polyenes and polyacetylene10.1016/0009-2614(78)85636-X ↗
69. Photoelectron spectra of AsF5-doped polyacetylenes10.1063/1.438595 ↗
70. Ultraviolet photoelectron spectroscopy of optically excited states in trans-polyacetylene10.1103/PhysRevLett.49.801 ↗
71. UPS of new type polyacetylene10.1016/0379-6779(91)91026-7 ↗
72. Spectral characteristic of metallic state of polyacetylene10.1016/0379-6779(93)90920-R ↗
73. Ultraviolet photoemission spectra of perchlorate-doped cis- and trans-polyacetylene10.1021/jp953793y ↗
74. Reversible electrochemical oxidation of (CH)x films10.1016/S0022-0728(80)80082-9 ↗
75. Electrochemistry of (CH)x lightweight rechargeable batteries using (CH)x as the cathode and anode-active materials10.1080/00268948208072181 ↗
76. Electrochemical characteristics of polyacetylene in organic electrolytes10.1016/0378-7753(85)88007-1 ↗
77. The electronic and electrochemical properties of poly(phenylene vinylenes) and poly(thienylene vinylenes): an experimental and theoretical study10.1063/1.457153 ↗
78. Intramolecular band mapping of poly(p-phenylene) via UV photoelectron spectroscopy of finite polyphenyls10.1016/0301-0104(84)80078-6 ↗
79. Electrochemical properties and photoelectrochemical response of vacuum-deposited poly(p-phenylene) thin films10.1002/(SICI)1099-1581(199608)7:8<657::AID-PAT571>3.0.CO;2-9 ↗
80. Electrosynthesis and optical characterization of poly(p-phenylene), polypyrrole and poly(p-phenylene)-polypyrrole Films10.1590/S1516-14392014005000008 ↗
81. Photoelectron spectroscopic study of the electronic band structure of polyfluorene and fluorene-arylamine copolymers at interfaces10.1021/jp067004w ↗
82. An experimental study of poly(9,9-dioctyl-fluorene) and its interfaces with Li, Al, and LiF10.1063/1.482056 ↗
83. G. Greczynski, Th. Kugler, W. R. Salaneck, Energy level alignment in organic-based three-layer structures studied by photoelectron spectroscopy. 88 (2000) 7187–7191.
84. Oxygen effect on the interface formation between calcium and a polyfluorene film10.1103/PhysRevB.62.10004 ↗
85. Interface formation between poly(9,9-dioctylfluorene) and Ca electrode investigated using photoelectron spectroscopy10.1016/S0009-2614(00)00722-3 ↗
86. Electronic structure and energy band gap of poly (9,9-dioctylfluorene) investigated by photoelectron spectroscopy10.1063/1.126713 ↗
87. Interface between poly (9,9-dioctylfluorene) and alkali metals: cesium, potassium, sodium, and lithium10.1116/1.1472419 ↗
88. Photoelectron spectroscopic studies of poly(9,9-dioctylfluorene)–potassium interface, and its influence by oxygen10.1016/S0379-6779(01)00670-1 ↗
89. Electronic structure of poly(9,9-dioctylfluorene) in the pristine and reduced state10.1063/1.1430694 ↗
90. Electrical doping of poly(9,9-dioctylfluorenyl-2,7-diyl) with tetrafluorotetracyanoquinodimethane by solution method10.1063/1.1895470 ↗
91. Interface formation between poly(9,9-dioctylfluorene) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid)10.1063/1.2456815 ↗
92. Electronic structure of hybrid interfaces for polymer-based electronics10.1088/0953-8984/19/18/183202 ↗
93. Formation of the interfacial dipole at organic-organic interfaces: C60/polymer interfaces10.1002/adma.200700622 ↗
94. Electrochemical determination of the ionization potential and electron affinity of poly(9,9-dioctylfluorene)10.1063/1.122479 ↗
95. Electrochemical and fluorescent properties of alternating copolymers of 9,9-dioctylfluorene and oxadiazole as blue electroluminescent and electron transport materials10.1088/1464-4258/4/6/365 ↗
96. Enhancement of color purity in blue-emitting fluorene–pyridine-based copolymers by controlling the chain rigidity and effective conjugation length10.1016/j.polymer.2003.11.052 ↗
97. Fluorene-based alternating polymers containing electron-withdrawing bithiazole units: preparation and device applications10.1002/pola.20659 ↗
98. Synthesis, photophysics, and electroluminescent performance of stable blue-light-emitting copoly(9,9-diarylfluorene)s10.1002/pola.23373 ↗
99. Thermally crosslinkable hole-transporting poly(fluorene-cotriphenylamine) for multilayer polymer light-emitting diodes10.1002/pola.24432 ↗
100. UV photoemission spectroscopy of poly(p-phenylene vinylene) (PPV)10.1016/0038-1098(90)90700-L ↗