Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system
Source abstract
Abstract
Abstract We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density ( −5 A/cm 2 at −2 V bias voltage) and photocurrent density (>5 × 10 −3 A/cm 2 at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Organic photovoltaics10.1039/b812502n ↗
2. Organic light detectors: photodiodes and phototransistors10.1002/adma.201204979 ↗
3. Vapor phase growth of functional pentacene films at atmospheric pressure10.1002/adfm.201200896 ↗
4. Multi-colour organic light-emitting displays by solution processing10.1038/nature01390 ↗
5. Precise pixel patterning of small molecule organic light-emitting devices by spin casting10.1016/j.orgel.2011.08.033 ↗
6. Red–green–blue polymer light-emitting diode pixels printed by optimized laser-induced forward transfer10.1063/1.4717463 ↗
7. Dry lithography of large-area, thin-film organic semiconductors using frozen CO(2) resists10.1002/adma.201202446 ↗
8. Orthogonal processing: a new strategy for organic electronics10.1039/c0sc00612b ↗
9. Origin of hole selectivity and the role of defects in low-temperature solution-processed molybdenum oxide interfacial layer for organic solar cells10.1021/jp303679y ↗
10. Surface and bulk leakage currents in high breakdown GaN rectifiers10.1016/S0038-1101(99)00196-3 ↗
11. Analysis of bulk and surface components of leakage current in 4H-SiC PiN MESA diodes10.1016/j.mee.2005.10.029 ↗
12. Perimeter leakage current in polymer light emitting diodes10.1016/j.cap.2008.03.018 ↗
13. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
14. Interface trap states in organic photodiodes10.1038/srep01324 ↗