journal article·2019-06

Cone-jet printing of aligned silver nanowire/poly(ethylene oxide) composite electrodes for organic thin-film transistors

Xinlin Li, Kyunghun Kim, Hwan Oh, Hong Chul Moon, Sooji Nam, Se Hyun Kim

Publisher page

Abstract

Abstract Aligned silver nanowire (AgNWs) conductive electrodes are printed through an electrohydrodynamic (EHD) jet printing via cone-jet mode. We investigate effects of poly(ethylene oxide) (PEO) addition to AgNW inks in terms of surface energy, ink viscosity, and electrical conductivity. The optimized PEO content in the ink is determined to be ∼10 wt%, at which well-defined AgNWs/PEO composite electrodes aligned along the printing direction can be prepared by cone-jet mode of EHD jet printing. We fabricate bottom contact organic thin film transistors (OTFTs) with TIPS-pentacene/PS blend as a semiconducting layer to take advantage of printed AgNWs/PEO electrodes. The resulting devices exhibit stable transfer characteristics for 12 h even in ambient air with average field-effect mobility (μFET), threshold voltage (Vth) and on/off current ratio (Ion/Ioff) of 0.51 cm2/V, −2.0 V, and ∼106, respectively. To understand the characteristics of OTFTs based on AgNWs/PEO composite electrodes in detail, we examine crystalline morphology and molecular orientation of TIPS-pentacene/PS blend on various substrates through field emission scanning electron microscopy and two-dimensional grazing incidence X-ray diffraction, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Ink-jet printing, self-assembled polyelectrolytes, and electroless plating: Low cost fabrication of circuits on a flexible substrate at room temperature10.1002/marc.200400462 ↗
2. Electrostatic-force-assisted dispensing printing of electrochromic gels for low-voltage displays10.1021/acsami.7b00946 ↗
3. Fabrication of low cost soft tissue prostheses with the desktop 3D printer10.1038/srep06973 ↗
4. Organic thin film transistor using silver electrodes by the ink-jet printing technology10.1016/j.tsf.2006.11.141 ↗
5. Creating perfused functional vascular channels using 3D bio-printing technology10.1016/j.biomaterials.2014.05.083 ↗
6. Macroscopic and high-throughput printing of aligned nanostructured polymer semiconductors for MHz large-area electronics10.1038/ncomms9394 ↗
7. All‐printed, foldable organic thin‐film transistors on glassine paper10.1002/adma.201503478 ↗
8. Fully screen-printed, large-area, and flexible active-matrix electrochromic displays using carbon nanotube thin-film transistors10.1021/acsnano.6b05368 ↗
9. Top-contact self-aligned printing for high-performance carbon nanotube thin-film transistors with sub-micron channel length10.1021/acsnano.6b08185 ↗
10. Solution-processable tin-doped indium oxide with a versatile patternability for transparent oxide thin film transistors10.1039/c1jm11418b ↗
11. All-printed flexible organic transistors enabled by surface tension-guided blade coating10.1002/adma.201401520 ↗
12. All-inkjet printed organic transistors: dielectric surface passivation techniques for improved operational stability and lifetime10.1016/j.microrel.2015.05.006 ↗
13. Direct writing of silver nanowire electrodes via dragging mode electrohydrodynamic jet printing for organic thin film transistors10.1016/j.orgel.2018.07.027 ↗
14. The effect of surfactants on electrohydrodynamic jet printing and the performance of organic field-effect transistors10.1039/C7CP06142K ↗
15. Nanocomposite “superhighways” by solution assembly of semiconductor nanostructures with ligand‐functionalized conjugated polymers10.1002/adma.201104788 ↗
16. Direct writing of microfluidic footpaths by pyro-EHD printing10.1021/acsami.7b02633 ↗
17. Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing10.1038/srep43924 ↗
18. Electrohydrodynamic drop-on-demand patterning in pulsed cone-jet mode at various frequencies10.1016/j.jaerosci.2008.05.001 ↗
19. Design optimization of ink in electrohydrodynamic jet printing: effect of viscoelasticity on the formation of taylor cone jet10.1016/j.matdes.2015.09.141 ↗
20. Electrostatic-force-assisted dispensing printing to construct high-aspect-ratio of 0.79 electrodes on a textured surface with improved adhesion and contact resistivity10.1038/srep16704 ↗
21. Direct patterning of conductive carbon nanotube/polystyrene sulfonate composites via electrohydrodynamic jet printing for use in organic field-effect transistors10.1039/C6TC01371F ↗
22. Electrospinning of polymer nanofibers: effects on oriented morphology, structures and tensile properties10.1016/j.compscitech.2010.01.010 ↗
23. Qualitative analysis of the minimum flow rate of a cone-jet of a very polar liquid10.1017/jfm.2017.111 ↗
24. Direct printing and electrical characterization of conductive micro-silver tracks by alternating current-pulse modulated electrohydrodynamic jet printing10.1115/1.4033903 ↗
25. Direct alignment and patterning of silver nanowires by electrohydrodynamic jet printing10.1002/smll.201400936 ↗
26. Studies on the mechanical stretchability of transparent conductive film based on graphene-metal nanowire structures10.1186/s11671-015-0748-z ↗
27. Ultra-thin and smooth transparent electrode for flexible and leakage-free organic light-emitting diodes10.1038/srep09464 ↗
28. Silver nanowire-embedded PDMS with a multiscale structure for a highly sensitive and robust flexible pressure sensor10.1039/C5NR00313J ↗
29. Preparation of transparent conducting films with improved haze characteristics using single-wall carbon nanotube-silver nanowire hybrid material10.1016/j.synthmet.2014.11.014 ↗
30. Invisible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing10.1088/0022-3727/46/15/155103 ↗
31. Organic thin-film transistors with sub-10-micrometer channel length with printed polymer/carbon nanotube electrodes10.1016/j.orgel.2017.10.023 ↗
32. High-speed organic transistors with three-dimensional organic channels and organic rectifiers based on them operating above 20 MHz10.1016/j.orgel.2015.02.005 ↗
33. Stencil nano lithography based on a nanoscale polymer shadow mask: Towards organic nanoelectronics10.1038/srep10220 ↗
34. Stencil lithography for organic thin-film transistors with a channel length of 300 nm10.1016/j.orgel.2018.06.053 ↗
35. Dielectric surface-polarity tuning and enhanced operation stability of solution-processed organic field-effect transistors10.1016/j.orgel.2014.11.022 ↗
36. Bias-induced threshold voltages shifts in thin-film organic transistors10.1063/1.1713035 ↗
37. Organic semiconductor growth and morphology considerations for organic thin-film transistors10.1002/adma.200903193 ↗
38. Ultrathin, organic, semiconductor/polymer blends by scanning corona-discharge coating for high-performance organic thin-film transistors10.1002/adfm.201000032 ↗
39. Effect of dielectric roughness on performance of pentacene TFTs and restoration of performance with a polymeric smoothing layer10.1021/jp044318f ↗
40. Gate dielectric microstructural control of pentacene film growth mode and field‐effect transistor performance10.1002/adma.200700101 ↗