journal article·2018-11

Direct writing of silver nanowire electrodes via dragging mode electrohydrodynamic jet printing for organic thin film transistors

Xinlin Li, Gyu Sung Lee, So Hyun Park, Hoyoul Kong, Tae Kyu An, Se Hyun Kim

Publisher page

Abstract

Abstract AgNWs-based electrodes were directly patterned using an electrohydrodynamic (EHD) jet printing technique. We investigated EHD jet printing for AgNWs ink in detail, and established the optimum printing conditions in dragging mode for controlling the dimensions and conductivity of the AgNWs network, although the cone-jet printing mode has been the most conventionally used mode for EHD jet printing. The printed AgNWs were used as source/drain (S/D) electrodes of an organic thin film transistor (OTFT) with bottom-contact geometry, and yielded an average field-effect mobility (μFET), threshold voltage (Vth) and on/off current ratio (Ion/Ioff) of 0.48 cm2/V, −11.2 V, and ∼106, respectively. In addition, we investigate the interface morphologies between pentacene and AgNWs S/D electrode to figure out charge carrier injection property of AgNWs S/D electrode, by comparing vacuum-deposited Au ones.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Nanomaterials and Printing Technologies · Innovative Microfluidic and Catalytic Techniques Innovation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Advanced desalination of dye/NaCl mixures by a loose nanofiltration membrane for digital ink-jet printing10.1016/j.seppur.2017.12.045 ↗
2. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
3. High performance printed N and P-type OTFTs enabling digital and analog complementary circuits on flexible plastic substrate10.1016/j.sse.2013.02.022 ↗
4. Fully printed and encapsulated SWCNT-based thin film transistors via a combination of R2R gravure and inkjet printing10.1021/acsami.6b06838 ↗
5. Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink10.1038/ncomms4935 ↗
6. Cost-effective three-dimensional printing of visibly transparent microchips within minutes10.1021/ac4041857 ↗
7. Effect of carbon nanotube addition on mechanical reliability of Ag nanowire network10.1016/j.matlet.2017.04.035 ↗
8. Flexible organic electronics in biology: materials and devices10.1002/adma.201402625 ↗
9. Flexible n-type thermoelectric materials by organic intercalation of layered transition metal dichalcogenide TiS210.1038/nmat4251 ↗
10. Stretchable and ultraflexible organic electronics10.1557/mrs.2016.325 ↗
11. Thermally stable, biocompatible, and flexible organic field-effect transistors and their application in temperature sensing arrays for artificial skin10.1002/adfm.201404535 ↗
12. Flexible and stretchable devices10.1002/adma.201601422 ↗
13. Flexible and stretchable microwave microelectronic devices and circuits10.1109/TED.2016.2646361 ↗
14. Large-scale flexible and highly conductive carbon transparent electrodes via roll-to-roll process and its high performance lab-scale indium tin oxide-free polymer solar cells10.1021/cm5033942 ↗
15. Nanoscale joule heating and electromigration enhanced ripening of silver nanowire contacts10.1021/nn4065567 ↗
16. Thin and long silver nanowires self-assembled in ionic liquids as a soft template: electrical and optical properties10.1186/1556-276X-9-330 ↗
17. Optimization of silver nanowire-based transparent electrodes: effects of density, size and thermal annealing10.1039/C5NR04084A ↗
18. Inkjet-printed transparent nanowire thin film features for UV photodetectors10.1039/C5RA12617G ↗
19. Direct printed silver nanowire thin film patterns for flexible transparent heaters with temperature gradients10.1039/C5RA19804F ↗
20. High performance organic transistors using small molecule semiconductors and high permittivity semiconducting polymers10.1002/adfm.201303336 ↗
21. Channel length variation in self-aligned, nanoimprint lithography structured OTFTs10.1016/j.orgel.2014.08.055 ↗
22. 3D hollow framework silver nanowire electrodes for high-performance bottom-contact organic transistors10.1021/acsami.5b02610 ↗
23. Highly robust silver nanowire network for transparent electrode10.1021/acsami.5b06540 ↗
24. Printed ion-gel transistor using electrohydrodynamic (EHD) jet printing process10.1016/j.orgel.2017.10.013 ↗
25. Electrostatic-force-assisted dispensing printing of electrochromic gels for low-voltage displays10.1021/acsami.7b00946 ↗
26. Direct patterning of conductive carbon nanotube/polystyrene sulfonate composites via electrohydrodynamic jet printing for use in organic field-effect transistors10.1039/C6TC01371F ↗
27. Qualitative analysis of the minimum flow rate of a cone-jet of a very polar liquid10.1017/jfm.2017.111 ↗
28. Direct printing and electrical characterization of conductive micro-silver tracks by alternating current-pulse modulated electrohydrodynamic jet printing10.1115/1.4033903 ↗
29. Black phosphorus terahertz photodetectors10.1002/adma.201502052 ↗
30. Ultrashort channel length black phosphorus field-effect transistors10.1021/acsnano.5b04036 ↗
31. Solution-processed organic-inorganic perovskite field-effect transistors with high hole mobilities10.1002/adma.201603126 ↗
32. Individually position-addressable metal-nanofiber electrodes for large-area electronics10.1002/adma.201403559 ↗
33. Rectifying electrical noise with an ionic-organic ratchet10.1002/adma.201404450 ↗
34. Efficient surface treatment to improve contact properties of inkjet-printed short-channel organic thin-film transistors10.1166/jnn.2017.14166 ↗
35. Effective enhancement of hydrophilicity of solution indium zinc oxide-based thin-film transistors by oxygen plasma treatment of deposition layer surface
36. Electrostatic-force-assisted dispensing printing to construct high-aspect-ratio of 0.79 electrodes on a textured surface with improved adhesion and contact resistivity10.1038/srep16704 ↗
37. First principle study on the electronic properties and Schottky contact of graphene adsorbed on MoS2 monolayer under applied out-plane strain10.1016/j.susc.2017.10.011 ↗
38. High performance of trench Schottky contact super barrier rectifier with a p-injector10.1109/TED.2017.2776164 ↗
39. High-performance chemical sensing using Schottky-Contacted chemical vapor deposition grown mono layer MoS2 transistors10.1021/nn5015215 ↗
40. Electrical characterization of Au/n-ZnO Schottky contacts on n-Si10.1016/j.jallcom.2008.09.131 ↗
41. On temperature-dependent experimental I-V and C-V data of Ni/n-GaN Schottky contacts10.1063/1.3517810 ↗
42. Low-voltage organic transistors based on tetraceno[2,3-b]thiophene: contact resistance and air stability10.1021/cm5043183 ↗
43. Contact resistance and contact resistivity10.1149/1.2404240 ↗