Parylene based bilayer flexible gate dielectric layer for top-gated organic field-effect transistors
Source abstract
Abstract
Abstract In this paper, we report on a bilayer insulating film based on parylene-c for gate dielectric layers in top-gate/bottom-contact inkjet-printed organic field-effect transistors (OFETs) with indacenodithiophene-co-benzothiadiazole (IDTBT) and poly([N,N’-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5’-(2,2’-bitthiophene)) (P(NDI2OD-T2)) as with p- and n- channel semiconductors. The thin parylene-c film (t = 210 nm) show large gate leakage density (2.52 nA/cm 2 at 25 V) and low breakdown voltage (2.2 MV/cm). In addition, a degraded field-effect mobility (μ) was observed in printed IDTBT and P(NDI2OD-T2) OFETs with the parylene-c single-layered dielectric. X-ray photoelectron spectroscopy (XPS) analysis reveals that the degradation of μ is due to unwanted chemical interaction between parylene-c and the conjugated polymer surface during the parylene-c deposition process. By inserting 50-nm thick poly(methyl-methacrylate) (PMMA) and polystyrene (PS) layer in-between the parylene-c and conjugated polymer film, highly improved gate leakage density and breakdown voltage are achieved. The printed IDTBT and P(NDI2OD-T2) OFETs with a bilayer dielectric compose of parylene-c and PMMA and PS show significantly improved hole and electron μ of 0.47 cm 2 /Vs and 0.13 cm 2 /Vs, respectively, and better operation stability. In addition, we demonstrate inkjet-printed polymer complementary inverter with a high voltage gain of 25.7 by applying a PS/parylene-c bilayer dielectric.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Advanced Memory and Neural Computing · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Device physics of solution-processed organic field-effect transistors10.1002/adma.200501152 ↗
2. Toward printed integrated circuits based on unipolar or ambipolar polymer semiconductors10.1002/adma.201205361 ↗
3. Fully-printed high-performance organic thin-film transistors and circuitry on one-micron-thick polymer films10.1038/ncomms5147 ↗
4. Gate dielectrics for organic field-effect transistors: new opportunities for organic electronics10.1002/adma.200500517 ↗
5. High-K organic, inorganic, and hybrid dielectrics for low-voltage organic field-effect transistors10.1021/cr9001275 ↗
6. Correlation of growth and surface properties of poly(p-xylylenes) to reaction conditions10.3390/coatings5020142 ↗
7. Characterization of Parylene-N and Parylene-C photooxidation10.1002/pola.10681 ↗
8. Effects of film thickness on moisture sorption, glass transition temperature and morphology of poly(chloro-p-xylylene) film10.1016/j.polymer.2005.05.076 ↗
9. Mechanical and electrical evaluation of parylene-C encapsulated carbon nanotube networks on a flexible substrate10.1063/1.2976633 ↗
10. Preparation and properties of thin parylene layers as the gate dielectrics for organic field effect transistors10.1016/j.mejo.2008.06.029 ↗
11. Influence of the gate dielectric on the mobility of rubrene single-crystal field-effect transistors10.1063/1.1812368 ↗
12. Influence of the polymer dielectric characteristics on the performance of a quaterthiophene organic field-effect transistor10.1007/s10853-005-2331-y ↗
13. Applications of parylene films in the manufacture of organic field-effect transistors10.1016/j.surfcoat.2015.08.058 ↗
14. Reverse DC bias stress shifts in organic thin-film transistors with gate dielectrics using parylene-C10.1002/pssa.201228219 ↗
15. Flexible picene thin film field-effect transistors with parylene gate dielectric and their physical properties10.1063/1.3360223 ↗
16. Graphene field effect transistors with parylene gate dielectric10.1063/1.3273396 ↗
17. Field-effect transistors on rubrene single crystals with parylene gate insulator10.1063/1.1560869 ↗
18. Remarkable enhancement of hole transport in top-gated N-type polymer field-effect transistors by a high-k dielectric for ambipolar electronic circuits10.1002/adma.201201464 ↗
19. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
20. Hierarchical polymer patterns driven by capillary instabilities at mobile and corrugated polymer–polymer interfaces10.1039/c0sm00392a ↗
21. Designing organic and inorganic ambipolar thin-film transistors and inverters: theory and experiment10.1016/j.orgel.2012.08.038 ↗
22. Cross-linked polymer-blend gate dielectrics through thermal click chemistry10.1002/chem.201502825 ↗
23. From monolayer to multilayer N-channel polymeric field-effect transistors with precise conformational order10.1002/adma.201103800 ↗
24. Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate)10.1039/B512799H ↗
25. XPS analysis of new lithium cobalt oxide thin-films before and after lithium deintercalation10.1016/S0040-6090(00)01802-2 ↗
26. XPS in development of chemical sensors10.1039/C5RA14139G ↗
27. Anthracenedicarboximides as air-stable N-Channel semiconductors for thin-film transistors with remarkable current on-off ratios10.1021/ja073306f ↗
28. Gate dielectric chemical structure-organic field-effect transistor performance correlations for electron, hole, and ambipolar organic semiconductors10.1021/ja063290d ↗
29. Controlled charge transport by polymer blend dielectrics in top-gate organic field-effect transistors for low-voltage-operating complementary circuits10.1021/am301793m ↗