Unified drain-current model of complementary p- and n-type OTFTs
Source abstract
Abstract
A unified drain current model of complementary (p- and n-type) organic thin film transistors (OTFTs) is presented. The model is physically based and takes into account the detailed properties of the organic semiconductor through the density of states (DOS). The drain current depends on the geometrical and physical parameters of the transistor, on the applied gate, drain and source voltages, and on the surface potential at the source and drain contacts. An analytical expression of the surface potential is derived. The proposed model is validated with the numerical calculations and the measurements of both p- and n-type OTFTs fabricated in a printed complementary technology. The provided analyses show that the model is continuous, accurate, and includes the main physical effects taking place in complementary organic transistors. Thanks to its analytical and symmetric formulation, it is suitable for the design of organic integrated circuits. Moreover, the unified physical picture provided by the model enables the extraction of the OTFTs physical parameters, thus it is a very powerful tool for the technology characterization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
2. Flexible organic transistors and circuits with extreme bending stability10.1038/nmat2896 ↗
3. Low-voltage, low-power, organic light-emitting transistors for active matrix displays10.1126/science.1203052 ↗
4. Chemical and physical sensing by organic field-effect transistors and related devices10.1002/adma.200902760 ↗
5. X-ray imager using solution processed organic transistor arrays and bulk heterojunction photodiodes on thin, flexible plastic substrate10.1016/j.orgel.2013.06.020 ↗
6. An ultra-lightweight design for imperceptible plastic electronics10.1038/nature12314 ↗
7. Design and realization of a flexible QQVGA AMOLED display with organic TFTs10.1016/j.orgel.2012.05.034 ↗
8. A printed OTFT-backplane for AMOLED display10.1016/j.orgel.2013.02.006 ↗
9. A 13.56-MHz RFID system based on organic transponders10.1109/JSSC.2006.886556 ↗
10. Organic RFID transponder chip with data rate compatible with electronic product coding10.1016/j.orgel.2010.04.013 ↗
11. High-gain fully printed organic complementary circuits on flexible plastic foils10.1109/TED.2011.2162071 ↗
12. Complementary integrated circuits on plastic foil using inkjet printed n- and p-type organic semiconductors: fabrication, characterization, and circuit analysis10.1016/j.orgel.2012.05.022 ↗
13. Integrated circuits using fully solution-processed organic TFT devices with printed silver electrodes10.1016/j.orgel.2013.10.006 ↗
14. High performance printed N and P-type OTFTs enabling digital and analog complementary circuits on flexible plastic substrate10.1016/j.sse.2013.02.022 ↗
15. Impact of energetic disorder and localization on the conductivity and mobility of organic semiconductors
16. Charge transport in dual-gate organic field-effect transistors10.1063/1.3677676 ↗
17. Morphology optimization for achieving air stable and high performance organic field effect transistors10.1016/j.orgel.2013.03.027 ↗
18. Effective mobility in amorphous organic transistors: influence of the width of the density of states10.1016/j.orgel.2013.10.002 ↗
19. Direct determination of the hole density of states in undoped and doped amorphous organic films with high lateral resolution10.1103/PhysRevLett.95.256405 ↗
20. The role of the density of states on the hole mobility of disordered organic semiconductors10.1016/j.orgel.2009.05.013 ↗
21. Density of-states in pentacene from the electrical characteristics of thin-film transistors10.1016/j.orgel.2010.05.007 ↗
22. N-type PTCDI–C13H27 thin-film transistors deposited at different substrate temperature10.1016/j.tsf.2009.02.113 ↗
23. Accurate description of charge transport in organic field effect transistors using an experimentally extracted density of states10.1103/PhysRevB.85.085202 ↗
24. Theory of the field-effect mobility in amorphous organic transistors10.1103/PhysRevB.57.12964 ↗
25. A charge control analytical model for organic thin film transistors10.1063/1.2898400 ↗
26. Compact model for forward subthreshold characteristics in polymer semiconductor transistors10.1063/1.3233927 ↗
27. Analysis of electrical characteristics of high performance pentacene thin-film transistors with PMMA buffer layer10.1016/j.jnoncrysol.2005.11.123 ↗
28. Extraction of the sub-bandgap density-of-states in polymer thin-film transistors with the multi-frequency capacitance-voltage spectroscopy10.1063/1.3698455 ↗
29. Charge transport and density of trap states in balanced high mobility ambipolar organic thin-film transistors10.1016/j.orgel.2011.10.003 ↗
30. An analytical model for organic-based thin-film transistors10.1063/1.350250 ↗
31. An analytical model for short-channel organic thin-film transistors10.1063/1.360341 ↗
32. Electronic transport in field-effect transistors of sexithiophene10.1063/1.1789279 ↗
33. Organic thin film transistors: a DC/Dynamic model for circuit simulation10.1016/j.sse.2005.01.006 ↗
34. A charge-based OTFT model for circuit simulation10.1109/TED.2008.2007717 ↗
35. Analytical model of trapping effects in organic thin-film transistors10.1109/TED.2008.2011936 ↗
36. Charge transport in organic transistors accounting for a wide distribution of carrier energies – Part II: TFT Modeling10.1109/TED.2012.2184764 ↗
37. Modeling of organic thin film transistors of different designs10.1063/1.1323534 ↗
38. A closed-form DC model for long-channel thin-film transistors with gate voltage-dependent mobility characteristics10.1016/j.sse.2004.12.009 ↗
39. Accurate modeling and parameter extraction method for organic TFTs10.1016/j.sse.2005.02.004 ↗
40. Modeling and characterization of organic thin film transistors for circuit design10.1063/1.2197260 ↗
41. Mobility model for compact device modeling of OTFTs made with different materials10.1016/j.sse.2007.11.007 ↗
42. SPICE optimization of organic FET models using charge transport elements10.1109/TED.2008.2008164 ↗
43. Organic thin-film transistors: Part I—compact DC modeling10.1109/TED.2009.2033308 ↗
44. Design and modeling of self-aligned nano-imprinted sub-micrometer pentacene-based organic thin-film transistors10.1016/j.orgel.2013.07.035 ↗
45. Compact DC modeling of organic field-effect transistors: review and perspectives10.1109/TED.2013.2281054 ↗
46. S. Jacob, M. Benwadih, J. Bablet, I. Chartier, R. Gwoziecki, S. Abdinia, E. Cantatore, L. Maddiona, F. Tramontana, G. Maiellaro, L. Mariucci, G. Palmisano, R. Coppard, High performance printed N and P-type OTFTs for complementary circuits on plastic substrate, 42nd European Solid-State Device Research Conference, 2012, pp. 173–176.10.1109/ESSDERC.2012.6343361 ↗
47. New procedure for the extraction of basic a-Si: H TFT model parameters in the linear and saturation regions10.1016/S0038-1101(01)00143-5 ↗
48. Charge transport in organic transistors accounting for a wide distribution of carrier energies – Part I: theory10.1109/TED.2012.2187830 ↗
49. Static and dynamic analysis of amorphous-silicon field-effect transistors10.1016/0038-1101(86)90197-8 ↗
50. An analytical a-Si: H TFT DC/capacitance model using an effective temperature approach for deriving a switching time model for an inverter circuit considering deep and tail states10.1109/16.293344 ↗
51. Contact effects in high performance fully printed p-channel organic thin film transistors10.1063/1.3669701 ↗
52. Gate-bias assisted charge injection in organic field-effect transistors10.1016/j.orgel.2012.04.029 ↗
53. Analysis of contact effects in fully printed p-channel organic thin film transistors10.1016/j.orgel.2012.06.003 ↗
54. Current spreading effects in fully printed p-channel organic thin film transistors with Schottky source-drain contacts10.1016/j.orgel.2012.10.002 ↗
55. Analytical modeling of the contact resistance in top gate/bottom contacts organic thin film transistors10.1016/j.orgel.2011.03.007 ↗
56. F. Torricelli, E. Cantatore, A. Valletta, S. Jacob, M. Benwadih, R. Coppard, G. Fortunato, M. Rapisarda, L. Mariucci, Physically-based compact model of staggered p- and n-type Organic Thin-Film Transistors, 8th International Thin-Film Transistor Conference, Lisbon – Portugal, 2012, p. 116.
57. Variation-based design of an AM demodulator in a printed complementary organic technology10.1016/j.orgel.2014.01.021 ↗
58. Compact modeling and contact effects in thin film transistors10.1109/TED.2013.2282994 ↗
59. Single-transistor method for the extraction of the contact and channel resistances in organic field-effect transistors10.1063/1.4868042 ↗
60. High-mobility polymer gate dielectric pentacene thin film transistors10.1063/1.1511826 ↗
61. Low-k insulators as the choice of dielectric in organic field-effect transistors10.1002/adfm.200390030 ↗