journal article·2019-12

Engineering of perovskite light-emitting diodes based on quasi-2D perovskites formed by diamine cations

Chiung-Han Chen, Zhenchao Li, Qifan Xue, Yu-An Su, Chia-Chen Lee, Hin-Lap Yip, Wen-Chang Chen, Chu-Chen Chueh

Publisher page

Abstract

Abstract Thus far, most of the layered quasi-2D perovskite materials exploited in the perovskite light-emitting diodes (PeLEDs) are based on large-size monoamine cations, which forms a bilayered organic barrier between the perovskite sheets (known as the Ruddlesden-Popper (RP) phase). However, the organic spacer between the perovskite sheets can be composed of a single-layer diamine cation, for which the perovskite sheets might possess a strengthened connection due to the direct linkage of the diamine cation (referred as the Dion-Jacobson (DJ) phase). Until now, the studies of PeLEDs based on the DJ phase 2D perovskite materials are still rare. Herein, a series of DJ phase quasi-2D EDBE(MAPbBr3)n-1PbBr4 perovskites [EDBE: 2,2-(ethylenedioxy)bis(ethylammonium)] is developed and their application in PeLEDs is investigated. Interestingly, different to the broad emission of the 2D EDBEPbBr4 film, the quasi-2D film exhibited a narrow emission, indicating a decreased lattice torsion and trap states. After careful device engineering, a green light-emitting perovskite LED based on the EDBE(MAPbBr3)2PbBr4 film is demonstrated to deliver a maximum luminescence of 1903 cd m−2 and a maximum EQE of 1.06%. We note such performance is inferior to the existing RP phase 2D perovskite, which is limited by the poor thermal stability of the studied EDBE-based 2D perovskites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Hybrid organic—inorganic perovskites: low-cost semiconductors with intriguing charge-transport properties10.1038/natrevmats.2015.7 ↗
2. Organic–inorganic perovskites: structural versatility for functional materials design10.1021/acs.chemrev.5b00715 ↗
3. Perovskite materials for light-emitting diodes and lasers10.1002/adma.201600669 ↗
4. Metal halide perovskite light emitters10.1073/pnas.1607471113 ↗
5. Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications10.1039/C4CS00458B ↗
6. The renaissance of halide perovskites and their evolution as emerging semiconductors10.1021/acs.accounts.5b00229 ↗
7. Chemically diverse and multifunctional hybrid organic–inorganic perovskites10.1038/natrevmats.2016.99 ↗
8. Low-dimensional-networked metal halide perovskites: the next big thing10.1021/acsenergylett.6b00705 ↗
9. Two-dimensional materials for halide perovskite-based optoelectronic devices10.1002/adma.201605448 ↗
10. 2D Ruddlesden–Popper perovskites for optoelectronics10.1002/adma.201703487 ↗
11. The rapid evolution of highly efficient perovskite solar cells10.1039/C6EE03397K ↗
12. High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells10.1038/nature18306 ↗
13. Multidimensional perovskites: a mixed cation approach towards ambient stable and tunable perovskite photovoltaics10.1002/cssc.201601025 ↗
14. Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering10.1039/c001929a ↗
15. Confinement effects in low-dimensional lead iodide perovskite hybrids10.1021/acs.chemmater.6b00809 ↗
16. Perovskite quantum dots and their application in light-emitting diodes10.1002/smll.201702433 ↗
17. High performance metal halide perovskite light-emitting diode: from material design to device optimization10.1002/smll.201701770 ↗
18. High‐performance color‐tunable perovskite light emitting devices through structural modulation from bulk to layered film10.1002/adma.201603157 ↗
19. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation10.1038/s41467-018-02978-7 ↗
20. Efficient visible quasi‐2D perovskite light‐emitting diodes10.1002/adma.201601369 ↗
21. Perovskite energy funnels for efficient light-emitting diodes
22. High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells10.1038/nature18306 ↗
23. Ruddlesden–Popper hybrid lead iodide perovskite 2D homologous semiconductors10.1021/acs.chemmater.6b00847 ↗
24. A layered hybrid perovskite solar‐cell absorber with enhanced moisture stability10.1002/ange.201406466 ↗
25. 2D homologous perovskites as light-absorbing materials for solar cell applications10.1021/jacs.5b03796 ↗
26. Highly efficient spectrally stable red perovskite light‐emitting diodes10.1002/adma.201707093 ↗
27. Hybrid Dion–Jacobson 2D lead iodide perovskites10.1021/jacs.8b00542 ↗
28. Nouvelles familles de phases MIMII2Nb3O10 a feuillets “perovskites”10.1016/0025-5408(81)90063-5 ↗
29. New Dion–Jacobson phase three-layer perovskite CsBa2Ta3O10 and its conversion to nitrided Ba2Ta3O10 nanosheets via a nitridation–protonation–intercalation–exfoliation route for water splitting10.1021/acs.cgd.6b00081 ↗
30. Intrinsic white-light emission from layered hybrid perovskites10.1021/ja507086b ↗
31. Improving performance of Cs-based perovskite light-emitting diodes by dual additives consisting of polar polymer and n-type small molecule10.1016/j.orgel.2018.12.042 ↗
32. Dion-Jacobson phase 2D layered perovskites for solar cells with ultrahigh stability10.1016/j.joule.2018.11.026 ↗
33. Facile synthesis of two-dimensional Ruddlesden-Popper perovskite quantum dots with fine-tunable optical properties10.1186/s11671-018-2664-5 ↗
34. High efficiency and high open circuit voltage in quasi 2D perovskite based solar cells10.1002/adfm.201604733 ↗
35. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum
36. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
37. High-efficiency light-emitting diodes of organometal halide perovskite amorphous nanoparticles10.1021/acsnano.6b01540 ↗
38. interfaces, Emulsion synthesis of size-tunable CH3NH3PbBr3 quantum dots: an alternative route toward efficient light-emitting diodes10.1021/acsami.5b10373 ↗
39. All‐solution‐processed pure formamidinium‐based perovskite light‐emitting diodes10.1002/adma.201804137 ↗
40. Methanol treatment on low-conductive PEDOT: PSS to enhance the PLED's performance10.1016/j.orgel.2015.10.039 ↗
41. Efficient low‐temperature solution‐processed lead‐free perovskite infrared light‐emitting diodes10.1002/adma.201601024 ↗
42. Enhanced optical and electrical properties of polymer‐assisted all‐inorganic perovskites for light‐emitting diodes10.1002/adma.201602513 ↗
43. Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures10.1038/s41586-018-0576-2 ↗
44. Improving the stability and performance of perovskite light‐emitting diodes by thermal annealing treatment10.1002/adma.201601105 ↗
45. Thermally activated delayed fluorescence OLEDs with fully solution processed organic layers exhibiting nearly 10% external quantum efficiency10.1039/C6CC09275F ↗
46. Solution-processed, high-performance light-emitting diodes based on quantum dots10.1038/nature13829 ↗
47. Solution processable small molecules for organic light-emitting diodes
48. Quantum dot light‐emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3)10.1002/adma.201502567 ↗
49. Luminous butterflies: efficient exciton harvesting by benzophenone derivatives for full‐color delayed fluorescence OLEDs10.1002/anie.201402992 ↗
50. Color tuning in benzo [1, 2, 5] thiadiazole‐based small molecules by amino conjugation/deconjugation: bright red‐light‐emitting diodes10.1002/adfm.200304486 ↗
51. De novo design of silicon‐bridged molecule towards a bipolar host: all‐phosphor white organic light‐emitting devices exhibiting high efficiency and low efficiency roll‐off10.1002/adma.201002732 ↗