journal article·2019-02Open access

Facile fabrication of large area oriented conjugated polymer films by ribbon-shaped FTM and its implication on anisotropic charge transport

Atul S.M. Tripathi, Nikita Kumari, Shuichi Nagamatsu, Shuzi Hayase, Shyam S. Pandey

Abstract

Facile fabrication of large area [20cm (L) × 2cm (W)] uniform and oriented thin films of a variety of conjugated polymers (CPs) with minimal material wastage has been successfully demonstrated using our newly developed ribbon-shaped floating film transfer method (FTM). Under identical film fabrication conditions of FTM like hydrophilic liquid substrate consisted of ethylene glycol and glycerol (3:1), the temperature of 60°C and polymer concentration 1% (w/w) in chloroform, order of molecular orientation was found to be PQT-C12 > F8T2 > NR-P3HT > PBTTT-C14 > PTB7. Depending on the nature of polymeric backbone, CPs exhibited different optical anisotropies in their oriented thin films, which was explained in terms of nature and rigidity of polymeric chains in the light of persistent length. Organic field effect transistors fabricated using these CPs exhibited clear p-type behaviour and anisotropic charge transport. Amongst various CPs used, PQT-C12 not only exhibited the highest optical anisotropy (DR = 5.1) but also highest anisotropic charge transport (μ||/μ⊥ = 7.1). Ribbon-shaped thin films of PQT-C12 prepared by slider based FTM exhibited best device performance with charge carrier mobility of 5.0 × 10−2 cm2/V and ON/OFF ratio of 106, when films were oriented parallel to the channel direction. Interestingly, a mobility of parallel oriented thin films prepared by FTM was about two orders of magnitude higher compared to the OFETs fabricated using conventional spin coating (6.7× 10−4 cm2/V).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. 25th anniversary article: organic field-effect transistors: the path beyond amorphous silicon10.1002/adma.201304346 ↗
2. π-Conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
3. The first regioregular head-to-tail poly(3- hexylthiophene-2,5-diyl) and a regiorandom isopolymer: nickel versus palladium catalysis of 2(5)-bromo-5(2)-(bromozincio)-3-hexylthiophene polymerization10.1021/ja00051a066 ↗
4. A photoluminescence study of poly(phenylene vinylene) derivatives: the effect of intrinsic persistence length
5. NEXAFS spectroscopy reveals the molecular orientation in blade-coated pyridal[2,1,3]thiadiazole-containing conjugated polymer thin films10.1021/acs.macromol.5b01647 ↗
6. Youn · Energy Technol. · 2015 · 3 · 34010.1002/ente.201402163 ↗
7. Uniaxial macroscopic alignment of conjugated polymer systems by directional crystallization during blade coating10.1039/C3TC32056A ↗
8. Polarized luminescence from oriented molecular materials10.1002/(SICI)1521-4095(199908)11:11<895::AID-ADMA895>3.0.CO;2-Y ↗
9. Anisotropic charge transport in spherulitic poly(3-hexylthiophene) films10.1002/adma.201104284 ↗
10. Orienting semi- conducting π-conjugated polymers10.1002/marc.201300712 ↗
11. Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase10.1063/1.126991 ↗
12. Sensitivity organic phototransistors prepared by floating film transfer method
13. Backbone arrangement in “friction-transferred” regioregular poly(3-alkylthiophene)s10.1021/ma025887t ↗
14. Large scale alignment and charge transport anisotropy of pBTTT films oriented by high temperature rubbing10.1021/ma400516d ↗
15. Polymer field-effect transistors by a drawing method10.1063/1.1751222 ↗
16. Solution flow assisted fabrication method of oriented p-conjugated polymer films by using geometrically-asymmetric sandwich structures10.7567/JJAP.50.020205 ↗
17. Anisotropic structure and charge transport in highly strain-aligned regioregular poly(3-hexylthiophene)10.1002/adfm.201100904 ↗
18. Enhanced mobility of poly(3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents10.1021/cm049617w ↗
19. Solubility-driven thin film structures of regioregular poly(3-hexyl thiophene) using volatile solvents10.1063/1.2734387 ↗
20. Solvent driven performance in thin floating-films of PBTTT for organic field effect transistor: role of macroscopic orientation10.1016/j.orgel.2017.01.031 ↗
21. Enhancement of transport characteristics in poly(3-hexylthiophene) films deposited with floating film transfer method10.1143/APEX.2.111502 ↗
22. Fabrication of large-scale drop-cast films of π-conjugated polymers with floating-film transfer method
23. Controlling factors for orientation of conjugated polymer films in dynamic floating-film transfer method10.1166/jnn.2017.12816 ↗
24. Influence of backbone structure on orientation of conjugated polymers in the dynamic casting of thin floating- films
25. Casting control of floating-films into ribbon-shape structure by modified dynamic FTM
26. Anisotropic charge transport in highly oriented films of semiconducting polymer prepared by ribbon-shaped floating film10.1063/1.5000566 ↗
27. Toward perfect control of end groups and polydispersity in poly(3-hexylthiophene) via catalyst transfer polymerization10.1021/ma200119s ↗
28. Head-to- tail regioregularity of poly(3-hexylthiophene) in oxidative coupling polymerization with FeCl310.1002/(SICI)1099-0518(19990701)37:13<1943::AID-POLA7>3.0.CO;2-X ↗
29. High-performance semiconducting polythiophenes for organic thin-film transistors10.1021/ja039772w ↗
30. Synthesis and characterization of a new light-emitting fluorene-thieno[3,2-b]thiophene-based conjugated copolymer10.1021/ma034168r ↗
31. Mechanism of photocarrier generation and transport in poly(3-alkylthiophene) films10.1143/JJAP.39.6309 ↗
32. Kaneto · 2001 · 1 · 355
33. Liquid-crystalline semiconducting polymers with high charge-Carrier mobility10.1038/nmat1612 ↗
34. Device physics of solution-processed organic field-effect transistors10.1002/adma.200501152 ↗
35. Enhancement of Carrier mobility along with anisotropic transport in non-regiocontrolled poly (3- hexylthiophene) films processed by floating film transfer method10.1016/j.orgel.2016.08.003 ↗
36. Chain conformations and phase behavior of conjugated Polymers10.1039/C6SM00979D ↗
37. Polymer chain shape of poly(3-alkylthiophenes) in solution using small-angle neutron scattering10.1021/ma302463d ↗
38. A stable solution-processed polymer semiconductor with record high mobility for printed transistors10.1038/srep00754 ↗
39. Rapid formation and macroscopic self-assembly of liquid-crystalline, high-mobility, semiconducting thienothiophene10.1002/admi.201700875 ↗
40. Two dimensional optoelectronic simulation based comparison of top and bottom contact organic phototransistors10.1166/jnn.2015.10737 ↗
41. Unexpectedly high field-effect mobility of a soluble, low molecular weight oligoquaterthiophene fraction with low polydispersity10.1007/s00339-008-4994-0 ↗
42. Highly oriented polymer field-effect transistors with high electrical stability10.7567/JJAP.52.121601 ↗
43. In situ probing of the charge transport process at the polymer/fullerene heterojunction interface10.1021/acs.jpcc.5b07810 ↗
44. Molecular orientation and anisotropic Carrier mobility in poorly soluble polythiophene thin films10.1063/1.4718424 ↗