journal article·2010-06Open access

Solvent effect and device optimization of diketopyrrolopyrrole and carbazole copolymer based solar cells

Réda Badrou Aïch, Yingping Zou, Mario Leclerc, Ye Tao

Organic Electronics· Volume 11· Issue 6

Abstract

Abstract Bulk heterojunction organic photovoltaic cells using blends of poly[ N -9′-heptadecanyl-2,7carbazole-alt-3,6-bis(thiophen-5-yl)-2,5-dioctyl-2,5-dihydropyrrolo[3,4-]pyrrole-1,4-dione] (PCBTDPP) and [6,6]-phenyl-C61-butyric acid methyl ester (PC 60 BM) or [6,6]-phenyl-C71-butyric acid methyl ester (PC 70 BM) as electron donor and acceptor were fabricated and characterized. Devices made from 1,2-dichlorobenzene solution demonstrated better performance in terms of short-circuit current density, open-circuit voltage and power conversion efficiency, as compared to the devices made from chloroform and chlorobenzene solutions. By optimizing the donor/acceptor ratio and the thickness of the active layer, a power conversion efficiency of 3.2% was achieved on devices with an active device area of 1 cm 2 , under 100 mW/cm 2 of simulated AM1.5 irradiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Organic semiconductors for solution-processable field-effect transistors (OFETs)10.1002/anie.200701920 ↗
3. Chemical sensors based on amplifying fluorescent conjugated polymers10.1021/cr0501339 ↗
4. Electrical and thermoelectric properties of poly(2,7-carbazole) derivatives10.1021/cm8031175 ↗
5. Molecular engineering of the band gap of π-conjugated systems: facing technological applications10.1002/marc.200700345 ↗
6. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
7. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
8. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
9. High-mobility ambipolar near-infrared light-emitting polymer field-effect transistors10.1002/adma.200702775 ↗
10. Synthesis and characterization of new low-bandgap diketopyrrolopyrrole-based copolymers10.1021/ma901114j ↗
11. A high-mobility low-bandgap poly(2,7-carbazole) derivative for photovoltaic applications10.1021/ma900364c ↗
12. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor−acceptor copolymers10.1021/cm901487f ↗
13. Efficient polymer-based Interpenetrated network photovoltaic cells10.1063/1.1669065 ↗
14. Relating the morphology of poly(p-phenylene vinylene)/methanofullerene blends to solar-cell performance10.1002/adfm.200305049 ↗
15. Nanomorphology of bulk heterojunction organic solar cells in 2D and 3D correlated to photovoltaic performance10.1021/ma802457v ↗
16. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗
17. Soluble and processable regioregular poly(3-hexylthiophene) for thin film field-effect transistor applications with high mobility10.1063/1.117834 ↗
18. Enhanced mobility of poly(3-hexylthiophene) transistors by spin-coating from high-boiling-point solvents10.1021/cm049617w ↗
19. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗