journal article·2018-07

Synthesis and photovoltaic properties of a simple non-fused small molecule acceptor

Xinxin Li, Zhuo Xu, Xia Guo, Qunping Fan, Maojie Zhang, Yongfang Li

Publisher page

Abstract

Abstract In this work, a new non-fused small molecule acceptor Ph-IC based on alkoxyl benzene and IC units was synthesized for photovoltaic applications. The small molecule Ph-IC has a very simple chemical structure and is easily synthesized. Benefited from the coplanar conjugated structure, the O-H and S-H non-covalent interactions, Ph-IC exhibits a narrow optical bandgap of 1.62 eV and a medium electron mobility of 1.84 × 10−4 cm2V−1s−1. When using Ph-IC as acceptor and a wide-bandgap polymer PBFTZ as donor, the devices show a maximum PCE of 5.68% with Voc of 0.89 V, Jsc of 12.37 mA cm−2 and FF of 51.5% under the illumination of AM 1.5 G at 100 mW/cm2. This work demonstrates that the simple-structured and low cost non-fused group can also be used as building blocks in high performation n-OS acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Low-bandgap near-ir conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
2. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
3. Toward solution-processed high-performance polymer solar cells: from material design to device engineering10.1021/acs.chemmater.6b02802 ↗
4. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
5. Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
6. 10.8% efficiency polymer solar cells based on PTB7-Th and PC71BM via binary solvent additives treatment10.1002/adfm.201602181 ↗
7. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
8. Realizing over 10% efficiency in polymer solar cell by device optimization10.1007/s11426-014-5273-x ↗
9. Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells10.1063/1.2181635 ↗
10. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
11. Structure evolution of oligomer fused-ring electron acceptors toward high efficiency of as-cast polymer solar cells10.1002/aenm.201600854 ↗
12. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
13. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
14. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
15. Mapping polymer donors toward high-efficiency fullerene free organic solar cells
16. A non-fullerene electron acceptor based on fluorene and diketopyrrolopyrrole building blocks for solution-processable organic solar cells with an impressive open-circuit voltage10.1039/C4CP03727H ↗
17. Cyanopyridone flanked the tetraphenylethylene to generate an efficient, three-dimensional small molecule non-fullerene electron acceptor10.1039/C7QM00355B ↗
18. A four-directional non-fullerene acceptor based on tetraphenylethylene and diketopyrrolopyrrole functionalities for efficient photovoltaic devices with a high open-circuit voltage of 1.18 V10.1039/C6CC03730E ↗
19. Fullerene-free polymer solar cell based on a polythiophene derivative with an unprecedented energy loss of less than 0.5 eV10.1039/C6TA07672F ↗
20. Wide bandgap small molecular acceptors for low energy loss organic solar cells10.1039/C7TC04669C ↗
21. A novel wide bandgap conjugated polymer (2.0 eV) based on bithiazole for high efficiency polymer solar cells10.1016/j.nanoen.2017.03.013 ↗
22. High-performance nonfullerene polymer solar cells with open-circuit voltage over 1 V and energy loss as low as 0.54 eV10.1016/j.nanoen.2017.07.047 ↗
23. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
24. High-performance nonfullerene polymer solar cells based on a fluorinated wide bandgap copolymer with a high open-circuit voltage of 1.04 V10.1039/C7TA07785H ↗
25. Thermally stable high performance non-fullerene polymer solar cells with low energy loss by using ladder-type small molecule acceptors10.1016/j.orgel.2017.02.008 ↗
26. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss10.1021/acs.chemmater.7b02853 ↗
27. Efficient charge transfer and fine-tuned energy level alignment in a thf-processed fullerene-free organic solar cell with 11.3% efficiency10.1002/adma.201604241 ↗
28. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
29. An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells10.1039/C4TA06004K ↗
30. High-performance nonfullerene polymer solar cells based on imide-functionalized wide-bandgap polymers10.1002/adma.201606396 ↗
31. High-performance non-fullerene polymer solar cells based on fluorine substituted wide bandgap copolymers without extra treatments10.1002/solr.201700020 ↗
32. Single-Junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency
33. Design of a new small-molecule electron acceptor enables efficient polymer solar cells with high fill factor10.1002/adma.201704051 ↗
34. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
35. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
36. Side-chain isomerization on an n-type organic semiconductor itic acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
37. Significant influence of the methoxyl substitution position on optoelectronic properties and molecular packing of small-molecule electron acceptors for photovoltaic cells10.1002/aenm.201700183 ↗
38. Side-chain engineering for efficient non-fullerene polymer solar cells based on a wide-bandgap polymer donor10.1039/C7TA02075A ↗
39. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
40. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
41. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
42. Donor polymer design enables efficient non-fullerene organic solar cells
43. Realizing 11.3% efficiency in fullerene-free polymer solar cells by device optimization10.1007/s11426-016-0198-0 ↗
44. Towards a bright future: polymer solar cells with power conversion efficiencies over 10%10.1007/s11426-016-0424-9 ↗
45. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
46. Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells10.1039/C6TA00612D ↗
47. Hyperbranched polymer as an acceptor for polymer solar cells10.1039/C6CC07335B ↗
48. Organic and polymeric semiconductors enhanced by noncovalent conformational locks10.1021/acs.chemrev.7b00084 ↗
49. Alkoxy-functionalized thienyl-vinylene polymers for field-effect transistors and all-polymer solar cells10.1002/adfm.201303219 ↗
50. Thiazole-based organic semiconductors for organic electronics10.1002/adma.201200721 ↗
51. Noncovalent Se...O conformational locks for constructing high-performing optoelectronic conjugated polymers10.1002/adma.201606025 ↗
52. Soluble dicyanodistyrylbenzene-based non-fullerene electron acceptors with optimized aggregation behavior for high-efficiency organic solar cells10.1002/aenm.201400929 ↗
53. A high efficiency nonfullerene organic solar cell with optimized crystalline organizations10.1002/adma.201504091 ↗
54. Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material10.1039/C6TA05932E ↗
55. Optimization of energy levels by molecular design: evaluation of bis-diketopyrrolopyrrole molecular donor materials for bulk heterojunction solar cells10.1039/c3ee24351f ↗
56. A thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
57. High performance non-fullerene polymer solar cells based on PTB7-Th as the electron donor with 10.42% efficiency10.1039/C7TA10391C ↗
58. Covalently bound clusters of alpha-substituted pdi-rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
59. Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells10.1021/nl401758g ↗
60. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗