journal article·2018-05

Conductivity, dielectric studies and structural properties of P(VA-co-PE) and its application in dye sensitized solar cell

C.Y. Tan, N.K. Farhana, Norshahirah M. Saidi, S. Ramesh, K. Ramesh

Publisher page

Abstract

Abstract Poly(vinyl alcohol-co-ethylene), P(VA-co-PE) gel polymer electrolytes (GPEs) with sodium iodide (NaI) as a dopant salt was synthesized and investigated. Electrolytes containing different concentrations of NaI salt were studied using AC impedance spectroscopy, FTIR spectroscopy, and XRD spectroscopy. The results from dielectric studies reveal both the real part and imaginary part of complex permittivity decrease with increasing frequency. An opposite trend was observed when the temperatures of the samples were increased. Besides, the dispersion relation from the modulus studies confirmed that ionic conductivity is dominant in the GPE samples. Results from temperature studies reveal that all GPE samples conform the Arrhenius equation in the temperature range of 303 K to 373 K. The sample with 40% of NaI exhibits the highest ionic conductivity of 2.266 mS cm−1 with the activation energy of 0.16808 eV. Furthermore, FTIR studies proved the complexation between P(VA-co-PE) and NaI. The crystallinity of the samples was shown to be increasing with the increasing concentration of NaI salt via XRD results. Finally, DSSCs were assembled using the polymer electrolyte and used for photovoltaic studies. The best performance of DSSC was obtained with the energy conversion efficiency of 3.32% using the GPE sample with 40% NaI.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Battery Materials and Technologies · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Zinc oxide nanostructure-based dye-sensitized solar cells10.1007/s10853-016-0668-z ↗
2. Advancements in the development of TiO2 photoanodes and its fabrication methods for dye sensitized solar cell (DSSC) applications. A review10.1016/j.rser.2017.03.129 ↗
3. Exploring the effect of novel N -butyl-6-methylquinolinium bis (tri fl uoromethylsulfonyl) imide ionic liquid addition to poly ( methyl methacrylate-co-methacrylic ) acid electrolyte system as employed in gel-state dye sensitized sol10.1016/j.electacta.2017.04.097 ↗
4. Exploration on polypropylene carbonate polymer for gel polymer electrolyte preparation and dye-sensitized solar cell application10.1002/app.45091 ↗
5. Ionic conductivity improvement in poly (propylene) carbonate-based gel polymer electrolytes using 1-butyl-3-methylimidazolium iodide (BmimI) ionic liquid for dye-sensitized solar cell application10.1007/s11581-017-1979-z ↗
6. Polyaniline/graphene/multi-walled carbon nanotube composites as counter electrode for dye-sensitized solar cells10.1557/opl.2014.900 ↗
7. Effect of different electrolytes on the efficiency of dye sensitized solar cells for solar energy conversion10.1166/jnn.2017.14004 ↗
8. Highly efficient gel-state dye-sensitized solar cells prepared using propionitrile and poly(vinylidene fluoride-co-hexafluoropropylene)10.1016/j.jpowsour.2016.11.014 ↗
9. A highly stable and efficient quasi solid state dye sensitized solar cell based on Polymethyl methacrylate(PMMA)/Polyaniline Nanotube(PANI-NT) gel electrolyte10.1016/j.electacta.2016.11.077 ↗
10. Application of gel electrolyte in dye sensitized solar cells10.17586/2220-8054-2016-7-4-752-754 ↗
11. Conductivity studies of poly(ethylene oxide)(PEO)/poly(vinyl alcohol) (PVA) blend gel polymer electrolytes for dye-sensitized solar cells10.1007/s11581-016-1758-2 ↗
12. Novel development towards preparation of highly efficient ionic liquid based co-polymer electrolytes and its application in dye-sensitized solar cells
13. Solid polymer electrolyte dye-sensitized solar cells with organized mesoporous TiO2 interfacial layer templated by poly(vinyl alcohol)-poly(methyl methacrylate) comb copolymer10.1016/j.ssi.2016.12.033 ↗
14. Three-dimensional electrodes for high-performance bioelectrochemical systems
15. Dye-sensitized solar cell using 4-chloro-7-nitrobenzofurazan incorporated polyvinyl alcohol polymer electrolyte10.1007/s12648-016-0869-y ↗
16. Relative humidity sensor based on tilted fiber Bragg Grating with polyvinyl alcohol coating10.1109/LPT.2009.2013185 ↗
17. Physical characterization and pre-assessment of recycled high-density polyethylene as 3D printing material10.1007/s10924-016-0793-4 ↗
18. Lithium garnet oxide dispersed polymer composite membrane for rechargeable lithium batteries10.1007/s11581-016-1830-y ↗
19. Structural and electrical characteristics of PVA: NaTf based solid polymer electrolytes: role of lattice energy of salts on electrical DC conductivity10.1007/s10854-017-7117-x ↗
20. Electrical, dielectric and electrochemical studies on new Li ion conducting solid polymer electrolytes based on polyethylene glycol p-tert-octylphenyl ether10.1134/S0965545X17050017 ↗
21. Preparation and characterization of hot-pressed Li + ion conducting PEO composite electrolytes
22. Ionic conductivity in crystalline polymer electrolytes10.1038/35087538 ↗
23. Temperature dependence of ion transport: the compensated arrhenius equation10.1021/jp810095g ↗
24. Study of the temperature dependent transport properties in nanocrystalline lithium lanthanum titanate for lithium ion batteries10.1016/j.jpcs.2015.12.015 ↗
25. Exploration on the P(VP-co-VAc) copolymer based gel polymer electrolytes doped with quaternary ammonium iodide salt for DSSC applications: electrochemical behaviors and photovoltaic performances
26. Conductivity and dielectric behavior of polyethylene oxide-lithium perchlorate solid polymer electrolyte films
27. Thermal, vibrational, and dielectric studies on PVP/LiBF4+ionic liquid [EMIM][BF4]-based polymer electrolyte films10.1016/j.jpcs.2014.02.005 ↗
28. Specific ion effects on the self-assembly of ionic surfactants: a molecular thermodynamic theory of micellization with dispersion forces10.1021/la501008x ↗
29. Ion conduction mechanism in solid polymer electrolyte: an applicability of almond-west formalism10.1016/S1452-3981(23)10994-1 ↗
30. Observation of ionic transport and ion-coordinated segmental motions in composite (polymer-salt-clay) solid polymer electrolyte10.1007/s11581-014-1181-5 ↗
31. Effect of plasticizers on ionic conductivity and dielectric relaxation of PEO-LiClO4 polymer electrolyte10.1016/j.electacta.2015.04.178 ↗
32. Tubular array, dielectric, conductivity and electrochemical properties of biodegradable gel polymer electrolyte10.1016/j.mseb.2013.10.013 ↗
33. Structural, electrical and electrochemical properties of polyacrylonitrile-ammonium hexaflurophosphate polymer electrolyte system10.1007/s10965-016-0952-2 ↗
34. A new single-ion polymer electrolyte based on polyvinyl alcohol for lithium ion batteries10.1016/j.electacta.2012.08.114 ↗
35. Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application10.1016/j.ijhydene.2015.10.108 ↗
36. Influence of the water state on the ionic conductivity of ion-exchange membranes based on polyethylene and sulfonated grafted polystyrene10.1016/j.matchemphys.2017.05.015 ↗
37. Electrical performance of lithium ion based polymer electrolyte with polyethylene glycol and polyvinyl alcohol network10.1080/00914037.2016.1163569 ↗
38. A short review on alkaline solid polymer electrolyte based on polyvinyl alcohol (PVA) as polymer electrolyte for electrochemical devices applications
39. The role of regioregularity, crystallinity and chain orienta- tion on electron transport in a high mobility n-type copoly10.1021/ja4118736 ↗
40. Performance and stability of lead perovskite/TiO2, polymer/PCBM, and dye sensitized solar cells at light intensities up to 70 suns10.1002/adma.201402612 ↗
41. Efficiency enhancement by mixed cation effect in dye-sensitized solar cells with a PVdF based gel polymer electrolyte10.1016/j.ijhydene.2013.07.028 ↗
42. Toward higher energy conversion efficiency for solid polymer electrolyte dye-sensitized solar cells: ionic conductivity and TiO2 pore-filling10.1021/jz5002727 ↗
43. Dye-sensitized solar cells with PVA-KI-EC-PC gel electrolytes10.1007/s11082-013-9722-0 ↗