journal article·2013-07

Key factors to improve the efficiency of roll-to-roll printed organic photovoltaics

Christos Koidis, Stergios Logothetidis, Apostolos Ioakeimidis, Argiris Laskarakis, Christos Kapnopoulos

Organic Electronics· Volume 14· Issue 7
Publisher page

Abstract

In order to achieve the cost-efficient scalability of flexible organic photovoltaics (OPVs), the optimization of key factors related to the materials and roll-to-roll (R2R) processes is necessary. The limited drying during the R2R printing process induces a vertical phase separation leading to the formation of a P3HT-rich top region on the photoactive layer which acts as an electron barrier in normal geometry. We show that the increase of R2R drying time and/or post-annealing can enhance the OPV efficiency by the diffusion of PCBM towards the photoactive layer surface forming an electron transport network. It is estimated that the volume fraction of PCBM at the top region of the films triples from about 9% to 30%. In addition, the direct exposure of PEDOT:PSS to air after printing leads to morphological changes that negatively affect the efficiency. Therefore, the protection of PEDOT:PSS from air in combination to the increase of the R2R drying time enables the significant increase of the R2R printed OPVs efficiency to 1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
3. Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing10.1063/1.4726018 ↗
4. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
5. Degradation patterns in water and oxygen of an Inverted polymer solar cell10.1021/ja106299g ↗
6. High efficient plastic solar cells fabricated with a high-throughput gravure printing method10.1016/j.solmat.2010.05.027 ↗
7. Gravure printing inverted organic solar cells: the influence of ink properties on film quality and device performance10.1016/j.solmat.2012.04.025 ↗
8. Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics10.1016/j.solmat.2012.12.044 ↗
9. Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance10.1039/c2jm31277h ↗
10. Effect of photovoltaic polymer/fullerene blend composition ratio on microstructure evolution during film solidification investigated in real time by x-ray diffraction10.1021/ma2000338 ↗
11. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
12. Surface segregation at the aluminum interface of poly(3-hexylthiophene)/fullerene solar cells10.1063/1.3294290 ↗
13. Cullity · 1956
14. Real-time investigation of crystallization and phase-segregation dynamics in P3HT:PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗
15. Effect of P3HT:PCBM concentration in solvent on performances of organic solar cells10.1016/j.solmat.2009.01.019 ↗
16. Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells10.1021/nl8014022 ↗
17. Effect of PEDOT:PSS–molecule interface on the charge transport characteristics of the large-area molecular electronic junctions10.1016/j.orgel.2012.02.002 ↗
18. Solution-processed zinc oxide nanoparticles as interlayer materials for inverted organic solar cells10.1016/j.solmat.2012.09.007 ↗
19. Ellipsometry as a nondestructive depth profiling tool for roll-to-roll manufactured flexible solar cells10.1021/jp2004002 ↗