Toward efficient non-fullerene polymer solar cells: Selection of donor polymers
Source abstract
Abstract
Abstract Recently, perylene bisimides have been explored and developed as potential candidates for non-fullerene acceptors and power conversion efficiencies (PCEs) exceeding 3% were realized in the non-fullerene polymer solar cells (NF-PSCs) featuring perylene bisimides as acceptors. Considering that only a few donor polymers like P3HT and PBDTTT-C-T were utilized in non-fullerene PSCs, screening donor polymers with well-matched energy levels, absorption spectrum as well as hole mobility in NF-PSCs will be the key to promote the current PCEs. Herein, four high performance donor polymers including PBDTTPD, PBDTTT-EFT, PDPP3T, PSBTBT were employed for the optimization of single bond-linked perylene bisimide (SDIPBI)-based NF-PSCs. A clear criterion in selection of donor polymers has been established for the SDIPBI-based NF-PSCs. Suitable energy level differences, finer morphology, and broad absorption ranges could be successively screened for donor polymers. Interestingly, NF-PSCs based on PBDTTPD/SDIPBI delivers a high Voc of 1.04 V and a desirable PCE of 3.4%. Moreover, the SDIPBI-based NF-PSC employing PBDTTT-EFT as donor polymer exhibits a high PCE up to 4.5%. The results implicate that to select donor polymers is a feasible strategy to boost the photovoltaic performance of NF-PSCs further.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
3. Molecular miscibility of polymer–fullerene blends10.1021/jz101276h ↗
4. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
5. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol-soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
6. Polymer donor–polymer acceptor (all-polymer) solar cells10.1016/j.mattod.2013.04.005 ↗
7. Polymer photovoltaic cells – enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
8. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
9. Recent advances of non-fullerene, small molecular acceptors for solution processed bulk heterojunction solar cells10.1039/C3TA14236A ↗
10. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
11. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
12. Efficient tandem and triple-junction polymer solar cells10.1021/ja401434x ↗
13. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a ∼300 nm thick conventional single-cell device10.1039/C4EE01529K ↗
14. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
15. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
16. Linear side chains in benzo[1,2-b:4,5-b ‘]dithiophene-thieno[3,4-c]pyrrole-4,6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
17. Molecular weight effect on the efficiency of polymer solar cells10.1021/am404157t ↗
18. High performance polymer solar cells with as-prepared zirconium acetylacetonate film as cathode buffer layer10.1038/srep04691 ↗
19. High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer10.1021/ja408363c ↗
20. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-T/PC71BM10.1002/adma.201400411 ↗
21. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
22. Optimization of the power conversion efficiency of room temperature-fabricated polymer solar cells utilizing solution processed tungsten oxide and conjugated polyelectrolyte as electrode interlayer10.1002/adfm.201304256 ↗
23. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
24. Effect of fluorine content in thienothiophene–benzodithiophene copolymers on the morphology and performance of polymer solar cells10.1021/cm500953e ↗
25. Side chain selection for designing highly efficient photovoltaic polymers with 2D-conjugated structure10.1021/ma500829r ↗
26. Suppressed charge recombination in inverted organic photovoltaics via enhanced charge extraction by using a conductive fullerene electron transport layer10.1002/adma.201402276 ↗
27. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
28. Bulk heterojunction solar cells with large open-circuit voltage: electron transfer with small donor–acceptor energy offset10.1002/adma.201003768 ↗
29. Non-fullerene acceptor-based bulk heterojunction polymer solar cells: engineering the nanomorphology via processing additives10.1002/aenm.201100285 ↗
30. A non-fullerene small molecule as efficient electron acceptor in organic bulk heterojunction solar cells10.1002/adma.201103927 ↗
31. Rational molecular engineering towards efficient non-fullerene small molecule acceptors for inverted bulk heterojunction organic solar cells10.1039/c3cc47289b ↗
32. New conjugated molecular scaffolds based on [2,2]paracyclophane as electron acceptors for organic photovoltaic cells10.1039/C4CC04384G ↗
33. Comparing the device physics and morphology of polymer solar cells employing fullerenes and non-fullerene acceptors10.1002/aenm.201301426 ↗
34. Decacyclene triimides: paving the road to universal non-fullerene acceptors for organic photovoltaics10.1002/aenm.201301007 ↗
35. Donor–acceptor block copolymers for photovoltaic applications10.1039/c0jm00665c ↗
36. Perylene tetracarboxydiimide as an electron acceptor in organic solar cells: a study of charge generation and recombination10.1021/jp907633g ↗
37. Conjugated-polymer blends for optoelectronics10.1002/adma.200900783 ↗
38. Fullerene-free organic solar cells with an efficiency of 3.7% based on a low-cost geometrically planar perylene diimide monomer10.1039/C4TA02851A ↗
39. Efficiency-limiting processes in low-bandgap polymer: perylene diimide photovoltaic blends10.1021/jp503366m ↗
40. Nonplanar perylene diimides as potential alternatives to fullerenes in organic solar cells10.1021/jz301047d ↗
41. Charge generation and transport in efficient organic bulk heterojunction solar cells with a perylene acceptor10.1039/C3EE42484G ↗
42. A potential perylene diimide dimer-based acceptor material for highly efficient solution-processed non-fullerene organic solar cells with 4.03% efficiency10.1002/adma.201300897 ↗
43. A star-shaped perylene diimide electron acceptor for high-performance organic solar cells10.1002/adma.201400525 ↗
44. Perylene-diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
45. Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells10.1039/C3CC47204C ↗
46. Selecting a donor polymer for realizing favorable morphology in efficient non-fullerene acceptor-based solar cells10.1002/smll.201401082 ↗
47. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
48. Ring substituents mediate the morphology of PBDTTPD–PCBM bulk-heterojunction solar cells10.1021/cm500172w ↗
49. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
50. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
51. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells10.1002/adma.201202855 ↗
52. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗