journal article·2007-12

Contact resistance between pentacene and indium–tin oxide (ITO) electrode with surface treatment

Dong-Jin Yun, Dong-Kyu Lee, Hwan-Ki Jeon, Shi-Woo Rhee

Organic Electronics· Volume 8· Issue 6
Publisher page

Abstract

Abstract Contact resistance between indium–tin oxide (ITO) electrode and pentacene was studied by transmission line method (TLM). Organic solvent cleaned, inorganic alkali cleaned, and self-assembled monolayer (with OTS: octadecyltrichlorosilane) modified ITO electrode structures were compared. Pentacene layer of 300 A thickness was vacuum deposited on patterned ITO layer at 70 °C with a deposition rate of 0.3 A/s. Alkali cleaned and SAM modified ITO gave a lower contact resistance of about 6.34 × 104 Ω cm2 and 1.88 × 103 Ω cm2, respectively than organic solvent cleaned ITO of about 6.58 × 105 Ω cm2. Especially with the SAM treatment, the work function of ITO increased closer to the highest occupied molecular orbital (HOMO) level of pentacene, which lowers the injection barrier between ITO and pentacene. It was also believed that pentacene morphology was improved on SAM modified ITO surface due to the lowering of the surface energy. We could obtain the low contact resistance with SAM treatment which is comparable to the measured value of gold–pentacene contact, 1.86 × 103 Ω cm2. This specific contact resistance is still much higher than that of amorphous silicon thin film transistor (0.1–30 Ω cm2).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Shekar · Kor. J. Chem. Eng. · 2004 · 21 · 26710.1007/BF02705409 ↗
2. Horowitz · J. Mater. Res. · 2004 · 19 · 194610.1557/JMR.2004.0266 ↗
3. Busta · IEEE Trans. Electro. Dev. · 1989 · 36 · 288310.1109/16.40950 ↗
4. Bare · IEEE Electro. Dev. Lett. · 1986 · 7 · 43110.1109/EDL.1986.26426 ↗
5. Beebe · J. Am. Chem. Soc. · 2002 · 124 · 1126810.1021/ja0268332 ↗
6. Pesavento · J. Appl. Phys. · 2004 · 96 · 731210.1063/1.1806533 ↗
7. Necliudov · Solid-State Electro. · 2003 · 47 · 25910.1016/S0038-1101(02)00204-6 ↗
8. Zhu · J. Mater. Chem. · 2002 · 12 · 225010.1039/B201391F ↗
9. Morgado · J. Phys. D: Appl. Phys. · 2003 · 36 · 43410.1088/0022-3727/36/5/304 ↗
10. Campbell · Appl. Phys. Lett. · 1997 · 71 · 352810.1063/1.120381 ↗
11. Obata · Surf. Coat. Technol. · 2004 · 180 · 13610.1016/j.surfcoat.2003.10.053 ↗
12. Oussalah · Solid-State Electro. · 2005 · 49 · 161710.1016/j.sse.2005.08.004 ↗
13. Ganzorig · Appl. Phys. Lett. · 2001 · 79 · 27210.1063/1.1384896 ↗
14. Tao · Wear · 2006 · 261 · 73010.1016/j.wear.2006.01.045 ↗
15. Kinloch · 1987
16. Yang · Adv. Funct. Mater. · 2005 · 15 · 180610.1002/adfm.200400486 ↗
17. Kymissis · IEEE Trans. Electro. Dev. · 2001 · 48 · 106010.1109/16.925226 ↗
18. Rusu · Phys. Rev. B · 2006 · 74 · 07341410.1103/PhysRevB.74.073414 ↗
19. Cahen · Adv. Mater. · 2003 · 15 · 27110.1002/adma.200390065 ↗
20. Kagan · 2003