journal article·2013-04

Optimized ITO-free tri-layer electrode for organic solar cells

Sylvain Vedraine, Ahmad El Hajj, Philippe Torchio, Bruno Lucas

Organic Electronics· Volume 14· Issue 4
Publisher page

Abstract

The optical properties of ZnO/Ag/ZnO (ZAZ) multilayer structures were numerically modeled and calculated by a FDTD method. Such tri-layers were also manufactured using an ion beam sputtering plant. A good agreement is obtained between modelizations and realizations. The impact of the oxide thicknesses on the optical properties of the ZAZ structures were experimentally and numerically investigated, and allow us to adjust the spectral position of the transmission maximum. The transmission of these structures is optimized up to around 74%, on the whole absorption spectral range of the photoactive P3HT:PCBM bulk heterojunction. The best electrode design is glass/ZnO (30 nm)/Ag (14 nm)/ZnO (30 nm), which presents a sheet resistance of 7 Ω/□. The optimized ZAZ structure was successfully integrated in an organic solar cell as anode. A photovoltaic efficiency of 2.58% is obtained and is compared to an organic solar cell integrating a traditional ITO anode with an efficiency of 2.99%. Numerical calculations of the intrinsic absorption inside each layer of the organic solar cells are performed. Alternative ITO-free electrodes for organic solar cells are demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. ITO-free inverted polymer solar cells using a GZO cathode modified by ZnO10.1016/j.solmat.2011.01.011 ↗
2. Highly efficient blue organic light-emitting devices with indium-free transparent anode on flexible substrates10.1016/j.orgel.2010.06.018 ↗
3. Criteria for choosing transparent conductors10.1557/mrs2000.151 ↗
4. Effect of deposition temperature on the properties of Al-doped ZnO films prepared by pulsed DC magnetron sputtering for transparent electrodes in thin-film solar cells10.1016/j.apsusc.2012.07.082 ↗
5. Effects of thickness and atmospheric annealing on structural, electrical and optical properties of GZO thin films by spray pyrolysis10.1016/j.jallcom.2012.05.128 ↗
6. Properties of fluorine doped ZnO thin films deposited by magnetron sputtering10.1016/j.solmat.2008.05.010 ↗
7. Preparation and characterization of Al doped ZnO thin films by sol–gel process10.1016/j.jallcom.2012.07.075 ↗
8. Transparent Al-doped ZnO anodes in organic light-emitting diodes investigated using a hole-only device10.1016/j.apsusc.2012.08.014 ↗
9. Effects of deposition temperature on characteristics of Ga-doped ZnO film prepared by highly efficient cylindrical rotating magnetron sputtering for organic solar cells10.1016/j.solmat.2010.09.036 ↗
10. Effect of Ga doping concentration on the luminescence efficiency of GaN light-emitting diodes with Ga-doped ZnO contacts10.1007/s00340-012-5129-z ↗
11. Highly transparent and conducting fluorine-doped ZnO thin films prepared by pulsed laser deposition10.1016/j.solmat.2010.11.012 ↗
12. Indium–tin-oxide-free tris(8-hydroxyquinoline) Al organic light-emitting diodes with 80% enhanced power efficiency10.1063/1.3634210 ↗
13. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗
14. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
15. Spin- and spray-deposited single-walled carbon-nanotube electrodes for organic solar cells10.1002/adfm.200902369 ↗
16. Effect of Acid treatment on carbon nanotube-based flexible transparent conducting films10.1021/ja0722224 ↗
17. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
18. Silver nanowire networks as flexible transparent, conducting films: extremely high DC to optical conductivity ratios10.1021/nn900348c ↗
19. Scalable coating and properties of transparent flexible, silver nanowire electrodes10.1021/nn1005232 ↗
20. Effect of the thickness of the MoO3 layers on optical properties of MoO3/Ag/MoO3 multilayer structures10.1063/1.4751334 ↗
21. Semitransparent polymer solar cells using V2O5/Ag/V2O5 as transparent anodes10.1016/j.orgel.2011.03.036 ↗
22. High-work-function transparent conductive oxides with multilayer films10.1143/APEX.5.041102 ↗
23. Optimization of ZnO/Ag/ZnO multilayer electrodes obtained by Ion Beam Sputtering for optoelectronic devices10.1016/j.tsf.2011.10.193 ↗
24. Semitransparent inverted polymer solar cells using MoO3/Ag/V2O5 as transparent anodes10.1016/j.solmat.2011.09.004 ↗
25. Metallic conductivity and the role of copper in ZnO/Cu/ZnO thin films for flexible electronics10.1063/1.3077184 ↗
26. ITO/Au/ITO multilayer thin films for transparent conducting electrode applications10.1016/j.apsusc.2007.07.080 ↗
27. Room temperature growth and properties of ZnO films by pulsed laser deposition10.1016/j.apsusc.2010.08.057 ↗
28. Transparent conductive Ga-doped ZnO/Cu multilayers prepared on polymer substrates at room temperature10.1016/j.solmat.2011.02.004 ↗
29. Structural studies of room-temperature RF magnetron sputtered ZnO films under different RF powered conditions10.1016/S0921-5107(03)00281-2 ↗
30. ITO films realized at room-temperature by ion beam sputtering for high-performance flexible organic light-emitting diodes10.1051/epjap:2006056 ↗
31. Low temperature deposition of ITO thin films by ion beam sputtering10.1016/S0040-6090(00)01388-2 ↗
32. Improved conductivity and mechanism of carrier transport in zinc oxide with embedded silver layer10.1063/1.2829788 ↗
33. Palik · 1998 · vol. 1
34. Optical properties of Al-doped ZnO thin films by ellipsometry10.1016/j.apsusc.2007.09.104 ↗
35. Intrinsic absorption of plasmonic structures for organic solar cells10.1016/j.solmat.2010.12.045 ↗
36. Localization of the surface plasmon polariton caused by random roughness and its role in surface-enhanced optical phenomena10.1103/PhysRevLett.54.1559 ↗
37. Macleod · 1986
38. Modeling the short-circuit current density of polymer solar cells based on P3HT:PCBM blend10.1016/j.solmat.2006.10.019 ↗
39. Optical modeling of the ultimate efficiency of (Pentacene: N, N′-ditridecylperylene-3,4,9,10-tetracarboxylic diimide)-blend solar cells10.1063/1.2767619 ↗
40. New figure of merit for transparent conductors10.1063/1.323240 ↗
41. Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer10.1016/j.solmat.2010.01.004 ↗
42. Effects of the optical microcavity on the performance of ITO-free polymer solar cells with WO3/Ag/WO3 transparent electrode10.1016/j.solmat.2012.01.021 ↗
43. Coupled plasmonic modes in organic planar microcavities10.1063/1.4729820 ↗