Control of TiO2 electron transport layer properties to enhance perovskite photovoltaics performance and stability
Source abstract
Abstract
Abstract This study demonstrates the effect of electron collection and transportation for TiO2 electron transport layer (ETL) of the mesoscopic perovskite solar cells (PSCs). The influence of compact TiO2 layer (c-TiO2) with various spray cycles, the particle size effect of mesoporous TiO2 (meso-TiO2) film and post-treatment of TiO2 electrode for perovskite solar cells have been studied systematically. We further optimize the meso-TiO2 thickness to enhance the electron collection and transport efficiency and to reduce the anomalous J-V hysteresis phenomenon of PSCs. After adjusting the fabrication process of TiO2 ETL, the highest performance of small cell PSC shows the power conversion efficiency (PCE) of 19.39% in the reverse scan and 19.12% in the forward scan, respectively. A sub-module PSC within an active area of 11.7 cm2 exhibits impressive PCE of 16.03% under the illumination of 100 mW/cm2 (AM1.5G). Moreover, it also shows an outstanding PCE of 25.49% under the illumination of 6000 lx of T5 indoor light source.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Promises and challenges of perovskite solar cells10.1126/science.aam6323 ↗
2. Völker · Organic Charge Carriers for Perovskite Solar Cells · 2015 · 8 · 3012
3. Enhancing perovskite solar cell performance and stability by doping barium in methylammonium lead halide10.1039/C7TA05720B ↗
4. Picosecond capture of photoexcited electrons improves photovoltaic conversion in MAPbI3:C70-doped planar and mesoporous
5. Effect of chloride substitution on interfacial charge transfer processes in MAPbI3 perovskite thin film solar cells: planar versus mesoporous10.1039/C8NA00317C ↗
6. High Br– content CsPb(ClyBr1–y)3 perovskite nanocrystals with strong Mn2+ emission through diverse cation/anion exchange engineering10.1021/acsami.7b18750 ↗
7. Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells10.1021/ja5033259 ↗
8. Bai · 2018 · vol. 8 · 1701883
9. Halogen-substituted fullerene derivatives for interface engineering of perovskite solar cells10.1039/C8TA07904H ↗
10. Cho · 2017 · vol. 10 · 3687
11. Self-formed grain boundary healing layer for highly efficient CH3 NH3 PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
12. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
13. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
14. High conductance in ultrathin films of ZnO
15. Amorphous tin oxide as a low-temperature-processed electron-transport layer for organic and hybrid perovskite solar cells10.1021/acsami.6b13675 ↗
16. Severe morphological deformation of spiro-OMeTAD in (CH3NH3)PbI3 solar cells at high temperature10.1021/acsenergylett.7b00582 ↗
17. Hole‐transport materials for perovskite solar cells10.1002/anie.201601757 ↗
18. Direct C−H arylation meets perovskite solar cells: tin‐free synthesis shortcut to high‐performance hole‐transporting materials10.1002/asia.201800454 ↗
19. Thermo-evaporated pentacene and perylene as hole transport materials for perovskite solar cells10.1016/j.dyepig.2018.07.053 ↗
20. Perovskite solar cells: influence of hole transporting materials on
21. Correlating variability of modeling parameters with photovoltaic performance: Monte Carlo simulation of a meso-structured perovskite solar cell10.1016/j.apenergy.2018.12.066 ↗
22. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
23. Enhancing perovskite solar cell performance by interface engineering using CH3NH3PbBr0.9I2.1 quantum dots10.1021/jacs.6b04519 ↗
24. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
25. Electronic structure of TiO2/CH3NH3PbI3 perovskite solar cell interfaces10.1021/jz402749f ↗
26. Perovskite-Structured photovoltaic materials
27. The architecture of the electron transport layer for a perovskite solar cell10.1039/C7TC04649A ↗
28. Enhancing the efficiency of perovskite solar cells using mesoscopic zinc-doped TiO2 as the electron extraction layer through band alignment10.1039/C8TA05291C ↗
29. Enhanced power conversion efficiency of perovskite solar cells based on mesoscopic Ag-doped TiO2 electron transport layer10.1016/j.apsusc.2018.10.256 ↗
30. Spontaneous synthesis of highly crystalline TiO2 compact/mesoporous stacked films by a low-temperature steam-annealing method for efficient perovskite solar cells10.1021/acsami.8b03532 ↗
31. Amorphous metal oxide blocking layers for highly efficient low-temperature brookite TiO2-based perovskite solar cells10.1021/acsami.7b16662 ↗
32. Di Giacomo · 2015 · vol. 5 · 1401808
33. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
34. Enhancing organolead halide perovskite solar cells performance through interfacial engineering using Ag-doped TiO2 hole blocking layer10.1002/solr.201800072 ↗
35. Compact nanostructured TiO2 deposited by aerosol spray pyrolysis for the hole-blocking layer in a CH3NH3PbI3 perovskite solar cell10.1016/j.solener.2016.07.035 ↗
36. Spray deposited lanthanum doped TiO2 compact layers as electron selective contact for perovskite solar cells10.1016/j.solmat.2017.04.027 ↗
37. Effect of TiO2 particle size and layer thickness on mesoscopic perovskite solar cells10.1016/j.apsusc.2017.11.124 ↗
38. Double functions of porous TiO2 electrodes on CH3NH3PbI3 perovskite solar cells: enhancement of perovskite crystal transformation and prohibition of short circuiting10.1063/1.4891597 ↗
39. Zhu · 2015
40. Brookite TiO2 as a low-temperature solution-processed mesoporous layer for hybrid perovskite solar cells10.1039/C5TA06177F ↗
41. TiO2-B as an electron transporting material for highly efficient perovskite solar cells10.1016/j.jpowsour.2019.01.041 ↗
42. An acid-free medium growth of rutile TiO2 nanorods arrays and their application in perovskite solar cells10.1039/C4TC02249A ↗
43. The size effect of TiO2 nanoparticles on a printable mesoscopic perovskite solar cell10.1039/C4TA07030E ↗
44. Nanocrystalline titanium oxide electrodes for photovoltaic applications10.1111/j.1151-2916.1997.tb03245.x ↗
45. The effects of hydrothermal temperature and thickness of TiO2 film on the performance of a dye-sensitized solar cell10.1016/j.solmat.2006.03.012 ↗
46. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
47. Additive enhanced crystallization of solution‐processed perovskite for highly efficient planar‐heterojunction solar cells10.1002/adma.201400231 ↗
48. Comparison of dye-sensitized rutile- and anatase-based TiO2 solar cells10.1021/jp994365l ↗
49. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
50. Solvent annealing of perovskite‐induced crystal growth for photovoltaic‐device efficiency enhancement10.1002/adma.201401685 ↗
51. Stability of perovskite solar cells10.1016/j.solmat.2015.12.025 ↗