journal article·2019-03

UV- ozone treated graphene oxide/ PEDOT:PSS bilayer as a novel hole transport layer in highly efficient and stable organic solar cells

Saqib Rafique, Nur Adilah Roslan, Shahino Mah Abdullah, Lijie Li, Azzuliani Supangat, Asim Jilani, Mitsumasa Iwamoto

Publisher page

Abstract

Abstract The utilization of UV-ozone (UVO) treated graphene oxide (GO)/PEDOT:PSS bilayer as hole transport layer (HTL) in solution processed organic solar cells (OSCs) is demonstrated. The HTLs were treated with UVO for 0, 5, 10 and 15 min. The 10 min treated OSC showed the best performance and displayed power conversion efficiency (PCE) of 5.24%, much higher than the untreated OSC device. This enhanced performance is mainly driven by improvements in the short circuit current (∼10.82 mA/cm2) as well as the fill factor (∼57%) that is ascribed to the moderate reduction of GO and increased work function (WF) of PEDOT:PSS after UVO treatment, which improved the contact conditions between the HTL and photoactive layer. Consequently, extraction efficiency of the photogenerated holes is increased, while recombination probability of holes and electrons in the photoactive layer is decreased. Moreover, the UVO-reduction of GO and consequently increased conductivity of reduced-GO (r-GO) has been modeled and proved using the density functional theory (DFT) simulation. Meanwhile, the 15 min UVO-treated OSC device showed severe reduction in the PCE that dropped to 2.11%, possibly due to various factors such as decomposition of chemical bonds, significant increase in the series resistance and pronounced drop in the photovoltaic performance parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Layer by layer characterisation of the degradation process in PCDTBT: PC71BM based normal architecture polymer solar cells10.1016/j.orgel.2016.10.029 ↗
2. Stability enhancement in organic solar cells by incorporating V 2 O 5 nanoparticles in the hole transport layer10.1039/C6RA07210K ↗
3. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
5. Role of interfacial layers in organic solar cells: energy level pinning versus phase segregation10.1021/acsami.6b02712 ↗
6. Interfacial layers in organic solar cells
7. Interface materials for organic solar cells10.1039/b921624c ↗
8. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
9. Enhanced performance in polymer solar cells by surface energy control10.1002/adfm.201000960 ↗
10. Efficient and air-stable planar perovskite solar cells formed on graphene-oxide-modified PEDOT: PSS hole transport layer10.1007/s40820-017-0140-x ↗
11. Polymer bulk heterojunction solar cells with PEDOT: PSS bilayer structure as hole extraction layer10.1002/cssc.201200950 ↗
12. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
13. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
14. Surface treatment of NiO hole transport layers for organic solar cells10.1109/JSTQE.2010.2049347 ↗
15. Electron and hole transport layers: their use in inverted bulk heterojunction polymer solar cells10.3390/electronics3010132 ↗
16. NiOX/MoO3 Bi‐layers as efficient hole extraction contacts in organic solar cells10.1002/adfm.201302477 ↗
17. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
18. Electrochemical characterization of the solvent-enhanced conductivity of poly (3, 4-ethylenedioxythiophene) and its application in polymer solar cells10.1039/b822729b ↗
19. Graphene oxide/PEDOT: PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells10.1039/C5NR05271H ↗
20. V2O5-PEDOT: PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
21. Solution-processed MoO3: PEDOT: PSS hybrid hole transporting layer for inverted polymer solar cells10.1021/am509049t ↗
22. Efficient preparation of ultralarge graphene oxide using a PEDOT: PSS/GO composite layer as hole transport layer in polymer-based optoelectronic devices10.1039/C4RA09474C ↗
23. An efficient polymer solar cell using graphene oxide interface assembled via layer-by-layer deposition10.1016/j.orgel.2015.04.017 ↗
24. Improving the efficiency of organic photovoltaics by tuning the work function of graphene oxide hole transporting layers10.1039/C4NR01539H ↗
25. Solution-processable graphene oxide as an efficient hole transport layer in polymer solar cells10.1021/nn100551j ↗
26. Graphene oxide hole transport layers for large area, high efficiency organic solar cells10.1063/1.4893787 ↗
27. Moderately reduced graphene oxide as hole transport layer in polymer solar cells via thermal assisted spray process10.1016/j.apsusc.2014.01.061 ↗
28. Highly efficient polymer-based optoelectronic devices using PEDOT: PSS and a GO composite layer as a hole transport layer10.1021/am4051487 ↗
29. Few-layered graphene quantum dots as efficient hole-extraction layer for high-performance polymer solar cells10.1016/j.nanoen.2015.04.019 ↗
30. Significantly improved photovoltaic performance in polymer bulk heterojunction solar cells with graphene oxide/PEDOT: PSS double decked hole transport layer10.1038/srep39555 ↗
31. Graphene oxide/PEDOT: PSS and reduced graphene oxide/PEDOT: PSS hole extraction layers in organic photovoltaic cells10.1002/pssa.201228040 ↗
32. Insulator to semimetal transition in graphene oxide10.1021/jp9051402 ↗
33. Solution‐processable reduced graphene oxide as a novel alternative to PEDOT: PSS hole transport layers for highly efficient and stable polymer solar cells10.1002/adma.201102207 ↗
34. Efficient inverted-type perovskite solar cells using UV-ozone treated MoOx and WOx as hole transporting layers10.1016/j.solener.2016.10.005 ↗
35. UV/ozone‐treated WS2 hole‐extraction layer in organic photovoltaic cells10.1002/pssr.201409165 ↗
36. Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT: PSS as the hole transport layer10.1021/am500336s ↗
37. Ultraviolet-ozone-treated PEDOT: PSS as anode buffer layer for organic solar cells10.1186/1556-276X-7-465 ↗
38. Moderately reduced graphene oxide via UV-ozone treatment as hole transport layer for high efficiency organic solar cells10.1016/j.orgel.2018.04.050 ↗
39. Graphene oxide by UV-ozone treatment as an efficient hole extraction layer for highly efficient and stable polymer solar cells10.1021/acsami.7b05422 ↗
40. Bulk Heterojunction organic solar cells with Graphene oxide hole transport layer: effect of varied concentration on photovoltaic performance10.1021/acs.jpcc.6b10545 ↗
41. Chemically modified graphene oxides as a hole transport layer in organic solar cells10.1039/c2cc33829g ↗
42. Ultraviolet light–ozone treatment of poly (3, 4-ethylenedioxy-thiophene)-based materials resulting in increased work functions10.1016/j.tsf.2006.07.005 ↗
43. High performance organic photovoltaics with zinc oxide and graphene oxide buffer layers10.1039/C3NR04709A ↗
44. High-performance polymer solar cells with moderately reduced graphene oxide as an efficient hole transporting layer10.1016/j.solmat.2012.05.024 ↗
45. Hydrothermal reduction of graphene oxide; effect on surface‐enhanced Raman scattering10.1002/jrs.4998 ↗
46. Atomic force and scanning tunneling microscopy imaging of graphene nanosheets derived from graphite oxide10.1021/la804216z ↗
47. High-performance polymer solar cells with radiation-induced and reduction-controllable reduced graphene oxide as an advanced hole transporting material10.1016/j.carbon.2014.07.073 ↗
48. UV irradiation synthesis of an Au–graphene nanocomposite with enhanced electrochemical sensing properties10.1039/c3ta11155e ↗
49. A practical carbon dioxide gas sensor using room-temperature hydrogen plasma reduced graphene oxide10.1016/j.snb.2013.12.017 ↗
50. The effect of UV ozone treatment on poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate)10.1063/1.3257382 ↗
51. XPS studies of the oxygen 1s and 2s levels in a wide range of functional polymers10.1021/ac00059a006 ↗
52. Conductivity enhancement of poly (3, 4-ethylenedioxythiophene)-poly (styrenesulfonate) films post-spincasting10.1063/1.4768265 ↗
53. Effect of UV–ozone treatment on electrical properties of PEDOT: PSS film10.1016/j.orgel.2010.11.009 ↗
54. Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
55. Britannica · 2009
56. Thermal degradation mechanisms of PEDOT: PSS10.1016/j.orgel.2008.10.008 ↗
57. XPS analysis of the improved operational stability of organic solar cells using a V2O5 and PEDOT: PSS composite layer: effect of varied atmospheric conditions10.1021/acs.jpcc.6b13016 ↗
58. Finding the lost open-circuit voltage in polymer solar cells by UV-ozone treatment of the nickel acetate anode buffer layer10.1021/am5017705 ↗
59. The effects of ultraviolet-ozone-treated ultra-thin MnO-doped ZnO film as anode buffer layer on the electrical characteristics of organic light-emitting diodes10.1063/1.4935414 ↗
60. Wide memory window in graphene oxide charge storage nodes10.1063/1.3383234 ↗
61. Graphene oxide nanosheets based organic field effect transistor for nonvolatile memory applications
62. Defect scattering in graphene10.1103/PhysRevLett.102.236805 ↗
63. Effect of extended polymer chains on properties of transparent graphene nanosheets conductive film10.1039/c1jm13790e ↗
64. Organic solar cells using a reduced graphene oxide anode buffer layer10.1016/j.solmat.2012.12.001 ↗
65. Fluorinated reduced graphene oxide as an efficient hole-transport layer for efficient and stable polymer solar cells10.1021/acsomega.7b00408 ↗
66. Self-doped conjugated polyelectrolyte with tuneable work function for effective hole transport in polymer solar cells10.1039/C6TA04989C ↗
67. Effects of UV light-irradiated buffer layer on the performance of polymer solar cells10.1016/j.orgel.2009.09.010 ↗
68. Efficiency improvement of fluorescent OLEDs by tuning the working function of PEDOT: PSS using UV–ozone exposure10.1016/j.orgel.2010.02.014 ↗
69. Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity10.1021/cm100477v ↗