journal article·2016-05

A red tandem organic light-emitting diode based on organic photovoltaic-type charge generation layer

Dan Zhao, Huihui Liu, Yanqin Miao, Hua Wang, Bo Zhao, Yuying Hao, Furong Zhu, Bingshe Xu

Publisher page

Abstract

Abstract In this paper, a significant enhancement in current efficiency of a red tandem organic light-emitting diode (OLED), which is based on an organic photovoltaic-type charge generation layer (CGL) of fullerene carbon 60/copper (Ⅱ) phthalocyanine, is introduced. The CGL can absorb a part of photons, radiated from emission zone, then form excitons, which are dissociated into free charges. It induces in lower driven voltage and better efficiency of tandem OLED. Compared with single emitter-unit OLED and tandem OLED with bulk heterojunction CGL, the luminous efficiency boosts remarkably with increasing current density and shows rather slower roll-off. Our results demonstrate that the organic photovoltaic heterojunction, consists of two matched n- and p-type organic semiconductors, is a promising CGL for tandem OLEDs with high efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Electroluminescent materials for white organic light emitting diodes10.1039/c0cs00204f ↗
2. Efficient flexible phosphorescent polymer light-emitting diodes based on silver nanowire-polymer composite electrode10.1002/adma.201103180 ↗
3. Vapor-phase microprinting of multicolor phosphorescent organic light emitting device arrays10.1002/adma.201204410 ↗
4. Efficiency roll-off in organic light-emitting diodes10.1002/adma.201301603 ↗
5. White stacked electrophosphorescent organic light-emitting devicesemploying MoO3 as a charge-generation layer10.1002/adma.200501915 ↗
6. Interface studies of intermediate connectors and their roles in tandem OLEDs10.1039/B921699E ↗
7. Power efficiency improvement in a tandem organic light-emitting diode10.1063/1.2938269 ↗
8. High efficiency tandem organic light-emitting devices with Al/WO3/Au interconnecting layer10.1063/1.2787877 ↗
9. Influences of connecting unit architecture on the performance of tandem organic light-emitting devices10.1002/adfm.200600642 ↗
10. White organic light-emitting diodes based on tandem structures10.1063/1.2120898 ↗
11. Organic semiconductor heterojunction as charge generation layer in tandem organic light-emitting diodes for high power efficiency10.1016/j.orgel.2012.03.013 ↗
12. Charge generation layer in stacked organic light-emitting devices10.1063/1.2942408 ↗
13. Tandem organic light-emitting diode using hexaazatriphenylene hexacarbonitrile in the intermediate connector10.1002/adma.200700454 ↗
14. The role of charge generation layers in the operational stability of tandem organic light-emitting diodes10.1039/c3tc32023e ↗
15. The relationship between the electric field-induced dissociation of charge transfer excitons and the photocurrent in small molecular/polymeric solar cells10.1021/jz100121t ↗
16. Efficient tandem organic light-emitting device based on photovoltaic-type connector with positive cycle10.1063/1.4773591 ↗
17. Organic semiconductor heterojunction as charge generation layer in tandem organic light-emitting diodes for high power efficiency10.1016/j.orgel.2012.03.013 ↗
18. Highly efficient tandem white organic light-emitting diodes based upon C60/NaT4 organic heterojunction as charge generation layer10.1039/c2jm30557g ↗
19. Tandem organic light-emitting diodes with KBH4 doped 9,10-bis(3-(pyridine-3-yl)phenyl) anthracene connected to the charge generation layer10.1364/OE.20.014564 ↗
20. High power efficiency tandem organic light-emitting diodes based on bulk heterojunction organic biopolar charge generation layer10.1063/1.3599557 ↗
21. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
22. Effect of in situ annealing on the performance of spray coated polymer solar cells10.1016/j.solmat.2013.01.011 ↗