Energy level modulation of ITIC derivatives: Effects on the photodegradation of conventional and inverted organic solar cells
Source abstract
Abstract
Next-generation organic photovoltaic technology is currently geared towards non-fullerene organic solar cells. Among the non-fullerene small molecule acceptors, ITIC derivatives play a central role with power conversion efficiency above 15% in single junction cells. However, knowledge about the stability of these new types of devices is lagging behind, creating an efficiency-lifetime gap for commercial viability. Here, we study the photostability of three ITIC derivatives, namely ITIC together with IT-M and IT-F, representative of methylated and halogenated ITIC, the usual modification to this small molecule acceptor. While the best performing solar cell yields a PCE of 8.6%, we find that the photostability of the devices greatly depends on the structure of the acceptor and the configuration of the devices. The methylation of ITIC into IT-M improves Voc but does not greatly affect the photostability of the devices. While fluorination generally decreases the efficiency of the cells, the stability of the fluorinated ITIC-based cells appears to depend on the device structure. Thus, the change from ITIC to IT-F may not in all cases necessarily be beneficial to the advancement of the technology. Subtle changes in molecular structure coupled with imbalance charge mobilities is at the origin of the observed differences in degradation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Organic and solution-processed tandem solar cells with 17.3% efficiency
2. Strong polymer molecular weight-dependent material interactions: impact on the formation of the polymer/fullerene bulk heterojunction morphology10.1039/C7TA03052E ↗
3. A highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer10.1002/adma.201801801 ↗
4. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
5. Nonfullerene small-molecule acceptors with perpendicular side-chains for fullerene-free solar cells10.1039/C8TA04718A ↗
6. PDI derivative through fine-tuning the molecular structure for fullerene-free organic solar cells10.1021/acsami.7b08282 ↗
7. A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells †10.1039/C5TC00865D ↗
8. The role of fullerenes in the environmental stability of polymer:fullerene solar cells10.1039/C7EE02983G ↗
9. Burn-in free nonfullerene-based organic solar cells
10. An efficient, “burn in” free organic solar cell employing a nonfullerene electron acceptor10.1002/adma.201701156 ↗
11. Robust nonfullerene solar cells approaching unity external quantum efficiency enabled by suppression of geminate recombination10.1038/s41467-018-04502-3 ↗
12. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
13. Thermally stable All-polymer solar cells with high tolerance on blend ratios
14. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor
15. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
16. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
17. Polymer photovoltaic cells - enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
18. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
19. Efficient polymer solar cells based on non-fullerene acceptors with potential device lifetime approaching 10 years
20. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
21. Photo-stability of fullerene and non-fullerene polymer solar cells: the role of the acceptor10.1021/acsami.8b20493 ↗
22. 1,8-Diiodooctane acts as a photo-acid in organic solar cells10.1038/s41598-019-40948-1 ↗
23. Lifetime of organic photovoltaics: status and predictions10.1002/aenm.201501208 ↗
24. An optimal driving force for converting excitons into free carriers in excitonic solar cells10.1021/jp302275z ↗
25. Morphology control enables thickness-insensitive efficient nonfullerene polymer solar cells
26. High-efficiency nonfullerene organic solar cells: critical factors that affect complex multi-length scale morphology and device performance10.1002/aenm.201602000 ↗
27. Correction to: an alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses
28. Effect of UV-ozone process on the ZnO interlayer in the inverted organic solar cells10.1039/C6RA25177C ↗
29. Relating polymer chemical structure to the stability of polymer:fullerene solar cells10.1039/C7TC01455D ↗
30. Competition between recombination and extraction of free charges determines the fill factor of organic solar cells10.1038/ncomms8083 ↗
31. Towards reliable charge-mobility benchmark measurements for organic semiconductors10.1016/j.orgel.2014.02.008 ↗
32. Bis-silicon-bridged stilbene: a core for small-molecule electron acceptor for high-performance organic solar cells10.1021/acs.chemmater.7b04930 ↗
33. A highly efficient polymer non-fullerene organic solar cell enhanced by introducing a small molecule as a crystallizing-agent10.1016/j.mattod.2017.10.003 ↗
34. High shunt resistance in polymer solar cells comprising a MoO3 hole extraction layer processed from nanoparticle suspension10.1063/1.3601921 ↗
35. The effect of molybdenum oxide interlayer on organic photovoltaic cells
36. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
37. Effect of molybdenum oxide electronic structure on organic photovoltaic device performance: an X-ray absorption spectroscopy study10.1021/jp508972v ↗
38. Efficient, air-stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗