journal article·2019-02Open access

A multipurpose conjugated polymer: Electrochromic device and biosensor construction for glucose detection

Saniye Soylemez, Hava Zekiye Kaya, Yasemin A. Udum, Levent Toppare

Abstract

Abstract First example of electrochemically polymerized thiazolothiazole containing electrochromic conducting polymer; Poly(2,5-di(furan-2-yl)thiazolo[5,4-d]thiazole) (PTTzFr) was obtained via cyclic voltammetry. The polymer structure bears furan unit as the donor and thiazolothiazole unit as the acceptor. PTTzFr film was obtained on an ITO coated glass slide and its electrochemical and optoelectronic properties were investigated. Polymeric film showed reversible redox behavior along with reversible electrochromic behavior from reddish orange to grey having a band gap value of 1.80 eV. It has fast switching times (0.3 s and 0.4 s) with high optical contrast values at visible and NIR regions (38% at 460 nm and 63% at 1225 nm). Optoelectronic device application was performed by constructing a dual type electrochromic device (ECD) with poly(3,4-ethylenedioxythiophene) (PEDOT). Resulting device showed a remarkable optical memory without changing its % transmittance value during 200 s at 450 nm. Additionally, to construct a sensing interface, in the present work, a conjugated polymer (PTTzFr) containing biosensor was constructed for the glucose analysis. The architecture showed a promising sensing system for biosensor application. For the preparation of the proposed sensor, polymer film was coated on graphite electrode surface and fabricated as a glucose biosensor with immobilization of glucose oxidase. The biosensor was successfully applied for the determination of glucose in beverage. Under optimized conditions, the proposed sensor served a low detection limit (12.8 × 10−3 mM), and high sensitivity (65.44 μAmM−1cm−2). To the best of our knowledge, a sensor design and ECD construction using electrochemically polymerized PTTzFr that shows superior properties for both systems were attempted for the first time, and this approach resulted in improved biosensor and ECD characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Electrochemical sensors and biosensors · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Indacenodithiophene-based D-A conjugated polymers for application in polymer solar cells10.1016/j.orgel.2017.06.059 ↗
2. A selection rule of solvent for highly aligned diketopyrrolopyrrole-based conjugated polymer film for high performance organic field-effect transistors10.1016/j.orgel.2018.01.006 ↗
3. Poly(thieno[3,4-b]-1,4-oxathiane): medium effect on electropolymerization and electrochromic performance10.1021/la503948f ↗
4. Influence of monomer concentration during polymerization on performance and catalytic mechanism of resultant poly(3,4-ethylenedioxythiophene) counter electrodes for dye-sensitized solar cells10.1016/j.electacta.2015.05.130 ↗
5. Icolor electrochromism of copolymer based on selenophene and 3,4-ethylenedioxythiophene10.1016/j.synthmet.2012.11.026 ↗
6. Synthesis and photovoltaic properties of cyclopentadithiophene-based low-band gap copolymers that contain electron-withdrawing thiazole derivatives10.1002/chem.200903064 ↗
7. Synthesis, physical properties, and field-effect transistors of novel thiophene/thiazolothiazole co-oligomers10.1039/b403699a ↗
8. Physical properties and field-effect transistors based on novel thiazolothiazole/heterocyclic and thiazolothiazole/phenylene co-oligomers10.1016/j.synthmet.2005.12.014 ↗
9. Synthesis, physical properties and field-effect transistors of novel thiazolothiazole–phenylene co-oligomers10.1039/B611814C ↗
10. Efficiency nonfullerene polymer solar cells with thick active layer and large area10.1002/adma.201702291 ↗
11. Copolymers based on thiazolothiazole-dithienosilole as hole-transporting materials for high efficient perovskite solar cells10.1016/j.orgel.2016.03.020 ↗
12. Spray-processable thiazolothiazole based copolymers with altered donor groups and their electrochromic properties10.1002/pola.26791 ↗
13. Multichromic and soluble conjugated polymers containing thiazolothiazole unit for electrochromic applications10.1016/j.eurpolymj.2014.12.028 ↗
14. Inzelt · 2008 · 123
15. Biomolecule immobilization on electrode surfaces by entrapment or attachment to electrochemically polymerized films10.1016/S0956-5663(99)00024-X ↗
16. Electrochemical sensors based on conducting polymer—polypyrrole10.1016/j.electacta.2005.11.052 ↗
17. Carbon nanotube based biosensors10.1016/j.snb.2014.10.040 ↗
18. Novel poly(2,5-dithienylpyrrole) (PSNS) derivatives functionalized with azobenzene, coumarin and fluorescein chromophore units:spectroelectrochemical properties and electrochromic device applications10.1039/C4NJ02098G ↗
19. Fabricating multicolored electrochromic devices using conducting copolymers10.1088/0964-1726/22/11/115022 ↗
20. Synthesis and electro-optical properties of new conjugated hybrid polymers based on furan and fluorine units10.1016/j.electacta.2012.11.108 ↗
21. One polymer for all: benzotriazole containing donor–acceptor type polymer as a multi-purpose material10.1039/b912482a ↗
22. Synthesis, polymerization, and unusual properties of new star-shaped thiophene oligomers10.1021/ol901127q ↗
23. Conducting polyfurans by electropolymerization of oligofurans10.1039/C4SC02664K ↗
24. Electrochemical and optical studies of furan and thieno[3,2-b]thiophene end capped benzotriazole derivatives10.1002/pola.24375 ↗
25. Tuning the optoelectronic properties of polyfuran by design of furan-EDOT monomers and free-standing films with enhanced redox stability and electrochromic performances10.1016/j.electacta.2014.09.034 ↗
26. Asymmetric star-shaped functionalized triazine architecture and its electrochromic device application10.1149/2.0731707jes ↗
27. Applications of three dithienylpyrroles-based electrochromic polymers in high-contrast electrochromic devices10.3390/polym9030114 ↗
28. Synthesis of highly branched conducting polymer architecture for electrochromic applications10.1016/j.polymer.2017.11.067 ↗
29. Electrochemistry, polymers and opto-electronic devices: a combination with a future
30. Enhancing biosensor properties of conducting polymers via copolymerization: synthesis of EDOT-substituted bis(2-pyridylimino) isoindolato-palladium complex and electrochemical sensing of glucose by its copolymerized film10.1016/j.bios.2016.08.020 ↗
31. Immobilization of glucose oxidase and platinum on mesoporous silica nanoparticles for the fabrication of glucose biosensor10.1016/j.electacta.2010.12.098 ↗
32. An amperometric glucose biosensor based on layer-by-layer GOx-SWCNT conjugate/redox polymer multilayer on a screen-printed carbon electrode10.1016/j.snb.2010.10.034 ↗
33. Glucose biosensor from covalent immobilization of chitosan-coupled carbon nanotubes on polyaniline-modified gold electrode10.1021/am100591t ↗
34. Covalent immobilization of glucose oxidase on the film prepared by electrochemical polymerization of N-phenylglycine for amperometric glucose sensing10.1016/j.eurpolymj.2013.12.005 ↗
35. Composite material based on macroporous polyaniline and osmium redox complex for biosensor development10.1002/elan.201400021 ↗
36. Poly 3,4-ethylenedioxythiophene as an entrapment support for amperometric enzyme sensor10.1016/S0928-4931(02)00060-7 ↗