Inverted vs standard PTB7:PC70BM organic photovoltaic devices. The benefit of highly selective and extracting contacts in device performance
Source abstract
Abstract
In this work we compare the photovoltaic performance of different cell designs, standard and inverted, for one of the most promising systems to achieve power conversion efficiencies over 10% in polymer:fullerene single cells, namely PTB7:PC70BM. Impedance spectroscopy, charge extraction and transient photovoltage are used in order to assign the electrical losses initially observed in the current density–voltage curve and understand the main limitation of every design. While inverted devices show competitive performance in terms of charge generation, transport of carriers and also for charge collection at electrodes, standard devices present additional resistive losses that are assigned to charge transfer issues at the active layer/anode interface. This additional resistance increase the overall series resistance of devices, lowers the fill factor and it is the ultimate responsible for the observed reduced device performance of standard cells in comparison to inverted ones. In this way, devices over 7.2% are reported with ZnO and MoO3 as interlayer electrodes that act as improved highly selective and extracting contacts in comparison to standard PEDOT:PSS and Ca/Ag. Contacts are thus electrically optimized. Additional improvement of device performance must consider enhancement of intrinsic recombination properties of the blend. Lower molecular weights and/or any residual catalyst impurities with respect to other batches are the only limitation to reach record efficiencies as those shown in recent works.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
2. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
3. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
4. High-performance polymer solar cells using an optically enhanced architecture10.1002/adom.201200027 ↗
5. Morphology evolution via self-organisation and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗
6. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
7. Inverted ITO-free organic solar cells based on p and n semiconducting oxides. New designs for integration in tandem cells, top or bottom detecting devices, and photovoltaic windows10.1039/C0EE00318B ↗
8. Recombination dynamics as a key determinant of open circuit voltage in organic bulk heterojunction solar cells: a comparison of four different donor polymers10.1002/adma.201002360 ↗
9. Measurements of efficiency losses in blend and bilayer-type zinc phthalocyanine/C60 high-vacuum-processed organic solar cells10.1021/jp3054422 ↗
10. Recombination in organic bulk heterojunction solar cells: small dependence of interfacial charge transfer kinetics on fullerene affinity10.1021/jz3003958 ↗
11. Charge carrier transport and contact selectivity limit the operation of PTB7-based organic solar cells of varying active layer thickness10.1039/c3ta12358h ↗
12. Interplay between fullerene surface coverage and contact selectivity of cathode interfaces in organic solar cells10.1021/nn4014593 ↗
13. Series resistance in organic bulk-heterojunction solar devices: modulating carrier transport with fullerene electron traps10.1016/j.orgel.2012.06.043 ↗
14. Physical chemical principles of photovoltaic conversion with nanoparticulate, mesoporous dye-sensitized solar cells10.1021/jp0359283 ↗
15. Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopy10.1016/j.solmat.2009.10.015 ↗
16. Nongeminate recombination dynamics-device voltage relationship in hybrid PbS quantum dot/C60 solar cells10.1021/jp4059824 ↗
17. Enhanced absorbance and electron collection in inverted organic solar cells: optical admittance and transient photocurrent analyses10.1016/j.orgel.2014.03.032 ↗
18. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗