journal article·2018-03

Sputtered indium zinc oxide rear electrodes for inverted semitransparent perovskite solar cells without using a protective buffer layer

Tina Wahl, Jonas Hanisch, Sven Meier, Moritz Schultes, Erik Ahlswede

Publisher page

Abstract

Abstract In this work, we demonstrate inverted semitransparent perovskite solar cells (PSC) comprising an indium zinc oxide (IZO) layer sputtered at room temperature without a protective buffer layer between the organic electron transport layers (ETL) and the transparent sputtered electrode. The damage done to the ETL layer during sputtering is cured with a short annealing step at a moderate temperature and semitransparent PSCs with fill factors of almost 70% and with power conversion efficiencies (PCE) over 13% are achieved with negligible hysteresis. We investigate the influence of the layer thicknesses of the ETL double layer consisting of PCBM and BCP on the solar cell characteristics as well as the influence of the illumination direction of the bifacial device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
2. Efficient near-infrared-transparent perovskite solar cells enabling direct comparison of 4-terminal and monolithic perovskite/silicon tandem cells10.1021/acsenergylett.6b00254 ↗
3. Rubidium multication perovskite with optimized bandgap for perovskite-silicon tandem with over 26% efficiency10.1002/aenm.201700228 ↗
4. High-efficiency inverted semi-transparent planar perovskite solar cells in substrate configuration10.1038/nenergy.2016.190 ↗
5. Efficient semitransparent perovskite solar cells for 23.0%-efficiency perovskite/silicon four-terminal tandem cells10.1002/aenm.201601128 ↗
6. Thermal and environmental stability of semi-transparent perovskite solar cells for tandems enabled by a solution-processed nanoparticle buffer layer and sputtered ITO electrode10.1002/adma.201505279 ↗
7. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability10.1038/nenergy.2017.9 ↗
8. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
9. Four-terminal perovskite/silicon multijunction solar modules10.1002/aenm.201602807 ↗
10. High-efficiency polycrystalline thin film tandem solar cells10.1021/acs.jpclett.5b01108 ↗
11. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications10.1038/ncomms9932 ↗
12. Efficient monolithic perovskite/silicon tandem solar cell with cell area > 1 cm210.1021/acs.jpclett.5b02686 ↗
13. High-performance semitransparent perovskite solar cells with solution-processed silver nanowires as top electrodes10.1039/C4NR06033D ↗
14. Semi-transparent perovskite solar cells for tandems with silicon and CIGS10.1039/C4EE03322A ↗
15. Self-encapsulating thermostable and air-resilient semitransparent perovskite solar cells10.1002/aenm.201602599 ↗
16. Efficient semi-transparent planar perovskite solar cells using a ‘molecular glue’10.1016/j.nanoen.2016.10.044 ↗
17. Sputtered rear electrode with broadband transparency for perovskite solar cells10.1016/j.solmat.2015.06.024 ↗
18. Application of indium zinc oxide window layers in Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2016.08.026 ↗
19. Indium zinc oxide window layer for high-efficiency Cu(In,Ga)Se2 solar cells10.1016/j.tsf.2017.02.018 ↗
20. Influence of gap states on electrical properties at interface between bathocuproine and various types of metal10.1063/1.3309278 ↗
21. A solution-processed bathocuproine cathode interfacial layer for high-performance bromine–iodine perovskite solar cells10.1039/C5CP03995A ↗
22. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
23. T. Wahl, not published.
24. Influence of cathode sputter deposition on organic solar cells10.1063/1.2472719 ↗
25. All-sputtered contacts for organic solar cells10.1016/j.tsf.2007.12.036 ↗
26. Contacts for semitransparent organic solar cells10.1051/epjap:2007041 ↗
27. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
28. Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells10.1039/C7RA06365B ↗
29. Novel cathode buffer layer of Ag-doped bathocuproine for small molecule organic solar cell with inverted structure10.1016/j.orgel.2014.04.030 ↗