Printed ion-gel transistor using electrohydrodynamic (EHD) jet printing process
Source abstract
Abstract
Abstract An ion-gel-based transistor was fabricated using an electrohydrodynamic (EHD) jet printing process. In general, EHD jet printing is operated in four jetting modes: dripping, micro-dripping, cone-jet and multi-jet ones. Both poly(3-hexylthiophene-2,5-diyl) (P3HT) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), as a semiconductor and a gate electrode, respectively, enable successful printing in cone-jet mode and the resulting pattern widths are about 10 μm (P3HT) and 200 μm (PEDOT:PSS). On the other hand, the ion-gel electrolyte cannot be printed in cone-jet mode because of the excessive number of ions in the ink that perturb the fluidic behavior. Therefore, dripping mode was used to produce an ion-gel pattern under the application of a very low voltage, which is referred to as electrostatic-force-assisted dispensing printing. This method could make good patterns of an ion-gel and allow the fabrication of an ion-gel-based transistor. The EHD jet-printed transistor exhibited an average mobility ( μ ), threshold voltage ( V th ), on/off current ratio ( I on / I off ) and subthreshold swing ( SS ) of 0.12 ± 0.05 cm2/Vs, −0.83 ± 0.1 V, ∼10 5 and 73 ± 11 mV/decade, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Mass Spectrometry Techniques and Applications · Electrowetting and Microfluidic Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. σ-π molecular dielectric multilayers for low-voltage organic thin-film transistors10.1073/pnas.0501027102 ↗
2. High-mobility bottom-contact n-channel organic transistors and their use in complementary ring oscillators10.1063/1.2177627 ↗
3. Polymer gate dielectric surface viscoelasticity modulates pentacene transistor performance10.1126/science.1146458 ↗
4. Contact-induced crystallinity for high-performance soluble acene-based transistors and circuits10.1038/nmat2122 ↗
5. High-performance organic field-effect transistors10.1002/adma.200802733 ↗
6. Solution coating of the large-area organic semiconductor thin films with aligned single-crystalline domains10.1038/nmat3650 ↗
7. Ion gels prepared by in situ radical polymerization of vinyl monomers in an ionic liquid and their characterization as polymer electrolytes10.1021/ja045155b ↗
8. Ion gel-gated polymer thin-film transistors: operating mechanism and characterization of gate dielectric capacitance, switching speed, and stability10.1021/jp901426e ↗
9. Self-assembly of block copolymer micelles in an ionic liquid10.1021/ja058091t ↗
10. Highly flexible MoS2 thin-film transistors with ion gel dielectrics10.1021/nl301335q ↗
11. Soluble and processable regioregular poly (3-hexylthiophene) for thin film field-effect transistor applications with high mobility10.1063/1.117834 ↗
12. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
13. Downscaling of self-aligned, all-printed polymer thin-film transistors10.1038/nnano.2007.365 ↗
14. Organic materials for printed electronics10.1038/nmat1817 ↗
15. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
16. All-polymer capacitor fabricated with inkjet printing technique10.1016/S0038-1101(03)00082-0 ↗
17. Spatially-correlated neuron transistors with ion-gel gating for brain-inspired applications10.1016/j.orgel.2017.02.004 ↗
18. Self-recovering tough gel electrolyte with adjustable supercapacitor performance10.1002/adma.201400240 ↗
19. Poly (ethylene oxide)-co-poly (propylene oxide)-based gel electrolyte with high ionic conductivity and mechanical integrity for lithium-ion batteries10.1021/am4019115 ↗
20. Solution processable, electrochromic ion gels for sub-1 V, flexible displays on plastic10.1021/acs.chemmater.5b00026 ↗
21. A high-performance graphene oxide-doped ion gel as gel polymer electrolyte for all-solid-state supercapacitor applications10.1002/adfm.201203556 ↗
22. High charge carrier densities and conductance maxima in single-crystal organic field-effect transistors with a polymer electrolyte gate dielectric10.1063/1.2204846 ↗
23. High-density electrostatic carrier doping in organic single-crystal transistors with polymer gel electrolyte10.1063/1.2186513 ↗
24. High-density electrostatic carrier doping in organic single-crystal transistors with polymer gel electrolyte10.1063/1.2387884 ↗
25. Polymer electrolyte gate dielectric reveals finite windows of high conductivity in organic thin film transistors at high charge carrier densities10.1021/ja051579+ ↗
26. Beyond the metal-insulator transition in polymer electrolyte gated polymer field-effect transistors10.1073/pnas.0605033103 ↗
27. Polymer electrolyte gating of carbon nanotube network transistors10.1021/nl0503781 ↗
28. Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic10.1038/nmat2291 ↗
29. Flight behavior of charged droplets in electrohydrodynamic inkjet printing10.1063/1.3280077 ↗
30. Mechanism of electrohydrodynamic printing based on ac voltage without a nozzle electrode10.1063/1.3126957 ↗
31. Electrohydrodynamic spraying functioning modes: a critical review10.1016/0021-8502(94)90199-6 ↗
32. Pole-type ground electrode in nozzle for electrostatic field induced drop-on-demand inkjet head10.1016/j.sna.2007.08.019 ↗
33. Drop-on-demand printing of conductive ink by electrostatic field induced inkjet head10.1063/1.3020719 ↗
34. Mechanism of electrohydrodynamic printing based on ac voltage without a nozzle electrode10.1063/1.3126957 ↗
35. Electrohydrodynamic atomization in the cone–jet mode physical modeling of the liquid cone and jet10.1016/S0021-8502(99)00033-6 ↗
36. Effects of polymer properties on jetting performance of electrohydrodynamic printing10.1002/app.45044 ↗
37. High-resolution ac-pulse modulated electrohydrodynamic jet printing on highly insulating substrates10.1088/0960-1317/24/4/045010 ↗
38. Electrospinning process and applications of electrospun fibers10.1016/0304-3886(95)00041-8 ↗
39. Characterization of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) thin film deposited through electrohydrodynamic atomization technique10.1016/j.matlet.2012.05.127 ↗
40. Novel low voltage EHD spray nozzle for atomization of water in the cone jet mode10.1016/j.elstat.2006.11.004 ↗
41. Influence of a novel fluorosurfactant modified PEDOT: PSS hole transport layer on the performance of inverted organic solar cells10.1039/c2jm35646e ↗
42. Electrostatic-force-assisted dispensing printing to construct high-aspect-ratio of 0.79 electrodes on a textured surface with improved adhesion and contact resistivity10.1038/srep16704 ↗
43. Displacement current measurement as a tool to characterize organic field effect transistors10.1016/j.synthmet.2005.07.267 ↗
44. Performance and stability of aerosol-jet-printed electrolyte-gated transistors based on poly(3-hexylthiophene)10.1021/am401200y ↗
45. Electrolyte-gated transistors for organic and printed electronics10.1002/adma.201202790 ↗
46. Sze · 1981
47. Current versus gate voltage hysteresis in organic field effect transistors10.1007/s00706-009-0149-z ↗
48. Electron traps and hysteresis in pentacene-based organic thin-film transistors10.1063/1.2146059 ↗