journal article·2016-12

Moderately reduced graphene oxide/PEDOT:PSS as hole transport layer to fabricate efficient perovskite hybrid solar cells

Xu Huang, Heng Guo, Jian Yang, Kai Wang, Xiaobin Niu, Xiaobo Liu

Publisher page

Abstract

Abstract Graphene oxide (GO) with single layer was moderately reduced at 200 °C for 4 h under N 2 . Then the moderately reduced graphene oxide (rGO) water solution was employed as an additive to tune the properties of conventional poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) solution. It's found that the incorporation of rGO into PEDOT:PSS nearly did not change its transparency, hydrophilic property, or the surface roughness. So, the rGO/PEDOT:PSS composite was used as a hole transport layer (HTL) to fabricate perovskite solar cells (PSCs). As a result, PSCs with rGO/PEDOT:PSS as HTL exhibit improved power conversion efficiency than that of PSCs with PEDOT:PSS as HTL. Our findings show that moderately reduced rGO/PEDOT:PSS could be an efficient HTL to improve power conversion efficiency of PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells10.1126/science.aaf8060 ↗
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Improved hole interfacial layer for planar perovskite solar cells with efficiency exceeding 15
4. A hydrophobic hole transporting oligothiophene for planar perovskite solar cells with improved stability10.1039/C4CC04680C ↗
5. High-performance hole-extraction layer of Sol–Gel-processed NiO nanocrystals for inverted planar perovskite solar cells &dagger10.1002/ange.201405176 ↗
6. Low-temperature-processed efficient semi-transparent planar perovskite solar cells for bifacial and tandem applications
7. Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells10.1039/C4EE02833C ↗
8. Unraveling the nanoscale morphologies of mesoporous perovskite solar cells and their correlation to device performance10.1021/nl5006838 ↗
9. Finely tailored performance of inverted organic photovoltaics through layer-by-layer interfacial engineering10.1021/am200849r ↗
10. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
11. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
12. Bimolecular recombination losses in polythiophene: fullerene solar cells10.1103/PhysRevB.78.113201 ↗
13. A review of charge transport and recombination in polymer/fullerene organic solar cells10.1002/pip.791 ↗
14. Bimolecular recombination coefficient as a sensitive testing parameter for low-mobility solar-cell materials10.1103/PhysRevLett.94.176806 ↗
15. Influence of a novel fluorosurfactant modified PEDOT: PSS hole transport layer on the performance of inverted organic solar cells10.1039/c2jm35646e ↗
16. Electron transport in a methanofullerene10.1002/adfm.200390004 ↗
17. Self-assembled monolayer modification of PEDOT: PSS interface to improve the device performance in blue PLED
18. Inverted quantum-dot light emitting diode using solution processed p-type WOx doped PEDOT: PSS and Li doped ZnO charge generation layer10.1021/acsami.5b06505 ↗
19. Graphene oxide/PEDOT: PSS and reduced graphene oxide/PEDOT: PSS hole extraction layers in organic photovoltaic cells10.1002/pssa.201228040 ↗
20. IR electrochromic WO 3 thin films: from optimization to devices10.1016/j.solmat.2009.05.003 ↗
21. Measurement of the elastic properties and intrinsic strength of monolayer graphene10.1126/science.1157996 ↗
22. High-performance polymer solar cells with moderately reduced graphene oxide as an efficient hole transporting layer10.1016/j.solmat.2012.05.024 ↗
23. Solution-processable reduced graphene oxide as a novel alternative to PEDOT: PSS hole transport layers for highly efficient and stable polymer solar cells10.1002/adma.201102207 ↗
24. Effect of solution processed graphene oxide/nickel oxide bi-layer on cell performance of bulk-heterojunction organic photovoltaic10.1016/j.solmat.2011.06.008 ↗
25. Graphene oxide/PEDOT: PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells10.1039/C5NR05271H ↗
26. Efficient perovskite hybrid solar cells through a homogeneous high-quality organolead iodide layer
27. Chemical reduction of graphene oxide: a synthetic chemistry viewpoint10.1039/C3CS60303B ↗
28. Preparation of graphene by the rapid and mild thermal reduction of graphene oxide induced by microwaves10.1016/j.carbon.2009.11.037 ↗
29. Bulk heterojuntion perovskite hybrid solar cells with large fill-factor10.1039/C5EE00222B ↗
30. The reduction of graphene oxide10.1016/j.carbon.2011.11.010 ↗
31. The effect of the PEDOT: PSS surface energy on the interface potential barrier10.1016/j.synthmet.2011.10.006 ↗
32. Efficient perovskite hybrid solar cells by highly electrical conductive PEDOT: PSS hole transport layer10.1002/aenm.201501773 ↗
33. Charge carrier recombination in organic solar cells10.1016/j.progpolymsci.2013.08.008 ↗
34. Efficient solution-processed bulk heterojunction perovskite hybrid solar cells10.1002/aenm.201402024 ↗
35. Stable and null current hysteresis perovskite solar cells based nitrogen doped graphene oxide nanoribbons hole transport layer
36. Flexible electronics: transparent nanopaper-based flexible organic thin-film transistor array10.1002/adfm.201303024 ↗
37. Nonideal diode behavior and bandgap renormalization in carbon nanotube p-n junctions10.1109/TNANO.2013.2287124 ↗
38. Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor10.1039/C4NR03181D ↗
39. Open circuit voltage enhancement due to reduced dark current in small molecule photovoltaic cells
40. Criteria for improving the properties of ZnGeAs 2 solar cells10.1002/pip.2177 ↗
41. Independent control of bulk and interfacial morphologies of small molecular weight organic heterojunction solar cells10.1021/nl302172w ↗
42. High performance hybrid solar cells sensitized by organolead halide perovskites10.1039/c3ee40343b ↗