journal article·2012-04

Effect of residual catalyst on solar cells made of a fluorene-thiophene-benzothiadiazole copolymer as electron-donor: A combined electrical and photophysical study

Nadia Camaioni, Francesca Tinti, Lorenzo Franco, Marianna Fabris, Antonio Toffoletti, Marco Ruzzi, Luciano Montanari, Lucia Bonoldi, Andrea Pellegrino, Anna Calabrese, Riccardo Po

Organic Electronics· Volume 13· Issue 4
Publisher page

Abstract

The effects of residual catalyst impurities (palladium) on the hole mobility of a fluorene-thiophene-benzothiadiazole copolymer (poly{[4 '-(9,9-bis(2-ethylhexyl)fluoren-2-yl)-2 ',1 ',3 '-benzothiadiazole-7,7 '-diyl]-co-[2 '-(9,9-bis(2-ethylhexyl)fluoren-2-yl)thien-7,5 '-diyl]}) (PFB-co-FT), as well as on its photovoltaic and photophysical response when blended with [6,6]-phenyl-C-61-butyric acid methyl ester (PCBM), are investigated. Two samples of the copolymer, only differing for the Pd content (9 and 3360 ppm), are considered and compared. The transport of positive carriers is characterized by a lower mobility and a higher dispersion in the Pd-rich PFB-co-FT sample. The photovoltaic parameters of PFB-co-FT:PCBM solar cells show a significant dependence on the residual catalyst impurities, attributed to a different concentration of trap states. Variations in charge mobility and trapping induced by impurities was confirmed also by ESR (Electron Spin Resonance) experiments: an increased concentration of trapped charges in the presence of a higher level of metal impurities was revealed by light induced ESR, while the variation of polaron mobility correlates with the lifetime variation of the photogenerated PCBM triplet state detected by time-resolved ESR. All experimental evidences point to a strong effect of Pd impurities on the transport properties of charge carriers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
3. Polymer solar cells: recent approaches and achievements10.1021/jp9061362 ↗
4. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
5. Role of balanced charge carrier transport in low band gap polymer:fullerene bulk heterojunction solar cells10.1002/polb.22243 ↗
6. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
7. Efficient polymer solar cells with thin active layers based on alternating polyfluorene copolymer/fullerene bulk heterojunctions10.1002/adma.200900510 ↗
8. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
9. Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells10.1063/1.2170424 ↗
10. Organic photovoltaic devices produced from conjugated polymer/methanofullerene bulk heterojunctions10.1016/S0379-6779(00)01445-4 ↗
11. Charge transport in organic semiconductors10.1021/cr050140x ↗
12. Polymer electronic materials: a review of charge transport10.1002/pi.2111 ↗
13. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
14. Influence of residual catalyst on the properties of conjugated polyphenylenevinylene materials: palladium nanoparticles and poor electrical performance10.1021/cm035205w ↗
15. Conjugated liquid-crystalline polymers – soluble and fusible poly(phenylenevinylene) by the Heck coupling reaction10.1021/ma00072a002 ↗
16. Nature of impurities in π-conjugated polymers prepared by ferric chloride and their effect on the electrical properties of metal–insulator–semiconductor structures10.1021/cm00052a006 ↗
17. A study of the effects metal residues in poly(9,9-dioctylfluorene) have on field-effect transistor device characteristics10.1016/j.synthmet.2007.08.017 ↗
18. The effects of metal impurities in poly[(2,5-bis(3-decylthiophen-2-yl)-thieno[2,3-b]thiophene] on field-effect transistor properties10.1016/j.orgel.2008.11.005 ↗
19. Impedance measurements as a simple tool to control the quality of conjugated polymers designed for photovoltaic applications10.1002/adfm.201001308 ↗
20. Direct evaluation of intrinsic optoelectronic performance of organic photovoltaic cells with minimizing impurities and degradation effect10.1002/aenm.201100143 ↗
21. Perepichka · 2009 · vol. 1
22. Optimization of PCPDTBT solar cells using polymer synthesis with Suzuki coupling10.1016/j.solmat.2011.03.022 ↗
23. Optical and electronic properties of fluorene/thiophene/benzothiadiazole pseudorandom copolymers for photovoltaic applications10.1007/s10853-011-5321-2 ↗
24. Pope · 1999
25. Nondispersive hole transport in carbazole- and anthracene-containing polyspirobifluorene copolymers studied by the charge-generation layer time-of-flight technique10.1063/1.2168590 ↗
26. Employing ambipolar oligofluorene as the charge-generation layer in time-of-flight mobility measurements of organic thin films10.1063/1.2172708 ↗
27. On the dielectric constant and electrical conductivity of mica in intense field
28. On pre-breakdown phenomena in insulators and electronic semi-conductors10.1103/PhysRev.54.647 ↗
29. Borsenberger · 1998
30. A physical interpretation of dispersive transport in disordered semiconductors10.1016/0038-1098(81)90886-3 ↗
31. Anomalous transit-time dispersion in amorphous solids10.1103/PhysRevB.12.2455 ↗
32. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
33. Effect of traps on the performance of bulk heterojunctions organic solar cells10.1063/1.2821368 ↗
34. Origin of the reduced fill factor and photocurrent in MDMO-PPV:PCNEPV all-polymer solar cells10.1002/adfm.200601110 ↗
35. Photoinduced charge carriers in conjugated polymer–fullerene composites studied with light-induced electron-spin resonance10.1103/PhysRevB.59.8019 ↗
36. Spectroscopy on polymer–fullerene composites and photovoltaic cells10.1016/S0379-6779(00)01156-5 ↗
37. Multifrequency EPR analysis of the positive polaron in I2-doped poly(3-hexylthiophene) and in poly[2-methoxy-5-(3,7-dimethyloctyloxy)]-1,4-phenylenevinylene10.1039/b811419f ↗
38. Photo-induced charge transfer and relaxation of persistent charge carriers in polymer/nanocrystal composites for applications in hybrid solar cells10.1002/adfm.200900852 ↗
39. Short-lived excited triplet states studied by time-resolved EPR spectroscopy10.1016/S1389-5567(03)00024-8 ↗
40. High-frequency (95GHz) electron paramagnetic resonance study of the photoinduced charge transfer in conjugated polymer–fullerene composites10.1103/PhysRevB.64.195206 ↗
41. ESR studies of photogenerated polarons in regioregular poly(3-alkylthiophene)–fullerene composite10.1016/S0379-6779(02)00080-2 ↗
42. Dynamics of photoinduced radical pairs in poly(3-dodecylthiophene)/fullerene composite10.1016/j.physe.2006.08.004 ↗
43. Preferential orientation of fulleropyrrolidine bisadducts in E7 liquid crystal: a time-resolved electron paramagnetic resonance study10.1021/jp9927000 ↗
44. Fullerene derivatives in poly(methyl methacrylate): an EPR and zero-field ODMR study of their photoexcited triplet states10.1021/jp960528j ↗
45. Hirsch · 2005
46. Transient optical studies of charge recombination dynamics in a polymer/fullerene composite at room temperature10.1063/1.1512943 ↗
47. Triplet-polaron quenching in conjugated polymers10.1021/jp075556o ↗