journal article·2019-07

Ammonia-treated graphene oxide and PEDOT:PSS as hole transport layer for high-performance perovskite solar cells with enhanced stability

Yu Wang, Yao Hu, Dongwei Han, Quan Yuan, Tiantian Cao, Ning Chen, Dongying Zhou, Hailin Cong, Lai Feng

Publisher page

Abstract

Abstract Poly(3,4-ethenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) and graphene oxide (GO) as well as their hybrids have been widely used to prepare hole-transport layer (HTL) for inverted planar perovskite solar cells (PeSCs). However, their acidic nature is detrimental to the stability of PeSC. In this study, we report a simple and general strategy to prepare non-corrosive HTL by treating GO and PEDOT:PSS with ammonia or ammonium (i.e., (NH4)2HPO4), respectively. The PeSC based on ammonia-treated GO (a-GO) yields a power conversion efficiency (PCE) over 14%, remarkably outperforming those with pristine GO (∼12%) or PEDOT:PSS (∼13%). Similar improvement is also observed for the devices with ammonia or ammonium-treated PEDOT:PSS. The mechanism behind such improvement is thoroughly studied, demonstrating the significance of ammonia treatment on the HTL performance. More importantly, the devices based on ammonia-treated HTL exhibit significantly improved stability, as compared to those based on pristine PEDOT:PSS and GO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
2. Efficiency Chart, https://www.nrel.gov/pv/assets/images/efficiency-chart-20180716.jpg accessed: July 2018.
3. A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells10.1038/s41560-018-0200-6 ↗
4. A breakthrough efficiency of 19.9% obtained in inverted perovskite solar cells by using an efficient trap state passivator Cu(thiourea)I10.1021/jacs.7b01439 ↗
5. Cesium doped NiOx as an efficient hole extraction layer for inverted planar perovskite solar cells10.1002/aenm.201700722 ↗
6. Efficacious engineering on charge extraction for realizing highly efficient perovskite solar cells10.1039/C7EE02685D ↗
7. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
8. Recent advances in the inverted planar structure of perovskite solar cells10.1021/acs.accounts.5b00404 ↗
9. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
10. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
11. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
12. High-performance metal oxide-free inverted perovskite solar cells using poly(bis(4-phenyl)(2,4,6-trimethylphenyl)amine) as the hole transport layer10.1039/C8TC02241K ↗
13. Copper(I) thiocyanate (CuSCN) hole‐transport layers processed from aqueous precursor solutions and their application in thin‐film transistors and highly efficient organic and organometal halide perovskite solar cells10.1002/adfm.201701818 ↗
14. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%10.1126/science.aam5655 ↗
15. Room-temperature and solution-processed copper iodide as the hole transport layer for inverted planar perovskite solar cells10.1039/C6NR04288K ↗
16. High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer10.1039/C6NR01927G ↗
17. Highly dispersed NiOx nanocrystal for efficient, stable, low‐temperature processable perovskite solar cells10.1002/solr.201800004 ↗
18. Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells10.1039/C7TA01593C ↗
19. High-performance hole-extraction layer of sol-gel-processed NiO nanocrystals for inverted planar perovskite solar cells10.1002/anie.201405176 ↗
20. Poly(3,4‐ethylenedioxythiophene) and its derivatives: past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
21. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
22. Organometal halide perovskite solar cells: degradation and stability10.1039/C5EE02733K ↗
23. Self-doped conducting polymer as a hole-extraction layer in organic–inorganic hybrid perovskite solar cells10.1002/admi.201500678 ↗
24. Control of the surface composition of a conducting‐polymer complex film to tune the work function10.1002/adfm.200700766 ↗
25. WO x@ PEDOT core–shell nanorods: hybrid hole-transporting materials for efficient and stable perovskite solar cells10.1021/acsaem.8b00277 ↗
26. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
27. Modified PEDOT layer makes a 1.52 V Voc for perovskite/PCBM solar cells10.1002/aenm.201601193 ↗
28. Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-doped PEDOT:PSS10.1021/acsami.7b14592 ↗
29. Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT:PSS hole transport layer10.1039/C6TA10212C ↗
30. PEDOT:PSS monolayers to enhance hole extraction and stability of perovskite solar cells10.1039/C8TA05234D ↗
31. Modulation of PEDOT:PSS pH for efficient inverted perovskite solar cells with reduced potential loss and enhanced stability10.1021/acsami.6b11757 ↗
32. Solution processed perovskite solar cells using highly conductive PEDOT:PSS interfacial layer10.1016/j.solmat.2016.05.011 ↗
33. Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor10.1039/C4NR03181D ↗
34. Highly efficient and stable planar perovskite solar cells with reduced graphene oxide nanosheets as electrode interlayer10.1016/j.nanoen.2014.12.022 ↗
35. Copper(II) chloride doped graphene oxides as efficient hole transport layer for high-performance polymer solar cells10.1016/j.orgel.2017.02.020 ↗
36. Inverted planar solar cells based on perovskite/graphene oxide hybrid composites10.1039/C7TA04575A ↗
37. Fluorine functionalized graphene nano platelets for highly stable inverted perovskite solar cells10.1021/acs.nanolett.7b03225 ↗
38. Anomalous charge‐extraction behavior for graphene‐oxide (GO) and reduced graphene‐oxide (rGO) films as efficient p‐contact layers for high‐performance perovskite solar cells10.1002/aenm.201701640 ↗
39. Hole and electron extraction layers based on graphene oxide derivatives for high-performance bulk heterojunction solar cells10.1002/adma.201104945 ↗
40. Anomalous charge-extraction behavior for graphene-oxide (GO) and reduced graphene-oxide (rGO) films as efficient p-contact layers for high-performance perovskite solar cells
41. Graphene oxide/PEDOT:PSS composite hole transport layer for efficient and stable planar heterojunction perovskite solar cells10.1039/C5NR05271H ↗
42. High-performance perovskite solar cells engineered by an ammonia modified graphene oxide interfacial layer10.1021/acsami.6b02064 ↗
43. Processable aqueous dispersions of graphene nanosheets10.1038/nnano.2007.451 ↗
44. Reproducible one-step fabrication of compact MAPbl(3-x)Cl(x) thin films derived from mixed-lead-halide precursors10.1021/cm5037869 ↗
45. A simple perylene derivative as a solution-processable cathode interlayer for perovskite solar cells with enhanced efficiency and stability10.1021/acsami.8b02256 ↗
46. Control of work function of graphene by plasma assisted nitrogen doping10.1063/1.4870424 ↗
47. Identification of the basic site on the aluminovanadate oxynitride catalysts10.1006/jcat.1999.2773 ↗
48. Self-organized gradient hole injection to improve the performance of polymer electroluminescent devices10.1002/adfm.200600278 ↗
49. Online evolved gas analyses (EGA by TG-FTIR and TG/DTA-MS) and solid state (FTIR, XRD) studies on thermal decomposition and partial reduction of ammonium paratungstate tetrahydrate10.1016/j.ssi.2004.02.066 ↗
50. High performance planar heterojunction perovskite solar cells with fullerene derivatives as the electron transport layer10.1021/am506869k ↗
51. Facilitating electron transportation in perovskite solar cells via water-soluble fullerenol interlayers10.1021/acsami.6b04895 ↗
52. Controllable perovskite crystallization by water additive for high-performance solar cells10.1002/adfm.201503559 ↗
53. Enhancing the planar heterojunction perovskite solar cell performance through tuning the precursor ratio10.1039/C6TA00679E ↗
54. Stable high-performance hybrid perovskite solar cells with ultrathin polythiophene as hole-transporting layer10.1007/s12274-015-0755-5 ↗
55. Well-defined thiolated nanographene as hole-transporting material for efficient and stable perovskite solar cells10.1021/jacs.5b06493 ↗
56. Ionic additive engineering toward high-efficiency perovskite solar cells with reduced grain boundaries and trap density10.1002/adfm.201801985 ↗
57. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
58. Hysteresis-suppressed high-efficiency flexible perovskite solar cells using solid-state ionic-liquids for effective electron transport10.1002/adma.201600446 ↗
59. Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells10.1039/C6EE02139E ↗
60. Boosting the performance of planar heterojunction perovskite solar cell by controlling the precursor purity of perovskite materials10.1039/C5TA08398B ↗
61. Highly efficient electron transport obtained by doping PCBM with graphdiyne in planar-heterojunction perovskite solar cells10.1021/acs.nanolett.5b00787 ↗
62. Differential resistance analysis of charge carrier losses in organic bulk heterojunction solar cells: observing the transition from bimolecular to trap-assisted recombination and quantifying the order of recombination10.1002/aenm.201100196 ↗
63. Quantifying bimolecular recombination losses in organic bulk heterojunction solar cells10.1002/adma.201004311 ↗
64. Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells10.1063/1.2130396 ↗
65. A cytop insulating tunneling layer for efficient perovskite solar cells10.1002/smtd.201700244 ↗
66. Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells10.1038/ncomms15330 ↗