Effect of annealing temperature on the performance of printable carbon electrodes for perovskite solar cells
Source abstract
Abstract
Perovskite solar cells (PSCs) with mesoporous TiO 2 electron transport layers have reached >22% efficiency at laboratory scale (<1 cm 2 ), however, these layers are fabricated using spin-coating, which is not conducive to large-scale or high throughput fabrication. Alternatively, screen printing, slot die coating and spray pyrolysis techniques are very suitable for commercial scale production of PSCs. In this work, low-cost carbon films intended for PSCP top conductor layer have been prepared by screen printing method and their electrical, morphological and structural properties have been investigated for annealing temperatures ranging from 100 °C to 400 °C. The properties of the carbon films have been examined using scanning electron microscopy, atomic force microscopy, sheet resistance measurement technique, thermogravimetric analysis, differential scanning calorimetry, fourier transform infrared spectroscopy and raman spectroscopy. The carbon films annealed at 250°C-300 °C exhibited good electrical and morphological properties, however, annealing temperature over 300 °C deforms and peels off the carbon films. Nevertheless, devices fabricated from printed substrates with a carbon top contact showed that annealing of the hole transport material-free mesoscopic architecture to over 300 °C is necessary prior to the infiltration of the perovskite precursor solution. Although a low annealing temperature is required for better adherence of the conductive carbon films, however, temperatures higher than 300 °C are needed to fabricate mesoscopic perovskite solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
2. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
3. Spectroscopic and electrical properties of polyaniline/CeO2 composites and their application as humidity sensor10.1002/app.24636 ↗
4. https://www.nrel.gov/pv/assets/images/efficiency-chart.png, DOI.
5. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
6. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
7. Seok · 2018
8. Promise of commercialization: carbon materials for low-cost perovskite solar cells10.1088/1674-1056/27/1/018805 ↗
9. Efficient carbon-based CsPbBr3 inorganic perovskite solar cells by using Cu-phthalocyanine as hole transport material10.1007/s40820-018-0187-3 ↗
10. Fully printable perovskite solar cells with highly-conductive, low-temperature, perovskite-compatible carbon electrode10.1016/j.carbon.2017.09.008 ↗
11. Activated graphene nanoplatelets as a counter electrode for dye-sensitized solar cells10.1063/1.4945375 ↗
12. Application of carbon nanotubes in perovskite solar cells: a review10.1063/1.5010632 ↗
13. Promise of commercialization: carbon materials for low-cost perovskite solar cells
14. Efficient and air-stable planar perovskite solar cells formed on graphene-oxide-modified PEDOT: PSS hole transport layer10.1007/s40820-017-0140-x ↗
15. Improved manufacturing performance of screen printed carbon electrodes through material formulation10.3390/bios6030030 ↗
16. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
17. Recent developments in the field of screen-printed electrodes and their related applications10.1016/j.talanta.2007.03.050 ↗
18. Graphene oxide reduced and modified by environmentally friendly glycylglycine and its excellent catalytic performance10.1088/0957-4484/25/13/135707 ↗
19. Bokobza · 2015 · vol. 1 · 77
20. Purity assessment of multiwalled carbon nanotubes by Raman spectroscopy10.1063/1.2712152 ↗
21. Few layer reduced graphene oxide: evaluation of the best experimental conditions for easy production10.1590/1980-5373-mr-2015-0528 ↗
22. Characterization of carbon nanotubes by TEM and infrared spectroscopy10.1021/jp0372183 ↗
23. Raman and FTIR spectroscopy as valuable tools for the characterization of polymer and carbon nanotube based composites10.1039/b821136a ↗
24. FTIR spectroscopy of multiwalled carbon nanotubes: a simple approach to study the nitrogen doping10.1166/jnn.2007.723 ↗
25. High performance carbon-based printed perovskite solar cells with humidity assisted thermal treatment10.1039/C7TA04132B ↗