journal article·2011-04

Time dependence and freezing-in of the electrode oxygen plasma-induced work function enhancement in polymer semiconductor heterostructures

Thomas M. Brown, G. Mattia Lazzerini, Lisa J. Parrott, V. Bodrozic, Lukas Bürgi, Franco Cacialli

Organic Electronics· Volume 12· Issue 4
Publisher page

Abstract

Indium tin oxide (ITO), Au and Pt are materials of interest as high work function contacts for organic semiconductor devices. In this paper the relative energy level line-up of these materials is investigated both as bare surfaces or part of a polymer/conductor interface. Kelvin probe (KP) measurements show that the estimated work function for Au and Pt surfaces, evaporated under normal high vacuum (HV) fabrication conditions and measured in air, can be significantly lower (by ∼0.2 to 0.9 eV) than those of clean surfaces evaporated and measured in the more demanding and clean ultra high vacuum (UHV), that are often used as reference values. The work function of all surfaces increases significantly (from ∼0.4 to >1 eV) after an oxygen plasma, but then decreases upon air exposure, with different rates for different materials. The effect of the plasma wears off most rapidly for Au whilst it is more resilient for ITO. Most interestingly, via KP and electroabsorption measurements of the built-in potential on polymer/conductor and conductor/polymer/conductor structures, we demonstrate that a plasma-induced enhancement of the work function is “frozen in” by the application of a polymer semiconductor layer over the plasma-treated surfaces and can be made to last for years by proper device encapsulation. These results have strong implications on the understanding, fabrication, design and stability of organic semiconductor devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Energy-level alignment at organic/metal and organic/organic interfaces10.1002/adma.200802893 ↗
2. Conjugated organic molecules on metal versus polymer electrodes: demonstration of a key energy level alignment mechanism10.1063/1.1532102 ↗
3. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
4. Koch · Applied Surface Science · 2000 · 166 · 35410.1016/S0169-4332(00)00449-9 ↗
5. Stability and characterization of large area polymer light-emitting diodes over extended periods10.1016/S0169-4332(00)00449-9 ↗
6. Electronic structure and electrical properties of interfaces between metals and pi-conjugated molecular films10.1002/polb.10642 ↗
7. The work function of the elements and its periodicity10.1063/1.323539 ↗
8. Controlling Schottky energy barriers in organic electronic devices using self-assembled monolayers10.1103/PhysRevB.54.R14321 ↗
9. Organic electroluminescent devices: enhanced carrier injection using SAM derivatized ITO electrodes10.1039/a903708j ↗
10. Tuning of metal work functions with self-assembled monolayers10.1002/adma.200401216 ↗
11. Self-assembly surface modified indium-tin oxide anodes for single-layer light-emitting diodes10.1088/0022-3727/36/5/304 ↗
12. Self-assembled monolayers of protonated poly(amidoamine) dendrimers on indium-tin oxide10.1063/1.2829387 ↗
13. Stability of optical and electroluminescence properties of a semiconducting polymer over a decade10.1016/j.orgel.2010.06.012 ↗
14. Flexible light-emitting diodes made from soluble conducting polymers10.1038/357477a0 ↗
15. Polymeric anodes for improved polymer light-emitting diode performance10.1063/1.118953 ↗
16. Built-in field electroabsorption spectroscopy of polymer light-emitting diodes incorporating a doped poly(3,4-ethylene dioxythiophene) hole injection layer10.1063/1.124789 ↗
17. Indium-tin oxide treatments for single- and double-layer polymeric light-emitting diodes: the relation between the anode physical chemical and morphological properties and the device performance10.1063/1.368981 ↗
18. X-ray photoelectron spectroscopy of surface-treated indium-tin oxide thin films10.1016/S0009-2614(99)01233-6 ↗
19. Enhancement of hole injection using O2 plasma-treated Ag anode for top-emitting organic light-emitting diodes
20. Kelvin probe investigations of metal work functions and correlation to device performance of organic light-emitting devices10.1016/S0379-6779(99)00450-6 ↗
21. Work function modification of indium-tin-oxide used in organic light emitting devices10.1116/1.581889 ↗
22. Vibrational analysis of oxygen-plasma treated indium tin oxide10.1016/S0009-2614(03)00177-5 ↗
23. Surface characterization of O2-plasma-treated indium-tin-oxide (ITO) anodes for organic light-emitting-device applications
24. Surface modification of indium tin oxide by plasma treatment: an effective method to improve the efficiency, brightness and reliability of organic light emitting devices10.1063/1.118575 ↗
25. Improvement of organic electroluminescent device performance by in situ plasma treatment of indium-tin-oxide surface10.1016/S0022-2313(99)00581-5 ↗
26. Close look at charge carrier injection in polymer field-effect transistors10.1063/1.1613369 ↗
27. Work function modification of indium-tin oxide by surface plasma treatments using different gases10.1143/JJAP.48.021601 ↗
28. Characterization of treated indium-tin-oxide surfaces used in electroluminescent devices10.1063/1.370948 ↗
29. Xue · Journal of Applied Physics · 2004 · 95 · 15
30. Characterization of properties of polymeric light-emitting-diodes over extended periods10.1016/0379-6779(94)90031-0 ↗
31. Interfacial dipole dynamics of light-emitting diodes incorporating a polyamidoamine dendrimer monolayer10.1063/1.3459964 ↗
32. Electronic line-up in light emitting diodes with alkali-halide/metal cathodes10.1063/1.1562739 ↗
33. The built-in potential in blue polyfluorene-based light-emitting diodes10.1002/adma.200702346 ↗
34. The influence of subgap features in the electromodulation and built-in voltage measurements of polyfluorene blue light-emitting diodes with anodic charge injection layers10.1063/1.2717612 ↗
35. Piezoelectric driven Kelvin probe for contact potential difference studies10.1063/1.1134750 ↗
36. Practical aspects of Kelvin probe force microscopy10.1063/1.1149664 ↗
37. Feasibility study of photocathode electron projection lithography10.1116/1.588101 ↗
38. Work function measurement in gas ambient10.1016/0039-6028(94)91229-7 ↗
39. Standard reference surfaces for work function measurements in air10.1016/S0039-6028(01)01036-6 ↗
40. Kelvin probe ultraviolet photoelectron spectroscopy measurements of indium tin oxide workfunction: a comparison10.1016/S0379-6779(99)00354-9 ↗
41. T.M. Brown, Ph.D. Thesis, Cambridge University, 2001.
42. High performance organic polymer light-emitting heterostructure devices10.1063/1.123862 ↗
43. Electrochemical determination of the ionization potential electron affinity of poly(9,9-dioctylfluorene)10.1063/1.122479 ↗
44. Near-field photoconductivity imaging of a conjugated polymer blend10.1002/adfm.200400528 ↗
45. Direct measurement of conjugated polymer electronic excitation energies using metal/polymer/metal structures10.1103/PhysRevLett.76.1900 ↗
46. Electronic structure of hybrid interfaces of poly(9,9-dioctylfluorene)10.1016/S0009-2614(00)00338-9 ↗
47. Internal fields and electrode interfaces in organic semiconductor devices: noninvasive investigations via electroabsorption
48. Reliable and reproducible determination of work function and ionization potentials of layers and surfaces relevant to organic light emitting diodes10.1016/j.orgel.2003.12.002 ↗
49. Nanoscale electrical conductivity and surface spectroscopic studies of indium-tin oxide10.1021/jp0040749 ↗
50. Adsorption of carbon monoxide on Au10.1016/S0039-6028(03)00595-8 ↗
51. Conjugated polymer surfaces and interfaces: a mini review and some new results10.1016/S0379-6779(96)03692-2 ↗
52. Salaneck · 1996
53. Interaction of oxygen with Pt(210): formation of new oxygen states at higher exposures10.1016/S0039-6028(99)01173-5 ↗
54. Energetics at Au top and bottom contacts on conjugated polymers10.1063/1.2201627 ↗
55. Electronic structure of hybrid interfaces for polymer-based electronics10.1088/0953-8984/19/18/183202 ↗
56. Elimination of hole injection barriers by conducting polymer anodes in polyfluorene light-emitting diodes10.1103/PhysRevB.74.125320 ↗
57. Modification of indium tin oxide for improved hole injection in organic light emitting diodes10.1002/1521-4095(200108)13:16<1234::AID-ADMA1234>3.0.CO;2-R ↗
58. Relation between the built-in voltage in organic light-emitting diodes and the zero-field voltage as measured by electroabsorption10.1103/PhysRevB.81.125203 ↗
59. Mechanism for the increase of indium-tin-oxide work function by O2 inductively coupled plasma treatment10.1063/1.1633351 ↗
60. Degradation in blue-emitting conjugated polymer diodes due to loss of ohmic hole injection10.1063/1.1645982 ↗
61. Transient and steady-state space-charge-limited currents in polyfluorene copolymer diode structures with ohmic hole injecting contacts10.1063/1.126182 ↗
62. Reliability and degradation of organic light-emitting devices10.1063/1.112532 ↗
63. Introduction to the issue on organic light-emitting diodes10.1109/JSTQE.2004.824070 ↗
64. Stability and characterization of large area polymer light-emitting diodes over extended periods10.1016/S0925-3467(99)00049-X ↗
65. Operating stability of light-emitting polymer diodes based on poly(p-phenylene vinylene)10.1063/1.119483 ↗
66. Energy level alignment of electrically doped hole transport layers with transparent and conductive indium tin oxide and polymer anodes10.1063/1.2786573 ↗
67. Stability of polythiophene-based transistors and circuits10.1063/1.1592869 ↗
68. Polymer photovoltaic detectors: progress and recent developments10.1016/j.tsf.2003.11.062 ↗
69. G. Yu, G. Srdanov, H.L. Wang, Y. Cao, A.J. Heeger, High performance polymer photovoltaic cells and photodetectors, in: Z.H. Kafafi (Ed.), Organic Photovoltaics, 2000, pp. 48–56.10.1117/12.416931 ↗
70. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗
71. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
72. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
73. Longterm stability of efficient inverted P3HT:PCBM solar cells10.1016/j.solmat.2008.12.022 ↗