journal article·2017-07

Efficient planar perovskite solar cells using solution-processed amorphous WO x /fullerene C 60 as electron extraction layers

Vincent Obiozo Eze, Yoshiyuki Seike, Tatsuo Mori

Publisher page

Abstract

Abstract In perovskite solar cells (PSCs), an electron extraction layer (EEL) plays a crucial role in extracting electrons from the perovskite layer and blocking the holes in it from recombining with the electrons in the fluorine-doped tin oxide (FTO). Amorphous tungsten oxide (WOx) has been successfully employed as EEL in PSCs. However, the WOx device suffers from inherent charge recombination, resulting in low open circuit voltage (Voc) and fill factor (FF). Here, we report that WOx/fullerene C60 can work coactively to further enhance the performance of PSCs. PSC with WOx/C60 EELs showed a power conversion efficiency of 16.07% with an open circuit voltage of 0.93 V, a short-circuit current density of 22.15 mA/cm2, and a fill factor of 0.78, which were higher than those of PSCs with pristine WOx EEL. Our results suggest that using WOx/C60 as EELs offer a simple and effective approach for fabricating high-performance and low-temperature PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Excitons versus free charges in organo-lead tri-halide perovskites10.1038/ncomms4586 ↗
2. Electron-hole diffusion lengths> 175 μm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
3. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
4. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
5. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
6. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
7. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
9. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
10. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
11. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
12. Enhancing stability and efficiency of perovskite solar cells with crosslinkable silane-functionalized and doped fullerene10.1038/ncomms12806 ↗
13. Air-assisted flow and two-step spin-coating for highly efficient CH3NH3PbI3 perovskite solar cells10.7567/JJAP.55.02BF08 ↗
14. Enhanced photovoltaic performance of planar perovskite solar cells fabricated in ambient air by solvent annealing treatment method10.7567/JJAP.55.122301 ↗
15. Triple cathode buffer layers composed of PCBM, C60, and LiF for high-performance planar perovskite solar cells10.1021/acsami.5b00468 ↗
16. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
17. Decomposition of organometal halide perovskite films on zinc oxide nanoparticles10.1021/acsami.5b04695 ↗
18. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
19. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
20. Perovskite solar cells based on low-temperature processed indium oxide electron selective layers10.1021/acsami.5b12849 ↗
21. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
22. Low-temperature TiO x compact layer for planar heterojunction perovskite solar cells10.1021/acsami.5b12123 ↗
23. Sub-150 C processed meso-superstructured perovskite solar cells with enhanced efficiency10.1039/C3EE43707H ↗
24. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
25. Effect of oxygen-deficiency on electrical transport properties of tungsten trioxide crystals10.1016/0022-4596(70)90040-X ↗
26. The structure and electrical conductivity of vacuum-annealed WO 3 thin films10.1016/j.tsf.2004.04.018 ↗
27. One-dimensional WO 3 nanorods as photoelectrodes for dye-sensitized solar cells10.1016/j.jallcom.2012.08.124 ↗
28. Dye-sensitized solar cells based on WO310.1021/la103692y ↗
29. Opportunities and challenges in science and technology of WO 3 for electrochromic and related applications10.1016/j.solmat.2007.01.026 ↗
30. Electrochromic properties of tungsten oxide nanowires fabricated by electrospinning method10.1016/j.solmat.2009.02.008 ↗
31. Highly sensitive WO3 hollow-sphere gas sensors10.1021/ic049522w ↗
32. Semiconductor gas sensors based on nanostructured tungsten oxide10.1016/S0040-6090(01)00991-9 ↗
33. Rational band gap engineering of WO3 photocatalyst for visible light water splitting10.1002/cctc.201100446 ↗
34. Monoclinic WO 3 nanorods–rutile TiO 2 nanoparticles core–shell interface for efficient DSSCs10.1039/c3dt50728a ↗
35. Solution-processed tungsten oxide as an effective anode buffer layer for high-performance polymer solar cells10.1021/jp304878u ↗
36. Highly efficient perovskite solar cells based on a nanostructured WO 3–TiO 2 core–shell electron transporting material10.1039/C4TA04883K ↗
37. Low-temperature and solution-processed amorphous WO X as electron-selective layer for perovskite solar cells10.1021/acs.jpclett.5b00010 ↗
38. WO 3 nanoparticles or nanorods incorporating Cs 2 CO 3/PCBM buffer bilayer as carriers transporting materials for perovskite solar cells10.1186/s11671-016-1670-8 ↗
39. Amorphous inorganic electron-selective layers for efficient perovskite solar cells: feasible strategy towards room-temperature fabrication10.1002/adma.201505241 ↗
40. W (Nb) O x-based efficient flexible perovskite solar cells: from material optimization to working principle10.1016/j.nanoen.2016.11.054 ↗
41. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
42. Photovoltaic properties of organic thin-film solar cell using various exciton-diffusion blocking materials10.2494/photopolymer.20.61 ↗
43. Photovoltaic properties of polythiophen: fullerene derivative solar cell using annealing due to anode joule heating10.2494/photopolymer.28.393 ↗
44. Efficient fully-vacuum-processed perovskite solar cells using copper phthalocyanine as hole selective layers10.1039/C5TA07829F ↗
45. Efficient planar perovskite solar cells using room-temperature vacuum-processed C 60 electron selective layers10.1039/C5TA04313A ↗
46. Cooperative tin oxide fullerene electron selective layers for high-performance planar perovskite solar cells10.1039/C6TA05095F ↗
47. Roles of fullerene-based interlayers in enhancing the performance of organometal perovskite thin-film solar cells10.1002/aenm.201402321 ↗
48. Fabrication of metal-oxide-free CH 3 NH 3 PbI 3 perovskite solar cells processed at low temperature10.1039/C5TA00011D ↗
49. C60 as an efficient n-type compact layer in perovskite solar cells10.1021/acs.jpclett.5b00902 ↗
50. High-efficiency solution-processed planar perovskite solar cells with a polymer hole transport layer10.1002/aenm.201401855 ↗
51. Efficient planar perovskite solar cells prepared via a low-pressure vapor-assisted solution process with fullerene/TiO 2 as an electron collection bilayer10.1039/C6RA14372E ↗
52. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
53. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
54. Perovskite-fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
55. Synthesis and structure-activity relationship of a WO3 catalyst for the total oxidation of BTX
56. Characterization of electrodeposited WO 3 films and its application to electrochemical wastewater treatment10.1016/S0013-4686(02)00435-8 ↗
57. Multifunctional fullerene derivative for interface engineering in perovskite solar cells10.1021/jacs.5b10614 ↗
58. Preparation of electrochromic tungsten oxide thin film by sol-gel process10.2109/jcersj.107.199 ↗
59. Efficient perovskite solar cells using trichlorosilanes as perovskite/PCBM interface modifiers10.1016/j.orgel.2016.09.018 ↗
60. Effect of polyelectrolyte interlayer on efficiency and stability of pin perovskite Solar cells10.1016/j.solener.2016.09.048 ↗
61. Impact of annealing treatment on structural and dc electrical properties of spin coated tungsten trioxide thin films for Si/WO 3/Ag junction diode10.1016/j.mssp.2016.08.007 ↗
62. Interface energetics at WOX/organic interfaces: the role of oxygen vacancies
63. Printable WO 3 electron transporting layer for perovskite solar cells: influence on device performance and stability10.1016/j.solmat.2016.10.002 ↗
64. Preparation of ultra-thin and high-quality WO 3 compact layers and comparision of WO 3 and TiO 2 compact layer thickness in planar perovskite solar cells10.1016/j.jssc.2016.03.033 ↗
65. Low-temperature and hysteresis-free electron-transporting layers for efficient, regular, and planar structure perovskite solar cells10.1002/aenm.201501056 ↗
66. Annealing-free efficient vacuum-deposited planar perovskite solar cells with evaporated fullerenes as electron-selective layers10.1016/j.nanoen.2015.11.008 ↗
67. Hysteresis-free low-temperature-processed planar perovskite solar cells with 19.1% efficiency10.1039/C6EE01037G ↗
68. Efficient planar-heterojunction perovskite solar cells achieved via interfacial modification of a sol–gel ZnO electron collection layer10.1039/C4TA03954H ↗
69. A universal interface layer based on an amine-functionalized fullerene derivative with dual functionality for efficient solution processed organic and perovskite solar cells10.1002/aenm.201401692 ↗
70. Facilitating electron transportation in perovskite solar cells via water-soluble fullerenol interlayers10.1021/acsami.6b04895 ↗
71. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
72. Improved light harvesting and improved efficiency by insertion of an optical spacer (ZnO) in solution-processed small-molecule solar cells10.1021/nl401758g ↗
73. Enhanced electron extraction capability of polymer solar cells via employing electrostatically self-assembled molecule on cathode interfacial layer10.1021/acsami.5b12394 ↗
74. Hysteresis-less inverted CH 3 NH 3 PbI 3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
75. Ionic transport in hybrid lead iodide perovskite solar cells10.1038/ncomms8497 ↗
76. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
77. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
78. Giant switchable photovoltaic effect in organometal trihalide perovskite devices10.1038/nmat4150 ↗
79. Charge selective contacts, mobile ions and anomalous hysteresis in organic–inorganic perovskite solar cells10.1039/C4MH00238E ↗
80. Heterojunction modification for highly efficient organic–inorganic perovskite solar cells10.1021/nn505723h ↗
81. Successive surface engineering of TiO 2 compact layers via dual modification of fullerene derivatives affording hysteresis-suppressed high-performance perovskite solar cells10.1039/C6TA07876A ↗