Modified mass printing technique for the realization of source/drain electrodes with high resolution
Source abstract
Abstract
We report on the development of a technique for the realization of source/drain electrodes of organic field-effect transistors (OFETs) with small channel length down to 10 μm. The process uses a combination of two different mass printing technologies (flexographic and gravure printing), which are both highly productive. In a first step a negative image of the electrode pattern was printed from an amorphous perfluorinated poly(alkenyl vinyl ether) (CYTOP™ CTL-809M), a material forming a surface of very low surface energy, followed by a full-tone-print of a conductive material, e.g. poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS). Despite the full-tone-print the conductive ink was transferred in a patterned fashion due to the heterogeneous surface properties and formed very homogenous and smooth source/drain structures. On the basis of these source/drain electrodes OFETs, inverters and ring oscillators were realized by means of mass printing methods only.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. 2001
2. Ring oscillator fabricated completely by means of mass-printing technologies10.1016/j.orgel.2007.02.009 ↗
3. Polymer-based organic field-effect transistor using offset printed source/drain structures10.1063/1.2056579 ↗
4. Utilizing roll-to-roll techniques for manufacturing source/drain electrodes for all-polymer transistors10.1016/j.synthmet.2005.07.140 ↗
5. Uniformity of fully gravure printed organic field-effect transistors10.1016/j.mseb.2010.02.035 ↗
6. Gravure printed organic rectifying diodes operating at high frequencies10.1016/j.orgel.2009.04.008 ↗
7. Process optimization of gravure printed light-emitting polymer layers by a neural network approach10.1016/j.orgel.2009.08.015 ↗
8. Gravure printed organic light emitting diodes for lighting applications10.1016/j.tsf.2009.03.209 ↗
9. M. Tuomikoski, P. Kopola, H. Jin, M. Ylikunnari, J. Hiitola-Keinänen, M. Välimäki, M. Aikio, J. Hast, Roll-to-Roll Manufacturing of Organic Photovoltaic Modules, IEEE, European Microelectronics and Packaging Conference (EMPC). Rimini, Italy, 15–18 June 2009.
10. Novel in-line method for patterned deposition of conductive structures10.1016/j.orgel.2009.02.004 ↗
11. High-resolution inkjet printing of all-polymer transistor circuits10.1126/science.290.5499.2123 ↗
12. Lithography-free, self-aligned inkjet printing with sub-hundred-nanometer resolution10.1002/adma.200401285 ↗
13. Polymer field effect transistors fabricated by dewetting10.1016/j.synthmet.2004.08.007 ↗
14. Organic polymeric thin-film transistors fabricated by selective dewetting10.1063/1.1524301 ↗
15. Patterning organic semiconductors using “dry” poly(dimethylsiloxane) elastomeric stamps for thin film transistors10.1021/ja058226v ↗
16. Field-effect transistors made from solution-processed organic semiconductors10.1016/S0379-6779(97)80881-8 ↗
17. Solvent effect of inkjet printed source/drain electrodes on electrical properties of polymer thin-film transistors10.1063/1.2177642 ↗
18. Optimized sub-micron organic thin-film transistors: the influence of contacts and oxide thickness10.1016/j.synthmet.2004.08.012 ↗
19. Scaling limits of organic thin film transistors10.1016/j.orgel.2010.01.002 ↗
20. Semiconductors for organic transistors