journal article·2016-02Open access

Inkjet printed thin and uniform dielectrics for capacitors and organic thin film transistors enabled by the coffee ring effect

Neil Graddage, Ta-Ya Chu, Heping Ding, Christophe Py, Afshin Dadvand, Ye Tao

Abstract

Abstract The deposition of a thin and uniform dielectric layer is required for high performance printed capacitors and thin film transistors (TFTs), however this is difficult to achieve with printing methods. We have demonstrated inkjet-printed dielectrics with a uniform thickness from 70 nm to 200 nm by taking advantage of the coffee ring effect. A high capacitance per unit area of 230 pF/mm2 is achieved from capacitors with linear morphologies fully printed onto flexible substrates. We also demonstrate organic TFTs with an average mobility of 0.86 cm2/Vs and a source drain current of 57 μA obtained with a supply voltage of 15 V. This performance was shown to be consistent, with a standard deviation of 15% obtained from hundreds of printed organic TFTs on PET substrates. This consistency was further validated by the production of functional NAND, NOR, AND and OR logic gates. Our results demonstrate that the coffee ring effect, which is usually viewed as undesirable, can enable higher performance in printed electronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Thin-Film Transistor Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Fabrication and processing of polymer solar cells: A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. 12-Printing techniques for the fabrication of OLEDs
3. Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices10.1109/JPROC.2005.850305 ↗
4. Solution processed organic field-effect transistors and their application in printed logic circuits10.1039/c0jm00331j ↗
5. Electrical characterization of ink-jet printed organic capacitors on flexible substrate10.1117/12.963740 ↗
6. All-inkjet-printed electrical components and circuit fabrication on a plastic substrate10.1016/j.mee.2012.03.032 ↗
7. All-polymer capacitor fabricated with inkjet printing technique10.1016/S0038-1101(03)00082-0 ↗
8. Ultra-thin polymer gate dielectrics for top-gate polymer field-effect transistors10.1016/j.orgel.2008.10.021 ↗
9. Tables of Physical & Chemical Constants (16th edition 1995)
10. Influence of the dielectric constant of a polyvinyl phenol insulator on the field-effect mobility of a pentacene-based thin-film transistor10.1063/1.2093940 ↗
11. All-inkjet-printed Metal-Insulator-Metal (MIM) capacitor10.1016/j.cap.2011.04.035 ↗
12. Improvement on Relative Permittivity of Inkjet-Printed BaTiO3-Resin Hybrid Film by Manipulating Ceramic Powder Size-Distribution10.1111/j.1744-7402.2011.02651.x ↗
13. Dielectric Properties of a Printed Sol-Gel Matrix Composite10.1002/adem.201000109 ↗
14. Exploring Strategies for High Dielectric Constant and Low Loss Polymer Dielectrics10.1021/jz501831q ↗
15. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
16. Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect10.1021/la7026847 ↗
17. Geometrical characterization of inkjet-printed conductive lines of nanosilver suspensions on a polymer substrate10.1016/j.tsf.2009.10.126 ↗
18. Profile Control of Inkjet Printed Silver Electrodes and Their Application to Organic Transistors10.1021/am400632s ↗
19. Formation and Stability of Lines Produced by Inkjet Printing10.1021/la101296e ↗
20. Topography of Thin Film Formed by Drying Silver Nanoparticle Dispersion Droplets10.1143/JJAP.46.6807 ↗
21. Modeling of the Drying Process of Liquid Droplet to Form Thin Film10.1143/JJAP.44.4229 ↗
22. Self-Organization of Inkjet-Printed Organic Semiconductor Films Prepared in Inkjet-Etched Microwells10.1002/adfm.201300936 ↗
23. Exploitation of the coffee-ring effect to realize mechanically enhanced inkjet-printed microelectromechanical relays with U-bar-shaped cantilevers10.1063/1.4904953 ↗
24. Inkjet Printing High-Resolution, Large-Area Graphene Patterns by Coffee-Ring Lithography10.1002/adma.201103620 ↗
25. A High Mobility P-Type DPP-Thieno[3,2-b]thiophene Copolymer for Organic Thin-Film Transistors10.1002/adma.201002313 ↗