ITO-free large-area flexible organic solar cells with an embedded metal grid
Source abstract
Abstract
Abstract We report on ITO-free large-area flexible organic solar cells with embedded thick metal grids. Embedded thick metal grids on flexible substrates allow uniform spin coating of thin layers of PEDOT:PSS (PH1000) semitransparent electrodes and organic semiconductor layers. A transparent SU8 photo-patternable polymer is used as a flexible substrate. Electroplated copper metallic grids, up to 15 μm thick, defined by photolithography, produce a shadow area of 5.5% of the active area. Inverted solar cells with an active area of 9.3 ± 0.2 cm2, exhibited a fill factor of 0.53 ± 0.06, and an open-circuit voltage of 808 ± 5 mV and a short-circuit current density of 5.5 ± 0.5 mA/cm2, yielding a power conversion efficiency of 2.4 ± 0.4% under 100 mW/cm2 air mass 1.5G illumination. The fill-factor and open circuit voltage values of large-area solar cells are comparable to values reported on small-area solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Organic photovoltaics10.1039/b812502n ↗
2. Recent progress in organic photovoltaics: device architecture and optical design10.1039/c4ee00260a ↗
3. Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules10.1039/C4EE01223B ↗
4. 10.2% Power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
7. Performance of flexible polymeric light-emitting diodes under bending conditions10.1063/1.1574400 ↗
8. Investigation on polymer anode design for flexible polymer solar cells10.1063/1.2945796 ↗
9. Flexible organic photovoltaics using conducting polymer electrodes10.1063/1.1867568 ↗
10. An ultrathin, smooth, and low-loss Al-doped Ag film and its application as a transparent electrode in organic photovoltaics10.1002/adma.201306091 ↗
11. Interfacial engineering of ultrathin metal film transparent electrode for flexible organic photovoltaic cells10.1002/adma.201306212 ↗
12. Spraycoating of silver nanoparticle electrodes for inverted polymer solar cells10.1016/j.orgel.2009.02.019 ↗
13. Towards efficient tin-doped indium oxide (ITO)-free inverted organic solar cells using metal cathodes10.1063/1.3059552 ↗
14. Organic photovoltaics using thin gold film as an alternative anode to indium tin oxide10.1016/j.tsf.2011.04.071 ↗
15. All-solution-processed indium-free transparent composite electrodes based on Ag nanowire and metal oxide for thin-film solar cells10.1002/adfm.201303518 ↗
16. Silver nanowire/polyaniline composite transparent electrode with improved surface properties10.1016/j.materresbull.2014.05.031 ↗
17. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
18. Organic solar cells using nanoimprinted transparent metal electrodes10.1002/adma.200800750 ↗
19. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
20. Transparent Cu nanowire mesh electrode on flexible substrates fabricated by transfer printing and its application in organic solar cells10.1016/j.solmat.2010.02.039 ↗
21. Electrode grids for ITO free organic photovoltaic devices10.1002/adma.200602561 ↗
22. ITO-free large-area organic solar cells10.1364/OE.18.00A458 ↗
23. Area-scaling of organic solar cells10.1063/1.3211850 ↗
24. Factors influencing the efficiency of current collection in large area, monolithic organic solar cells10.1002/aenm.201200254 ↗
25. Retention of power conversion efficiency – from small area to large area polymer solar cells10.1002/adma.201204048 ↗
26. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
27. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
28. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
29. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
30. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
31. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
32. ITO-free large-area organic light-emitting diodes with an integrated metal grid10.1364/OE.19.00A793 ↗
33. S. Choi, W.J. Potscavage, Jr., B. Kippelen, Area-scaling of organic solar cells and integrated modules, in: J. Xue (Ed.) Organic Materials and Devices for Sustainable Energy Systems, Mater. Res. Soc. Symp. Proc., Boston, MA, USA, 2009, pp. S06.10.1557/PROC-1212-S06-04-C07-04 ↗
34. Transparent conductive film with printable embedded patterns for organic solar cells10.1016/j.solmat.2012.10.013 ↗
35. Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices10.1088/0957-4484/24/48/484014 ↗
36. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗