journal article·2016-11

A low-cost and low-temperature processable zinc oxide-polyethylenimine (ZnO:PEI) nano-composite as cathode buffer layer for organic and perovskite solar cells

Xiaorui Jia, Na Wu, Junfeng Wei, Lianping Zhang, Qun Luo, Zhongmin Bao, Yan-Qing Li, Yongzhen Yang, Xuguang Liu, Chang-Qi Ma

Publisher page

Abstract

Abstract Nanocomposite buffer layer based on metal oxide and polymer is merging as a novel buffer layer for organic solar cells, which combines the high charge carrier mobility of metal oxide and good film formation properties of polymer. In this work, a nanocomposite of zinc oxide and a commercialized available polyethylenimine (PEI) was developed and used as the cathode buffer layer (CBL) for the inverted organic solar cells and p-i-n heterojunction perovskite solar cells. The cooperation of PEI in nano ZnO offers a good film forming ability of the composite material, which is an advantage in device fabrication. In addition, power conversion efficiency (PCE) of the ZnO:PEI CBL based device was also improved when compared to that of ZnO-only and PEI-only devices. The highest PCE of P3HT:PC 61 BM and PTB7-Th:PC 61 BM devices reached to 3.57% and 8.16%, respectively. More importantly, there is no obvious device performance loss with the increase of the layer thickness of ZnO:PEI CBL to 60 nm in organic solar cells, which is in contrast to the PEI based devices, whose device performance decreases dramatically when the PEI layer thickness is higher than 6 nm. Such a nano composite material is also applicable in inverted heterojunction perovskite solar cells. A PCE of 11.76% was achieved for the perovskite solar cell with a thick ZnO:PEI CBL (150 nm) CBL, which is around 1.71% higher than that of the reference cell without CBL, or with ZnO CBL. In addition, stability of the organic and perovskite solar cells having ZnO:PEI CBL was also found to be improved in comparison with that of PEI based device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
2. Development of inverted organic solar cells with TiO2 interface layer by using low-temperature atomic layer deposition10.1021/am302252p ↗
3. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
6. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
7. The roles of poly(ethylene oxide) electrode buffers in efficient polymer photovoltaics10.1002/aenm.201100314 ↗
8. Imidazolium-substituted polythiophenes as efficient electron transport materials improving photovoltaic performance10.1002/aenm.201300049 ↗
9. Interface engineering of perovskite hybrid solar cells with solution-processed perylene-diimide heterojunctions toward high performance10.1021/cm5037919 ↗
10. Perylene diamides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗
11. Parameters affecting I–V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
12. Effect of PEI cathode interlayer on work function and interface resistance of ITO electrode in the inverted polymer solar cells10.1016/j.orgel.2014.11.023 ↗
13. A work-function tunable polyelectrolyte complex (PEI: PSS) as a cathode interfacial layer for inverted organic solar cells10.1039/C4TA00289J ↗
14. Inverted tandem polymer solar cells with polyethylenimine-modified MoOx/Al2O3:ZnO nanolaminate as the charge recombination layers10.1002/aenm.201400048 ↗
15. High open circuit voltage solution-processed tandem organic photovoltaic cells employing a bottom cell using a new medium band gap semiconducting polymer10.1021/cm401527b ↗
16. Improved high-efficiency perovskite planar heterojunction solar cells via incorporation of a polyelectrolyte interlayer10.1021/cm502864s ↗
17. High-efficiency inverted polymer solar cells controlled by the thickness of polyethylenimine ethoxylated (PEIE) interfacial layers10.1039/C4CP03484H ↗
18. Polyethylenimine aqueous solution: a low-cost and environmentally friendly formulation to produce low-work-function electrodes for efficient easy-to-fabricate organic solar cells10.1021/am5077974 ↗
19. PEIE capped ZnO as cathode buffer layer with enhanced charge transfer ability for high efficiency polymer solar cells10.1016/j.synthmet.2015.02.021 ↗
20. Printable highly conductive conjugated polymer sensitized ZnO NCs as cathode interfacial layer for efficient polymer solar cells10.1021/am501001v ↗
21. Zinc oxide:conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells10.1016/j.solmat.2015.05.039 ↗
22. Power conversion efficiency and device stability improvement of inverted perovskite solar cells by using a ZnO: PFN composite cathode buffer layer10.1021/acsami.6b03724 ↗
23. Solution-processed zinc oxide/polyethylenimine nanocomposites as tunable electron transport layers for highly efficient bulk heterojunction polymer solar cells10.1021/acsami.5b00521 ↗
24. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
25. Solvent treatment effect of the PEDOT: PSS anode interlayer in inverted planar perovskite solar cells10.1039/C5RA25787E ↗
26. Universal correlation between fibril width and quantum efficiency in diketopyrrolopyrrole-based polymer solar cells10.1021/ja4101003 ↗
27. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
28. Polymer solar cells with efficiency > 10% enabled via a facile solution-processed Al-doped ZnO electron transporting layer10.1002/aenm.201500204 ↗
29. Electrical and optical properties of ZnO processed by atomic layer deposition in inverted polymer solar cell10.1021/jp106641j ↗
30. Influence of interfacial buffer layers on thermal stability of P3HT: PC61BM solar cells10.3866/PKU.WHXB201505142 ↗