journal article·2016-05

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate films with low conductivity and low acidity through a treatment of their solutions with probe ultrasonication and their application as hole transport layer in polymer solar cells and perovskite solar cells

Shupeng Zhang, Zhimeng Yu, Pengcheng Li, Bichen Li, Furkan Halis Isikgor, Donghe Du, Kuan Sun, Yijie Xia, Jianyong Ouyang

Publisher page

Abstract

Abstract Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been widely used as the hole transport material in optoelectronic devices. To avoid the cross talk among different crossbars, PEDOT:PSS with low conductivity is required. It thus has a high loading of the non-conductive PSSH. The PSSH-to-PEDOT weight ratio is 6 for Clevios P VP Al 4083 that is the most popular polymer as the hole transport layer. However, the acidic PSSH brings severe problems to the device stability and performance. Here, PEDOT:PSS solutions with low acidity can be prepared through a facile treatment of PEDOT:PSS solution by probe ultrasonication. Two grades of PEDOT:PSS, Clevios PH1000 and Clevios P, with a PSSH-to-PEDOT weight ratio of 2.5 were treated by probe ultrasonication. The ultrasonication can lower the viscosity and the colloidal sizes of PEDOT:PSS solutions and conductivity of PEDOT:PSS films. The pH value of probe-ultrasonicated Clevios P was 2.12, higher than that (1.77) of pristine Clevios P VP Al 4083. The ultrasonication-treated PEDOT:PSS solutions were used as hole transport layer in polymer solar cells and perovskite solar cells. The photovoltaic performances of these solar cells are comparable to that of control devices employing Clevios P VP Al 4083 PEDOT:PSS as the hole transport layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Solution-deposited PEDOT for transparent conductive applications10.1557/mrs.2011.232 ↗
2. Review on application of PEDOTs and PEDOT: PSS in energy conversion and storage devices10.1007/s10854-015-2895-5 ↗
3. Improvement in the photovoltaic efficiency of polymer solar cells by treating the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer with co-solvents of hydrophilic organic solvents and hydrophobic 1,2-dichlorobenzene10.1016/j.solmat.2011.09.039 ↗
4. High-performance polymer solar cells with a conjugated zwitterion by solution processing or thermal deposition as the electron-collection interlayer10.1039/c2jm35221d ↗
5. Improved efficiency and stability of polymer solar cells utilizing two-dimensional reduced graphene oxide: graphene oxide nanocomposites as hole collection material10.1021/am506326y ↗
6. Morphology change and improved efficiency in organic photovoltaics via hexa-peri-hexabenzocoronene templates10.1021/am5015666 ↗
7. The role of solvent vapor annealing in highly efficient air-processed small molecule solar cells10.1039/c4ta01125b ↗
8. Efficiency enhancement of planar perovskite solar cells by adding zwitterion/LiF double interlayers for electron collection10.1039/C4NR05975A ↗
9. Transparent conductive oxide-free perovskite solar cells with PEDOT: PSS as transparent electrode10.1021/acsami.5b03171 ↗
10. A molecular nematic liquid crystalline material for high-performance organic photovoltaics10.1038/ncomms7013 ↗
11. Effects of organic inorganic hybrid perovskite materials on the electronic properties and morphology of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and the photovoltaic performance of planar perovskite solar cells10.1039/C5TA03456F ↗
12. Effect of molecular weight on the properties and organic solar cell device performance of a donor-acceptor conjugated polymer10.1039/C4PY01631A ↗
13. Polymer light-emitting diodes with polyethylene dioxythiophene-polystyrene sulfonate as the transparent anode10.1016/S0379-6779(97)03823-X ↗
14. Hydrogen bonding in bulk heterojunction solar cells: a case study10.1038/srep05701 ↗
15. Interfacial engineering of self-assembled monolayer modified semi-roll-to-roll planar heterojunction perovskite solar cells on flexible substrates10.1039/C5TA07008B ↗
16. Efficient perovskite hybrid solar cells by highly electrical conductive PEDOT: PSS hole transport layer
17. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
18. Salt-induced charge screening and significant conductivity enhancement of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)10.1021/ma900327d ↗
19. Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films through a treatment with organic carboxylic acids and inorganic acids10.1021/am900708x ↗
20. Anion effect on salt-induced conductivity enhancement of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films10.1016/j.orgel.2010.04.007 ↗
21. PEDOT: PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
22. Highly conductive PEDOT: PSS films prepared through a treatment with geminal diols or amphiphilic fluoro compounds10.1016/j.orgel.2012.05.039 ↗
23. Highly conductive PEDOT: PSS films prepared through a treatment with zwitterions and their application in polymer photovoltaic cells10.1039/c0jm01593h ↗
24. Highly conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) films treated with an amphiphilic fluoro compound as the transparent electrode of polymer solar cells10.1039/C1EE02475B ↗
25. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
26. Solution-processed PEDOT: PSS films with conductivities as indium tin oxide through a treatment with mild and weak organic acids10.1021/am404113n ↗
27. Bendable ITO-free organic solar cells with highly conductive and flexible PEDOT: PSS electrodes on plastic substrates10.1021/acsami.5b02830 ↗
28. Optical properties and conductivity of PEDOT: PSS films treated by polyethylenimine solution for organic solar cells10.1016/j.orgel.2015.03.010 ↗
29. A nonionic surfactant simultaneously enhancing wetting property and electrical conductivity of PEDOT: PSS for vacuum-free organic solar cells10.1016/j.solmat.2015.02.024 ↗
30. Conductivity enhancement of PEDOT: PSS films via phosphoric acid treatment for flexible all-plastic solar cells10.1021/acsami.5b03309 ↗
31. Highly conductive PEDOT: PSS treated with formic acid for ITO-free polymer solar cells10.1021/am405024d ↗
32. The critical choice of PEDOT: PSS additives for long term stability of roll-to-roll processed OPVs10.1002/aenm.201401912 ↗
33. Improving the stability of bulk heterojunction solar cells by incorporating pH-neutral PEDOT: PSS as the hole transport layer10.1021/am500336s ↗
34. pH-neutral PEDOT: PSS as hole injection layer in polymer light emitting diodes10.1016/j.orgel.2010.12.015 ↗
35. Layered V2O5/PEDOT nanowires and ultrathin nanobelts fabricated with a silk reelinglike process10.1021/acs.chemmater.5b02512 ↗
36. High-concentration solvent exfoliation of graphene10.1002/smll.200902066 ↗
37. Ultrasonication-assisted ultrafast reduction of graphene oxide by zinc powder at room temperature10.1016/j.carbon.2011.08.019 ↗
38. Significant different conductivities of the two grades of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), clevios P and clevios PH1000, arising from different molecular weights10.1021/am300881m ↗
39. Characterisation of TiN coatings and of the TiN/Si interface by X-ray photoelectron spectroscopy and auger electron spectroscopy10.1016/0169-4332(93)90241-3 ↗
40. Fullerene core star-like polymers—1. Preparation from fullerenes and monoazidopolyethers10.1016/S0014-3057(97)00225-5 ↗
41. Characterization of pulsed-plasma-polymerized aromatic films10.1021/la970953j ↗
42. Wanger · 1979
43. Surface characterization of carbon fibers using angle-resolved XPS and ISS10.1016/0008-6223(94)00144-O ↗
44. Effect of electrolyte solvent on the conductivity and structure of as-prepared polypyrrole films10.1016/S0032-3861(96)00749-5 ↗