Adhesion properties of inverted polymer solarcells: Processing and film structure parameters
Source abstract
Abstract
Abstract We report on the adhesion of weak interfaces in inverted P3HT:PCBM-based polymer solar cells (OPV) with either a conductive polymer, PEDOT:PSS, or a metal oxide, molybdenum trioxide (MoO 3 ), as the hole transport layer. The PEDOT:PSS OPVs were prepared by spin or spray coating on glass substrates, or slot-die coating on flexible PET substrates. In all cases, we observed adhesive failure at the interface between the P3HT:PCBM with PEDOT:PSS layer. The adhesion energy measured for the solar cells made on glass substrates was about 1.8 J/m 2 , but only 0.5 J/m 2 for the roll-to-roll processed flexible solar cells. The adhesion energy was insensitive to the PEDOT:PSS layer thickness in the range of 10–40 nm. A marginal increase in adhesion energy was measured with increased O 2 plasma power. Compared to solution processed PEDOT:PSS, we found that thermally evaporated MoO 3 adheres less to the P3HT:PCBM layer, which we attributed to the reduced mixing at the MoO 3 /P3HT:PCBM interface during the thermal evaporation process. Insights into the mechanisms of delamination and the effect of different material properties and processing parameters yield general guidelines for the design of more reliable organic photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
2. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Solar cell efficiency tables (Version 39)10.1002/pip.2163 ↗
5. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
6. Long-term operational lifetime and degradation analysis of P3HT: PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
7. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
8. Adhesion and debonding of multi-layer thin film structures10.1016/S0013-7944(98)00052-6 ↗
9. Adhesion and reliability of polymer/inorganic interfaces10.1115/1.2792642 ↗
10. Anomalous debonding behavior of a polymer/inorganic interface10.1016/j.actamat.2007.02.012 ↗
11. Interlayer adhesion in roll-to-roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
12. Cohesion and device reliability in organic bulk heterojunction photovoltaic cells10.1016/j.solmat.2011.11.035 ↗
13. S.R. Dupont, E. Voroshazi, P. Heremans, R.H. Dauskardt The effect of anneal, solar irradiation and humidity on the adhesion/cohesion properties of P3HT:PCBM based inverted polymer solar cells, in: Photovoltaic Specialists Conference (PVSC) 2012 38th IEEE, 2012 pp. 003259–003262.10.1109/PVSC.2012.6318272 ↗
14. Molecular structure and fracture properties of ZrOX/epoxysilane hybrid films10.1007/s10971-010-2262-1 ↗
15. Mechanical characterization of PEDOT:PSS thin films10.1016/j.synthmet.2008.11.005 ↗
16. S.R. Dupont, E. Voroshazi, P. Heremans, R.H. Dauskardt Moisture assisted decohesion of PEDOT:PSS conducting films, in progress, 2012.
17. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
18. Light stability of 3,4-ethylenedioxythiophene-based derivatives10.1016/S0379-6779(02)00457-5 ↗
19. Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
20. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
21. Efficient polymer photovoltaic cells using solution-processed MoO3 as anode buffer layer10.1016/j.solmat.2010.01.004 ↗
22. Augmented double cantilever beam model for studying crack-propagation and arrest10.1007/BF00035958 ↗
23. Characterization of the PEDOT-PSS system by means of X-ray and ultraviolet photoelectron spectroscopy10.1016/S0040-6090(99)00422-8 ↗
24. Depth profiling of organic films with X-ray photoelectron spectroscopy using C(60)(+) and Ar(+) co-sputtering10.1021/ac702626n ↗
25. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends10.1038/nmat2102 ↗
26. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
27. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
28. Substrate–dependent interface composition and charge transport in films for organic photovoltaics10.1063/1.3149706 ↗
29. Photoelectron spectroscopy of thin films of PEDOT-PSS conjugated polymer blend: a mini-review and some new results10.1016/S0368-2048(01)00323-1 ↗
30. The consequences of interface mixing on organic photovoltaic device characteristics10.1002/adfm.201002014 ↗
31. A.V. Kearney, H. Chang, M.E. Mills, R.H. Dauskardt, Influence of porosity and film thickness on adhesion of nanoporous organic dielectrics, in: Advanced Metallization Conference 2006 (AMC 2006), 2007, pp. 517–520.
32. Adhesion of polymer thin-films and patterned lines10.1023/A:1024940132299 ↗
33. Plasticity contributions to interface adhesion in thin-film interconnect structures10.1557/JMR.2000.0395 ↗
34. Models of interface separation accompanied by plastic dissipation at multiple scales10.1023/A:1018627712739 ↗
35. Elastic moduli of organic electronic materials by the buckling method10.1021/ma900137k ↗
36. Adhesion of metal/polymer bonds using PBT, PC, PS and copper
37. Effect of oxygen plasma treatment on adhesion improvement of Au deposited on Pa-c substrates
38. Chemical pathways in the interactions of reactive metal atoms with organic surfaces: vapor deposition of Ca and Ti on a methoxy-terminated alkanethiolate monolayer on Au10.1021/jp0506484 ↗
39. Polymer surfaces and interfaces in light-emitting devices10.1109/2944.669456 ↗
40. Reactions of low work function metals Na, Al, and Ca on alpha, omega-diphenyltetradecaheptaene – implications for metal/polymer interfaces10.1063/1.467035 ↗
41. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
42. Surface-properties of commercial polymer-films following various gas plasma treatments10.1002/app.1991.070430901 ↗
43. All-spin-coating vacuum-free processed semi-transparent inverted polymer solar cells with PEDOT:PSS anode and PAH-D interfacial layer10.1016/j.orgel.2010.04.012 ↗