journal article·2024-04

Impact of crystallinity and grain density on the charge-carrier distribution and transport in organic semiconductors

Yubo Geng, Ying Han, Liangtao Xiong, Haoyuan Li

Organic Electronics· Volume 127
Publisher page

Abstract

The crystalline and amorphous phases often coexist in the organic active layers of their electronic devices, which further undergo morphological changes over time. Understanding of the characteristics of the microscopic processes in polycrystalline organic films is essential for optimizing organic semiconductors and their devices, particularly in the context of flexible electronics. Here, we systematically investigate the charge-carrier distributions and transport in polycrystalline organic films, focusing on the impact of the crystallinity and grain density. These polycrystalline morphology data were generated from an efficient Monte Carlo method, which were then incorporated into molecular-level device simulations that can describe the microscopic charge-transport processes. These results demonstrate the distributions and transport characteristics of charge carriers in different phases of the polycrystalline organic semiconductor films, as well as the influencing factors. Importantly, we show that the influence of a polycrystalline morphology becomes more pronounced at low driving voltages, which has been the subject of significant research efforts. Our study also revealed a decrease in mobility at low crystallinities, a phenomenon that was not previously anticipated.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (95)

Show source-provided references
1. Charge transport in organic semiconductors10.1021/cr050140x ↗
2. Charge transport in disordered organic materials and its relevance to thin-film devices: a tutorial review10.1002/adma.200803541 ↗
3. Molecular packing: another key point for the performance of organic and polymeric optoelectronic materials10.1021/acs.accounts.0c00060 ↗
4. The key role of molecular packing in luminescence property: from adjacent molecules to molecular aggregates
5. Isomer dependent molecular packing and carrier mobility of N-phenylcarbazole–phenanthro[9,10-d]imidazole based materials as hosts for efficient electrophosphorescence devices10.1039/C9TC04522H ↗
6. Elucidating the impact of molecular packing and device architecture on the performance of nanostructured perylene diimide solar cells10.1021/acsami.5b00827 ↗
7. Excited-state dynamics in all-polymer blends with polymerized small-molecule acceptors
8. Comparing the microstructure and photovoltaic performance of 3 perylene imide acceptors with similar energy levels but different packing tendencies10.1039/D1TC05037K ↗
9. Influence of intermolecular interactions of electron donating small molecules on their molecular packing and performance in organic electronic devices10.1039/c3ta13266h ↗
10. Molecular packing and charge transport behaviors of semiconducting polymers over a wide temperature range
11. Solution-processed isoindigo- and thienoisoindigo-based donor–acceptor–donor π-conjugated small molecules: synthesis, morphology, molecular packing, and field-effect transistor characterization10.1021/acsami.2c18049 ↗
12. Scanning tunneling microscopy investigations of self-organized poly(3-hexylthiophene) two-dimensional polycrystals10.1002/adma.200304580 ↗
13. High-field-effect mobility of low-crystallinity conjugated polymers with localized aggregates10.1021/jacs.6b01046 ↗
14. Machine learning identifies strong electronic contacts in semiconducting polymer melts10.1021/acs.macromol.3c00987 ↗
15. Aggregation structure and glass transition of intrinsically stretchable semiconducting polymers10.1016/j.matt.2023.05.042 ↗
16. Grain boundary engineering of organic semiconductor films in organic transistors10.1002/agt2.379 ↗
17. Impact of nanoscale morphology on charge carrier delocalization and mobility in an organic semiconductor10.1002/adma.202104852 ↗
18. Toward design of novel materials for organic electronics
19. Modeling of organic light emitting diodes: from molecular to device properties10.1002/adfm.201403004 ↗
20. Multiscale simulation of charge transport in a host material, N,N′-dicarbazole-3,5-benzene (mCP), for organic light-emitting diodes10.1039/C5TC00543D ↗
21. From charge transport parameters to charge mobility in organic semiconductors through multiscale simulation10.1039/c3cs60319a ↗
22. Diffusion-limited crystallization: a rationale for the thermal stability of non-fullerene solar cells10.1021/acsami.9b04554 ↗
23. Doped highly crystalline organic films: toward high-performance organic electronics10.1002/advs.202003519 ↗
24. Critical role of Alkyl chain branching of organic semiconductors in enabling solution-processed N-channel organic thin-film transistors with mobility of up to 3.50 cm2 V–1 s–110.1021/ja311469y ↗
25. Humidity-induced crystallization of tris (8-hydroxyquinoline) aluminum layers in organic light-emitting devices10.1063/1.120867 ↗
26. Ambient processable and stable all-polymer organic solar cells
27. Molecular interactions that drive morphological and mechanical stabilities in organic solar cells10.1016/j.joule.2023.06.002 ↗
28. Powering the future: a critical review of research progress in enhancing stability of high‐efficiency organic solar cells
29. Achieving record‐high stretchability and mechanical stability in organic photovoltaic blends with a dilute‐absorber strategy
30. Mechanical, morphological, and charge transport properties of NDI polymers with variable built‐in Π‐conjugation lengths probed by simulation and experiment
31. Tunable crystallinity in regioregular poly(3-hexylthiophene) thin films and its impact on field effect mobility10.1002/adfm.201002729 ↗
32. A quantitative correlation between the mobility and crystallinity of photo-cross-linkable P3HT10.1021/ma202203z ↗
33. Grain size dependent mobility in polycrystalline organic field-effect transistors10.1016/S0379-6779(00)01351-5 ↗
34. Effect of morphology on organic thin film transistor sensors10.1007/s00216-005-0137-z ↗
35. The prediction of hole mobility in organic semiconductors and its calibration based on the grain-boundary effect10.1039/C6CP02993K ↗
36. Crystal-domain orientation and boundary in highly ordered organic semiconductor thin film10.1021/acs.jpcc.5b03727 ↗
37. Influence of the charge carrier mobility on the dynamic behavior and performance of the single-layer OLED10.1016/j.ijleo.2015.09.123 ↗
38. Enhanced performance of OLED based on molecular orientation of emission layer by optimized substrate temperature10.1007/s10854-021-05836-3 ↗
39. Importance of high-electron mobility in polymer acceptors for efficient all-polymer solar cells: combined engineering of backbone building unit and regioregularity10.1002/adfm.202108508 ↗
40. “N-π-N” type oligomeric acceptor achieves an OPV efficiency of 18.19% with low energy loss and excellent stability
41. Overcoming microstructural limitations in water processed organic solar cells by engineering customized nanoparticulate inks10.1002/aenm.201702857 ↗
42. Advances in morphology control of organic semiconductor enabled organic transistor-based chemical sensors10.1039/D2ME00020B ↗
43. Organic semiconductor colloids: from the knowledge acquired in photovoltaics to the generation of solar hydrogen fuel10.1016/j.cocis.2021.101511 ↗
44. Tethered small‐molecule acceptor refines hierarchical morphology in ternary polymer solar cells: enhanced stability and 19% efficiency
45. Over 18% efficiency ternary organic solar cells with 300 nm thick active layer enabled by an oligomeric acceptor
46. Asymmetric alloy acceptor strategy guided by similarity principle enables highly efficient and stable organic solar cells
47. Unique assembly of giant star-shaped trimer enables non-halogen solvent-fabricated, thermal stable, and efficient organic solar cells10.1016/j.joule.2023.09.001 ↗
48. Quantitative determination of organic semiconductor microstructure from the molecular to device scale10.1021/cr3001109 ↗
49. X-Ray scattering from films of semiconducting polymers10.1080/15583720802231734 ↗
50. Molecular order in high-efficiency polymer/fullerene bulk heterojunction solar cells10.1021/nn202951e ↗
51. Ultrasonic field induces better crystallinity and abundant defects at grain boundaries to develop cus electromagnetic wave absorber10.1002/adma.202305586 ↗
52. Nanoscale morphology of doctor bladed versus spin-coated organic photovoltaic films10.1002/aenm.201701269 ↗
53. Tuning conversion efficiency in metallo endohedral fullerene-based organic photovoltaic devices10.1002/adfm.200900214 ↗
54. Endohedral fullerenes for organic photovoltaic devices10.1038/nmat2379 ↗
55. Deconstructing 3D structured materials by modern ultramicrotomy for multimodal imaging and volume analysis across length scales
56. Interplay between doping, morphology, and lattice thermal conductivity in PEDOT:PSS10.1002/adfm.202215125 ↗
57. The impact of grain boundaries on charge transport in polycrystalline organic field-effect transistors10.1002/adom.202100115 ↗
58. Predicting charge mobility of organic semiconductors with complex morphology10.1021/acs.macromol.8b01727 ↗
59. Energy barriers at grain boundaries dominate charge carrier transport in an electron-conductive organic semiconductor10.1038/s41598-018-33308-y ↗
60. Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology10.1021/nl051098o ↗
61. A lattice model approach to the morphology formation from ternary mixtures during the evaporation of one component10.1140/epjst/e2019-800140-1 ↗
62. Modeling disordered morphologies in organic semiconductors10.1002/jcc.23445 ↗
63. The relative importance of domain size, domain purity and domain interfaces to the performance of bulk-heterojunction organic photovoltaics10.1039/c2ee21327c ↗
64. Kinetics of crystallization and glass transition in amorphous materials10.1021/acs.cgd.9b00651 ↗
65. Monte Carlo simulations of phase transitions and nucleation10.1063/5.0034744 ↗
66. Modeling of actual-size organic electronic devices from efficient molecular-scale simulations
67. Understanding charge transport in donor/acceptor blends from large-scale device simulations based on experimental film morphologies10.1039/C9EE03791H ↗
68. Organic photovoltaics10.1039/b812502n ↗
69. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
70. Monte Carlo morphological modelling of a P3HT:PCBM bulk heterojunction organic solar cell10.1002/polb.23627 ↗
71. Quantifying the relation between the morphology and performance of polymer solar cells using Monte Carlo simulations10.1063/1.2956689 ↗
72. Thermal effect on the morphology and performance of organic photovoltaics10.1039/C6CP04019E ↗
73. Dynamic Monte Carlo simulation for highly efficient polymer blend photovoltaics10.1021/jp907167u ↗
74. A microscopic model for the behavior of nanostructured organic photovoltaic devices10.1063/1.2718865 ↗
75. Morphology formation in binary mixtures upon gradual destabilisation10.1039/C9SM01344J ↗
76. A mesoscopic lattice model for morphology formation in ternary mixtures with evaporation, Commun10.1016/j.cnsns.2023.107083 ↗
77. Constructing high‐performance solar cells and photodetectors with a doping‐free polythiophene hole transport material
78. Disorder-controlled efficient doping of conjugated polymers for high-performance organic thermoelectrics
79. A closure scheme for chemical master equations10.1073/pnas.1306481110 ↗
80. Impurity conduction at low concentrations10.1103/PhysRev.120.745 ↗
81. Theoretical modelling of carrier transports in molecular semiconductors: molecular design of triphenylamine dimer systems10.1088/0957-4484/18/42/424029 ↗
82. Influences of crystal structures and molecular sizes on the charge mobility of organic semiconductors: oligothiophenes10.1021/cm8002172 ↗
83. Understanding lattice strain-controlled charge transport in organic semiconductors: a computational study10.1002/adfm.201400261 ↗
84. Elucidating the crucial role of hole injection layer in degradation of organic light-emitting diodes10.1021/am5072628 ↗
85. Flexible organic light-emitting devices with copper nanowire composite transparent conductive electrode10.1007/s10853-018-2986-9 ↗
86. Dependence of charge injection on temperature, electric field, and energetic disorder in an organic semiconductor10.1103/PhysRevLett.98.066101 ↗
87. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
88. A brief history of OLEDs—emitter development and industry milestones10.1002/adma.202005630 ↗
89. Recent advances in OLED optical design10.1002/adfm.201808803 ↗
90. Efficient red electroluminescent devices with very low operation voltage by utilizing hole and electron transport materials as the host10.1016/j.tsf.2020.138474 ↗
91. Highly efficient exciplex-based OLEDs incorporating a novel electron donor10.1039/D0QM00116C ↗
92. Highly efficient, ultralow turn-on voltage red and white organic light-emitting devices based on a novel exciplex host10.1039/D0MA01005G ↗
93. Thienothiophenyl-isoquinoline iridium complex-based deep red to near-infrared organic light-emitting diodes with low driving voltage and high radiant emittance for practical biomedical applications10.1002/adpr.202170032 ↗
94. Efficient interfacial upconversion enabling bright emission at an extremely low driving voltage in organic light-emitting diodes
95. Charge carrier transporting molecular materials and their applications in devices10.1021/cr050143+ ↗