N-phenylindole-diketopyrrolopyrrole-containing narrow band-gap materials for dopant-free hole transporting layer of perovskite solar cell
Source abstract
Abstract
Abstract Novel conjugated materials, DPIO and DPIE, having same molecular configuration of both an electron donating N -phenylindole and an electron accepting diketopyrrolopyrrole derivative, exhibited different aggregation behavior because of the applied side chains. When DPIO and DPIE were applied to as hole transporting materials in perovskite solar cell, DPIO showed better device performance than ones with DPIE, mostly due to the aggregation-assisted enhanced electrical property. DPIO effectively extracted hole from the perovskite layer, providing over 10% PCE of cell efficiency without any chemical doping. Incident-photon-to-electron conversion efficiency (IPCE) measurement confirmed that DPIO’s strong absorption in the longer wavelength region partly contributed to the light harvesting of the solar cell device. In addition, time-resolved photoluminescence (TRPL) and transient photovoltage (TPV) studies proved that the DPIO-based device, compared to the conventional Spiro-MeOTAD-based device, has better charge extraction ability and reduced charge recombination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
2. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
3. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
4. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
5. The light and shade of perovskite solar cells10.1038/nmat4065 ↗
6. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
7. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
8. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
9. Efficient planar heterojunction perovskite solar cells10.1038/nature12509 ↗
10. o-Methoxy substituents in spiro-OMeTAD for efficient inorganic–organic hybrid perovskite solar cells10.1021/ja502824c ↗
11. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
12. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
13. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
14. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
15. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
16. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
17. High-efficiency perovskite solar cells based in the black polymorph of HC(NH2)2PbI310.1002/adma.201401137 ↗
18. An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide10.1021/ja411014k ↗
19. Perovskite-based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach10.1002/adma.201304803 ↗
20. A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic–inorganic hybrid solar cells based on a perovskite10.1039/c3ee44174a ↗
21. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
22. Air-exposure induced dopant redistribution and energy level shifts in spin-coated spiro-MeOTAD films10.1021/cm504022q ↗
23. Efficient inorganic–organic hybrid perovskite solar cells based on pyrene arylamine derivatives as hole-transporting materials10.1021/ja410659k ↗
24. A simple 3,4-ethylenedioxythiophene based hole-transporting material for perovskite solar cells10.1002/anie.201310877 ↗
25. Low band gap S,N-heteroacene-based oligothiophenes as hole-transporting and light absorbing materials for efficient perovskite-based solar cells10.1039/C4EE01220H ↗
26. Perovskite solar cells with 12.8% efficiency by using conjugated quinolizino acridine based hole transporting material10.1021/ja503272q ↗
27. Stable and efficient perovskite solar cells based on titania nanotube arrays
28. A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic–inorganic hybrid solar cells based on a perovskite10.1039/c3ee44174a ↗
29. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
30. A dopant-free hole-transporting material for efficient and stable perovskite solar cells10.1039/C4EE01589D ↗
31. Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells10.1039/C6EE00709K ↗
32. A dopant-free organic hole transport material for efficient planar heterojunction perovskite solar cells10.1039/C5TA02502H ↗
33. A dopant-free spirobi[cyclopenta[2,1-b:3,4-b′]dithiophene] based hole-transport material for efficient perovskite solar cells10.1039/C5MH00154D ↗
34. Simple planar perovskite solar cells with a dopant-free benzodithiophene conjugated polymer as hole transporting material10.1039/C5TC01856K ↗
35. Dopant-free 3,3′-bithiophene derivatives as hole transport materials for perovskite solar cells10.1039/C6TA00032K ↗
36. Indole and triisopropyl phenyl as capping units for a diketopyrrolopyrrole (DPP) acceptor central unit: an efficient d–a–d type small molecule for organic solar cells10.1039/C3RA44926B ↗
37. The role of reversible oxidative addition in selective palladium(0)-catalyzed intramolecular cross-couplings of polyhalogenated substrates: synthesis of brominated indoles10.1021/ja1052335 ↗
38. Diketopyrrolopyrrole-based oligomer modified TiO2 nanorods for air-stable and all solution processed poly(3-hexylthiophene):TiO2 bulk heterojunction inverted solar cell10.1039/c2jm30334e ↗
39. Green fluorescent protein with anionic tryptophan-based chromophore and long fluorescence lifetime10.1016/j.bpj.2015.06.018 ↗
40. Effect of polymer aggregation on the open circuit voltage in organic photovoltaic cells: aggregation-induced conjugated polymer gel and its application for preventing open circuit voltage drop10.1021/am101067x ↗
41. Molecular design principle of lyotropic liquid-crystalline conjugated polymers with directed alignment capability for plastic electronics10.1038/nmat3595 ↗
42. Optimization of parameters for semiempirical methods I. Method10.1002/jcc.540100208 ↗
43. Electronic structures and photoconversion mechanism in perovskite/fullerene heterojunctions10.1002/adfm.201402692 ↗
44. Tris(2-(1H-pyrazol-1-yl)pyridine)cobalt(III) as p-type dopant for organic semiconductors and its application in highly efficient solid-state dye-sensitized solar cells10.1021/ja207367t ↗
45. Hole transport materials with low glass transition temperatures and high solubility for application in solid-state dye-sensitized solar cells10.1021/nn204296b ↗
46. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
47. Controllable Self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
48. Improved stability of perovskite solar cells in ambient air by controlling the mesoporous layer10.1039/C5TA02843D ↗
49. Hysteresis-less mesoscopic CH3NH3PbI3 perovskite hybrid solar cells by introduction of Li-treated TiO2 electrode10.1016/j.nanoen.2015.05.014 ↗
50. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗