Surface-tension release in PTAA-based inverted perovskite solar cells
Source abstract
Abstract
Abstract Perovskite solar cells (PSCs) with inverted planar heterojunction (p-i-n) structure have attracted wide attention due to their facile preparation and flexible application. So far, poly(bis{4-phenyl}{2,4,6-trimethylphenyl}amine) (PTAA) as the hole-transport material has promised the state-of-the-art performance for p-i-n PSCs. However, the hydrophobic nature of PTAA has two contradictory impacts on the PSCs performance, namely the perfect resistance of corrosion and hygroscopicity versus the large surface-tension and incomplete surface coverage of the photoactive perovskite film. To address this challenge, an inorganic potassium fluoride (KF) buffer layer was introduced onto the PTAA substrate to regulate the surface-energy difference between PTAA and the perovskite precursor. As a result, superb quality perovskite film was synthesized. In addition, the KF treatment also downward shifts the valence-band maximum (VBM) of the polymer toward the VBM of perovskite thus facilitating the hole extraction from the perovskite to PTAA and in turn enlarging both the short-circuit current density (JSC) and open-circuit voltage (VOC) Therewith, the planar inverted perovskite solar cell aided by KF realizes a champion power conversion efficiency (PCE) of 21.51% with a JSC of 23.95 mA/cm2, VOC of 1.09V, and fill factor of 82.4%. It is also important that optimized devices exhibit excellent long-term stability, with 90% of the original PCE retained after 30 days under ambient conditions (60% humidity).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Long-range balanced electronand hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
2. The emergence of perovskite solar cells10.1038/nphoton.2014.134 ↗
3. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
4. Electron-hole diffusion lengths>175 mm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
5. Standardizing perovskite solar modules beyond cells10.1016/j.joule.2019.08.015 ↗
6. Solution-processable perovskite solar cells toward commercialization: progress and challenges10.1002/adfm.201807661 ↗
7. From scalable solution fabrication of perovskite films towards commercialization of solar cells10.1039/C8EE03025A ↗
8. High-efficiency perovskite solar cells10.1021/acs.chemrev.0c00107 ↗
9. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
10. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
11. Composition engineering in doctor-blading of perovskite solar cells10.1002/aenm.201700302 ↗
12. Methylammonium-free, high-performance and stable perovskite solar cells on a planar architecture10.1126/science.aat3583 ↗
13. Stability improvement of tin‐based halide perovskite by precursor‐solution regulation with dual‐functional reagents10.1002/adfm.202104344 ↗
14. Highly efficient perovskite solar cells with a compositionally engineered perovskite/hole transporting material interface10.1039/C6EE03182J ↗
15. NiO/perovskite heterojunction contact engineering for highly efficient and stable perovskite solar cells10.1002/advs.201903044 ↗
16. High-performance solution-processed double-walled carbon nanotube transparent electrode for perovskite solar cells10.1002/aenm.201901204 ↗
17. A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules10.1038/nature23877 ↗
18. Large-grain double cation perovskites with 18 μs lifetime and high luminescence yield for efficient inverted perovskite solar cells10.1021/acsenergylett.0c02642 ↗
19. Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency invertedperovskite solarcells10.1038/s41560-019-0538-4 ↗
20. Regulating surface termination for efficient inverted perovskite solar cells with greater than 23% efficiency10.1021/jacs.0c09845 ↗
21. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
22. Two-step solvent post-treatment on PTAA for highly efficient and stable inverted perovskite solar cells10.1364/PRJ.398529 ↗
23. Interface engineering of solution-processed hybrid organohalide perovskite solar cells10.1021/acsami.8b02503 ↗
24. Local nearly non-strained perovskite lattice approaching a broad environmental stability window of efficient solar cells10.1016/j.nanoen.2020.104940 ↗
25. Precisely controlling the grain sizes with an ammonium hypophosphite additive for high‐performance perovskite solar cells10.1002/adfm.201802320 ↗
26. Ionic additive engineering toward high‐efficiency perovskite solar cells with reduced grain boundaries and trap density10.1002/adfm.201801985 ↗
27. Suppressing vacancy defects and grain boundaries via ostwald ripening for high-performance and stable perovskite solar cells10.1002/adma.201904347 ↗
28. Revealing energy loss and nonradiative recombination pathway in mixed-ion perovskite solar cells10.1021/acs.jpclett.0c02232 ↗
29. Mechanism of PbI2 in situ passivated perovskite films for enhancing the performance of perovskite solar cells10.1021/acsami.9b13648 ↗
30. In situ formation of compact PbI2 shell boosts the efficiency and thermostability of perovskite solar cells10.1002/smll.202001866 ↗
31. Interstitial occupancy by extrinsic alkali cations in perovskites and its impact on ion migration10.1002/adma.201707350 ↗
32. Graphitic carbon nitride doped SnO2 enabling efficient perovskite solar cells with PCEs exceeding 2210.1039/C9TA11344D ↗
33. Dual-protection strategy for high-efficiency and stable CsPbI2Br inorganic perovskite solar cells10.1021/acsenergylett.9b02716 ↗
34. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells10.1038/nenergy.2015.1 ↗
35. Extrinsic movable ions in MAPbI3 modulate energy band alignment in perovskite solar cells10.1002/aenm.201701981 ↗
36. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
37. Grain boundary healing of organic–inorganic halide perovskites for moisture stability10.1021/acs.nanolett.9b02721 ↗